AsRock Vision3D 137D, NVidia GeForce 425 (X server conf)

George g.lister at nodeunit.com
Mon Mar 9 08:09:54 PDT 2015



On 15-03-09 03:26 PM, Zachary Crownover wrote:
> DragonFlyBSD and PCBSD are not comparable as you make them right now. 
> PCBSD takes almost everything from upstream FreeBSD and patches it 
> slightly for their system with a lot of GUI work to make the default 
> interface and configuration easier for you, but under the hood, it's 
> still 99% FreeBSD. DragonFlyBSD forked from FreeBSD 11 years ago and 
> has become it's own completely independent and separate project. There 
> is cross pollination of code from time to time, but it has diverged 
> greatly from FreeBSD. There is no Nvidia driver for DragonFlyBSD. The 
> PCBSD Nvidia driver works because it's written for FreeBSD, and 
> binaries compiled on those two will work on the other, they're using 
> the same kernel.
>  Vesa is sort of a last resort, and I don't remember if the nouveau is 
> up to date at all, we don't have Nvidia support at this time.

Hi Zachary,

Thanks for the response actually the nv driver lists a number of NVidia 
cards, that's probably nouveau, but unfortunately mine is not on the 
list. BTW I am not trying to make DragonFly the same as PC-BSD I know 
they are not I was just hoping that some drivers move over and maybe I 
was missing an update or maybe someone has gotten the same card to work.

I shall give it a few more tries as I would really like to give 
DragonFly a run as a system and see how it works for a daily driver so 
far I am really impressed by the speed.

