please explain ...

Holm Tiffe holm at freibergnet.de
Thu Jul 19 02:39:06 PDT 2018


..what those inflationary appearing malloc disks are good for:

Jul 19 11:12:34 fly kernel: [drm] fb depth is 24
Jul 19 11:12:34 fly kernel: [drm]    pitch is 5888
Jul 19 11:12:34 fly kernel: drm0: debug: Error during ACPI methods call
Jul 19 11:12:34 fly kernel: [drm] Initialized radeon 2.40.0 20080528
Jul 19 11:12:34 fly kernel: md3: Malloc disk
Jul 19 11:12:34 fly kernel: md4: Malloc disk
Jul 19 11:12:35 fly kernel: md5: Malloc disk
Jul 19 11:12:35 fly kernel: md6: Malloc disk
Jul 19 11:12:35 fly kernel: md7: Malloc disk
Jul 19 11:12:40 fly kernel: md8: Malloc disk
Jul 19 11:12:50 fly kernel: md9: Malloc disk
Jul 19 11:12:51 fly kernel: md10: Malloc disk
Jul 19 11:12:51 fly kernel: md11: Malloc disk
Jul 19 11:12:51 fly kernel: md12: Malloc disk
Jul 19 11:12:51 fly kernel: md13: Malloc disk
Jul 19 11:12:51 fly kernel: md14: Malloc disk
Jul 19 11:12:51 fly kernel: md15: Malloc disk
Jul 19 11:12:51 fly kernel: md16: Malloc disk
Jul 19 11:12:51 fly kernel: md17: Malloc disk
Jul 19 11:12:51 fly kernel: md18: Malloc disk
Jul 19 11:12:57 fly kernel: pid 1305 (at-spi-bus-launc), uid 201: exited on signal 11

..and why my CDrom drive in the Laptop is generating lots of those ugly fault
messages:

Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 11 0 
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): CAM Status: SCSI Status Error
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): SCSI Status: Check Condition
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): ILLEGAL REQUEST csi:28,5,55,20 asc:64,0
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): Illegal mode for this track
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): Unretryable error
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): cddone: got error 0x6 back
Jul 19 11:12:03 fly kernel: dscheck(cd0): b_bcount 1536 is not on a sector boundary (ssize 2048)
Jul 19 11:12:03 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=26 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): CAM Status: SCSI Status Error
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): SCSI Status: Check Condition
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): ILLEGAL REQUEST csi:28,5,55,20 asc:64,0
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): Illegal mode for this track
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): Unretryable error
Jul 19 11:12:03 fly kernel: (cd0:ahci0:1:0:0): cddone: got error 0x6 back
Jul 19 11:12:03 fly kernel: dscheck(cd0): b_bcount 512 is not on a sector boundary (ssize 2048)
Jul 19 11:12:03 fly last message repeated 2 times
Jul 19 11:12:03 fly kernel: dscheck(cd0): b_bcount 8704 is not on a sector boundary (ssize 2048)
Jul 19 11:12:03 fly kernel: dscheck(cd0): b_bcount 1024 is not on a sector boundary (ssize 2048)
Jul 19 11:12:03 fly kernel: dscheck(cd0): b_bcount 1536 is not on a sector boundary (ssize 2048)

If I remove the audio CD in the drive I get the logs filled up with this
every second:

Jul 19 11:13:09 fly dbus[978]: [system] Successfully activated service 'org.mate.SettingsDaemon.DateTimeMechanism'
Jul 19 11:18:06 fly kernel: error: [drm:pid1241:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe B
Jul 19 11:19:14 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=3 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:14 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=5 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:16 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=6 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:18 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=8 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:20 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=10 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:22 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=12 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:24 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=14 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:26 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=16 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:28 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=18 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:30 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=20 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:32 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=22 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:34 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=24 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:36 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=26 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:38 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=28 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:40 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=30 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:42 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=0 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:44 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=3 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:47 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=5 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536
Jul 19 11:19:49 fly kernel: ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=7 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536


This is master from a week before or so.

Copyright (c) 2003-2018 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly v5.3.0.18339.g6fea5f-DEVELOPMENT #2: Wed Jul 11 15:25:04 CEST 2018
    holm at fly.tsht.lan:/usr/obj/usr/src/sys/FLY
acpi_hpet: frequency 14318180
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 1548 min=1164 max=2312
TSC clock: 2261254751 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz (2261.25-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Thermal and PM Features=0x1<SENSOR>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 4257410048 (4060 MB)
avail memory = 3899662336 (3719 MB)
lapic: divisor index 0, frequency 133015051 Hz
srat_probe: can't locate SRAT
SMI Frequency (worst case): 8 Hz (119811 us)
Initialize MI interrupts
Spectre: support=( none ) req=ffff operating=( none )
VMM: VMENTRY_LOAD_IA32_EFER not supported by this CPU
machdep.meltdown_mitigation enabled to protect against (mostly Intel)
meltdown bug
system call performance will be impacted
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
interrupt uses mplock: swi_taskq
ACPI: RSDP 0x00000000000F91A0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BDD90100 000094 (v01 LGE    LGPC     20081119 MSFT 00000097)
ACPI: FACP 0x00000000BDD90290 0000F4 (v03 111908 FACP1503 20081119 MSFT 00000097)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180629/tbfadt-750)
ACPI: DSDT 0x00000000BDD90680 00D53B (v01 H17HL  H17HL001 00000001 INTL 20051117)
ACPI: FACS 0x00000000BDD9E400 000040
ACPI: APIC 0x00000000BDD90390 00005C (v01 111908 APIC1503 20081119 MSFT 00000097)
ACPI: MCFG 0x00000000BDD90430 00003C (v01 111908 OEMMCFG  20081119 MSFT 00000097)
ACPI: SLIC 0x00000000BDD90470 000176 (v01 LGE    LGPC     20081119 MSFT 00000097)
ACPI: ECDT 0x00000000BDD90620 000054 (v01 111908 OEMECDT  20081119 MSFT 00000097)
ACPI: DBGP 0x00000000BDD903F0 000034 (v01 111908 DBGP1503 20081119 MSFT 00000097)
ACPI: BOOT 0x00000000BDD905F0 000028 (v01 111908 BOOT1503 20081119 MSFT 00000097)
ACPI: OEMB 0x00000000BDD9E440 000071 (v01 111908 OEMB1503 20081119 MSFT 00000097)
ACPI: HPET 0x00000000BDD9DBC0 000038 (v01 111908 OEMHPET  20081119 MSFT 00000097)
ACPI: GSCI 0x00000000BDD9E4C0 002024 (v01 111908 GMCHSCI  20081119 MSFT 00000097)
ACPI: ATKG 0x00000000BDDA06F0 008024 (v01 111908 OEMATKG  20081119 MSFT 00000097)
ACPI: SSDT 0x00000000BDDA91F0 0004E6 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: SSDT 0x00000000BDDB92F0 000EE5 (v01 SWVGA  SWVGA100 00001000 INTL 20051117)
ACPI: SSDT 0x00000000BDDBA1E0 001B63 (v01 LGE    wmi_acpi 00001000 INTL 20051117)
sc0: <System console> on motherboard
sc0: VGA <16 virtual consoles, flags=0x300>
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
cryptosoft0: <software crypto> on motherboard
acpi0: <LGE LGPC> on motherboard
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x66,0x62 on acpi0
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_timer0 on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800C7128540 000244 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF801244F8680 000712 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800C7100DC0 0000C8 (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80050608BE0 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
0xfdef0000-0xfdefffff,0xd0000000-0xdfffffff irq 16 at device 0.0 on pci1
hdac0: <ATI RV635 HDA Controller> mem 0xfdeec000-0xfdeeffff irq 17 at
device 0.1 on pci1
hdac0: link ctrl 0x810
hdac0: disable nosnoop
vgapci1: <VGA-compatible display> port 0xbc00-0xbc07 mem 0xc0000000-0xcfffffff,0xfd800000-0xfdbfffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci1
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci1: Boot video device
uhci0: <Intel 82801I (ICH9) USB controller> port 0xb880-0xb89f irq 16 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xb800-0xb81f irq 21 at device 26.1 on pci0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xb480-0xb49f irq 19 at device 26.2 on pci0
usbus1: 12Mbps Full Speed USB v1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfddfbc00-0xfddfbfff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3 on ehci0
hdac1: <Intel 82801I HDA Controller> mem 0xfddf4000-0xfddf7fff irq 22 at device 27.0 on pci0
hdac1: link ctrl 0x800
hdac1: disable nosnoop
usbus3: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel WiFi Link 5100> mem 0xfdffe000-0xfdffffff irq 17 at device 0.0 on pci3
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4: Disable PCI Express hot-plug interrupts(0x0008)
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci8: <ACPI PCI bus> on pcib7
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfcfe0000-0xfcfeffff,0xfcfff000-0xfcffffff irq 17 at device 0.0 on pci8
re0: MAC version 0x3c400000, MACFG 26, software TX defrag, pad runt
re0: bus speed 125MHz
re0: MAC address: 00:23:54:75:9b:79
uhci3: <Intel 82801I (ICH9) USB controller> port 0xb400-0xb41f irq 23 at device 29.0 on pci0
uhub0: 2 ports with 2 removable, self powered
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xb080-0xb09f irq 19 at
device 29.1 on pci0
usbus4: 12Mbps Full Speed USB v1.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub1: 2 ports with 2 removable, self powered
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xb000-0xb01f irq 18 at
device 29.2 on pci0
usbus5: 12Mbps Full Speed USB v1.0
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub2: 2 ports with 2 removable, self powered
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfddfb800-0xfddfbbff irq 23 at device 29.7 on pci0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: EHCI version 1.0
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib8
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xfebff800-0xfebfffff
irq 20 at device 1.0 on pci9
interrupt uses mplock: fwohci0
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:1e:8c:00:01:a6:08:56
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:1e:8c:a6:08:56
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
Unknown tcode 14
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
sdhci_pci0: <RICOH R5C822 SD> mem 0xfebff400-0xfebff4ff irq 21 at device
1.1 on pci9
sdhci_pci0: 1 slot(s) allocated
pci9: <base peripheral> (vendor 0x1180, dev 0x0843) at device 1.2 irq 21
pci9: <base peripheral> (vendor 0x1180, dev 0x0592) at device 1.3 irq 21
pci9: <base peripheral> (vendor 0x1180, dev 0x0852) at device 1.4 irq 21
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port
0xa400-0xa41f,0xa480-0xa483,0xa800-0xa807,0xa880-0xa883,0xac00-0xac07
mem 0xfddfb000-0xfddfb7ff irq 19 at device 31.2 on pci0
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ahci0: Intel hocus pocus
ahci0: AHCI 1.2 cap 0xeb20ffe3<S64A,NCQ,SSNTF,SSS,SAL,SCLO,PMD,SSC,PSC,CCCS,EMS,SXS>, 4
ports, 32 tags/port, gen 2 (3Gbps)
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <LG Innotek> at usbus7
ahci0.0: Found DISK "FUJITSU MHZ2320BH G2 00000009"
serial="K632T8B26NG0"
ahci0.0: tags=32/32 satacap=0706 satacap2=0000 satafea=004c NCQ=YES capacity=305245.33MB
ahci0.0: f85=3068 f86=be09 f87=6163 WC=enabled RA=enabled SEC=freezing
ahci0.1: Found ATAPI "HL-DT-ST DVDRAM GSA-T50N RR07" serial="K0988TM5548"
ahci0.1: tags=0/32 satacap=0402 satacap2=0000 satafea=0048 NCQ=NO capacity=1.00MB
ahci0.1: f85=4218 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=5 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=7 RFIS-34 flg=40 st=51 err=64 dev=40 off=0/1536
ahci0.4: Found DISK "FUJITSU MHZ2320BH G2 00000009" serial="K632T8B26NKF"
ahci0.4: tags=32/32 satacap=0706 satacap2=0000 satafea=004c NCQ=YES capacity=305245.33MB
ahci0.4: f85=3068 f86=be09 f87=6163 WC=enabled RA=enabled SEC=freezing
ugen2.2: <Broadcom Corp> at usbus2
ahci0.5: No device detected
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
interrupt uses mplock: psm0
psm0: model Generic PS/2 mouse, device ID 0
ACPI: Enabled 8 GPEs in block 00 to 3F
Freeing low dma reserve @ 0xfffff80114360000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC663 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC663 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC663 (Analog 2.0+HP/2.0)> at nid 20,33 and 24 on hdaa1
pcm2: <Realtek ALC663 (Onboard Analog Mic)> at nid 18 on hdaa1
CAM: Configuring 5 busses
ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=11 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA FUJITSU MHZ2320B 0000> Fixed Direct Access SCSI-4 device 
da0: Serial Number K632T8B26NG0
da0: 300.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
cd0 at ahci0 bus 1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-T50N RR07> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers
cd0: cd present [353057 x 2048 byte records]
da1 at ahci0 bus 4 target 0 lun 0
da1: <SATA FUJITSU MHZ2320B 0000> Fixed Direct Access SCSI-4 device 
da1: Serial Number K632T8B26NKF
da1: 300.000MB/s transfers
da1: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=18 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
(cd0:ahci0:1:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ahci0:1:0:0): CAM Status: SCSI Status Error
(cd0:ahci0:1:0:0): SCSI Status: Check Condition
(cd0:ahci0:1:0:0): ILLEGAL REQUEST csi:28,5,55,20 asc:64,0
(cd0:ahci0:1:0:0): Illegal mode for this track
(cd0:ahci0:1:0:0): Unretryable error
(cd0:ahci0:1:0:0): cddone: got error 0x6 back
cd0: reading primary partition table: error accessing offset 000000000000 for 2048
ahci0.1: TFES ccb=0xfffff801261a0cc0 slot=20 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536 (cd0:ahci0:1:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ahci0:1:0:0): CAM Status: SCSI Status Error
(cd0:ahci0:1:0:0): SCSI Status: Check Condition
(cd0:ahci0:1:0:0): ILLEGAL REQUEST csi:28,5,55,20 asc:64,0
(cd0:ahci0:1:0:0): Illegal mode for this track
(cd0:ahci0:1:0:0): Unretryable error
(cd0:ahci0:1:0:0): cddone: got error 0x6 back
cd0: reading primary partition table: error accessing offset 000000000000 for 2048
Mounting root from hammer2:serno/K632T8B26NKF.s1d
hammer2_mount: root 'serno/K632T8B26NKF.s1d'
hammer2_mount: dev="serno/K632T8B26NKF.s1d" label="ROOT" rdonly=1
hammer2: using volume header #1
hammer2_mount hmp=0xfffff80127020000 pmp=0xfffff80127641000
DMA space used: 22448k, remaining available: 131072k
Mounting devfs
hammer2_mount: '/dev/serno/K632T8B26NKF.s1d at ROOT'
hammer2_mount: dev="/dev/serno/K632T8B26NKF.s1d" label="ROOT" rdonly=1
hammer2 mount "serno/K632T8B26NKF.s1d":  freemap recovery
0000000000003a69-0000000000003a69
hammer2_mount: '/dev/serno/K632T8B26NKF.s1e at DATA'
hammer2_mount: dev="/dev/serno/K632T8B26NKF.s1e" label="DATA" rdonly=0
hammer2: using volume header #2
hammer2 mount "/dev/serno/K632T8B26NKF.s1e":  freemap recovery
0000000000006914-0000000000006914
hammer2_mount hmp=0xfffff801ac3dc000 pmp=0xfffff801aca11000
wlan0: driver didn't set altq_maxlen
wlan0: MAC address: 00:21:6b:04:4d:6e
iwn0: iwn_read_firmware: ucode rev=0x08530501
iwn0: iwn_read_firmware: ucode rev=0x08530501
swap low/high-water marks set to 167769/251654

Then there are the hangs on boot after

acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x66,0x62 on acpi0

I have to boot 3 or 4 times until the boot gets over that point,
sometimes I must boot Windows Vista (which still resides on the other
disk of this Computer) and shut it down again before I can boot over
that point above.

Maybe I'm a Noob..and have not enough time to read all the Mailing
lists or Manuals ..but I want to have those problems fixed.
I need the Notebook for some real work (Embedded development) and
decided after many years of using FreeBSD to give Dragonfly a try.
Dragonfly with mate seems to do a good job..if it's finally bootet and
if one can ignore that error messages. Are the problems fixable?
Is anyone besides me interested to get them fixed? I'm the only one with
that kind of problems? Should I switch back to FreeBSD?

Regards,

Holm

-- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, 
     Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
info at tsht.de Fax +49 3731 74200 Tel +49 3731 74222 Mobil: 0172 8790 741




More information about the Users mailing list