Thanks for your time.
Cheers,
George

>
> On Mon, Mar 9, 2015 at 2:59 AM, George <g.lister at nodeunit.com 
> <mailto:g.lister at nodeunit.com>> wrote:
>
>     Hi guys,
>
>     I have the following question. I have an AsRock Vision 3D 137D
>     HTPC with i3 core and an NVidia GeForce 425 card.
>
>     I wish to use the system for a personal desktop and some
>     development etc.., the personal desktop is kind of a high priority
>     for this system for me.
>
>     I have managed to get a sort of decent, screen uses 1600x1200
>     instead of the 1920x1080 optimal fonts are streched etc. (I am
>     running XFCE), config for X see below:
>
>     # cat /etc/X11/xorg.conf
>     Section "ServerLayout"
>         Identifier     "X.org Configured"
>         Screen      0  "Screen0" 0 0
>         InputDevice    "Mouse0" "CorePointer"
>         InputDevice    "Keyboard0" "CoreKeyboard"
>     EndSection
>
>     Section "Files"
>         ModulePath   "/usr/local/lib/xorg/modules"
>         FontPath     "/usr/local/lib/X11/fonts/misc/"
>         FontPath     "/usr/local/lib/X11/fonts/TTF/"
>         FontPath     "/usr/local/lib/X11/fonts/OTF/"
>         FontPath     "/usr/local/lib/X11/fonts/Type1/"
>         FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>         FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>     EndSection
>
>     Section "Module"
>         Load  "glx"
>     EndSection
>
>     Section "InputDevice"
>         Identifier  "Keyboard0"
>         Driver      "kbd"
>     EndSection
>
>     Section "InputDevice"
>         Identifier  "Mouse0"
>         Driver      "mouse"
>         Option      "Protocol" "auto"
>         Option      "Device" "/dev/sysmouse"
>         Option      "ZAxisMapping" "4 5 6 7"
>     EndSection
>
>     Section "Monitor"
>         Identifier   "Monitor0"
>         VendorName   "Samsung"
>         ModelName    "BX2235 23inch LCD"
>         HorizSync 31.469-79.976 <tel:31.469-79.976>
>         VertRefresh 56.250-75.029 <tel:56.250-75.029>
>             Modeline     "1152x864_75.00"  104.00  1152 1224 1344 1536
>     864 867 871 905 -hsync +vsync
>             Modeline     "1280x800_59.81"   83.25  1280 1352 1480 1680
>     800 803 809 831 -hsync +vsync
>             Modeline     "1280x800_74.93"  106.25  1280 1360 1488 1696
>     800 803 809 838 -hsync +vsync
>             Modeline     "1280x1024_60.02"  109.00  1280 1368 1496
>     1712 1024 1027 1034 1063 -hsync +vsync
>             Modeline     "1280x1024_75.03"  138.75  1280 1368 1504
>     1728 1024 1027 1034 1072 -hsync +vsync
>         Modeline     "1440x900_59.89"  106.25  1440 1528 1672 1904 
>     900 903 909 934 -hsync +vsync
>             Modeline     "1440x900_74.98"  136.50  1440 1536 1688 1936
>     900 903 909 942 -hsync +vsync
>         Modeline     "1680x1200_60.00"  168.25  1680 1792 1968 2256
>     1200 1203 1213 1245 -hsync +vsync
>         Modeline     "1680x1050_59.95"  146.00  1680 1784 1960 2240
>     1050 1053 1059 1089 -hsync +vsync
>         Modeline     "1920x1080_60.00"  173.00  1920 2048 2248 2576
>     1080 1083 1088 1120 -hsync +vsync
>     EndSection
>
>     Section "Device"
>             ### Available Driver options are:-
>             ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>             ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
>             ### <percent>: "<f>%"
>             ### [arg]: arg optional
>             #Option     "ShadowFB"              # [<bool>]
>             #Option     "DefaultRefresh"        # [<bool>]
>             #Option     "ModeSetClearScreen"    # [<bool>]
>         Identifier  "Card0"
>         Driver      "vesa"
>         BusID       "PCI:1:0:0"
>     EndSection
>
>     Section "Screen"
>         Identifier "Screen0"
>         Device     "Card0"
>         Monitor    "Monitor0"
>         SubSection "Display"
>             Viewport   0 0
>             Depth     1
>             Modes     "1152x864_75.00" "1280x800_59.81"
>     "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>     "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>     "1680x1050_59.95" "1920x1080_60.00"
>         EndSubSection
>         SubSection "Display"
>             Viewport   0 0
>             Depth     4
>             Modes     "1152x864_75.00" "1280x800_59.81"
>     "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>     "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>     "1680x1050_59.95" "1920x1080_60.00"
>         EndSubSection
>         SubSection "Display"
>             Viewport   0 0
>             Depth     8
>             Modes     "1152x864_75.00" "1280x800_59.81"
>     "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>     "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>     "1680x1050_59.95" "1920x1080_60.00"
>         EndSubSection
>         SubSection "Display"
>             Viewport   0 0
>             Depth     15
>             Modes     "1152x864_75.00" "1280x800_59.81"
>     "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>     "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>     "1680x1050_59.95" "1920x1080_60.00"
>         EndSubSection
>         SubSection "Display"
>             Viewport   0 0
>             Depth     16
>             Modes     "1152x864_75.00" "1280x800_59.81"
>     "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>     "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>     "1680x1050_59.95" "1920x1080_60.00"
>         EndSubSection
>         SubSection "Display"
>             Viewport   0 0
>             Depth     24
>             Modes     "1152x864_75.00" "1280x800_59.81"
>     "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>     "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>     "1680x1050_59.95" "1920x1080_60.00"
>         EndSubSection
>     EndSection
>
>     I tried also the "nv" NVidia??? driver but I get back "GeForce 425
>     not supported" the other drivers are ATI etc.. which will ot work.
>
>     I have tried PC-BSD 10.1 release on the machine and it has an
>     NVidia driver which detects the card and everything looks OK on
>     the screen. DragonFly is a FreeBSD derivative just like PC-BSD. I
>     am wondering whether the driver has not been ported yet?? I have
>     used PC-BSD and it is very nice but it is kind of too slow
>     (compared to Ubuntu on the same machine) and I am having some
>     issues accessing an NetBSD NFS server it hangs with timeouts on
>     lockd ... anyway long story short. I decided to give DragonFly a
>     try and it is smocking fast to boot to shutdown to install
>     packages etc. ... if I could only get X setup it would be great.
>     Then I can move on to fighting HP printing etc. ;).
>
>     Here is a dmesg from the machine:
>
>     $ dmesg
>     Copyright (c) 2003-2014 The DragonFly Project.
>     Copyright (c) 1992-2003 The FreeBSD Project.
>     Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
>     1993, 1994
>         The Regents of the University of California. All rights reserved.
>     DragonFly v4.0.3-RELEASE #27: Thu Jan 22 17:19:56 PST 2015
>     root at pkgbox64.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC
>     TSC invariant clock: 2409543436 <tel:2409543436> Hz, i8254 clock:
>     1193223 Hz
>     CPU: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (2409.47-MHz
>     K8-class CPU)
>       Origin = "GenuineIntel"  Id = 0x20655  Stepping = 5
>     Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>     Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT>
>       AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>       AMD Features2=0x1<LAHF>
>       Thermal and PM Features=0x5<SENSOR,ARAT>
>       MONITOR/MWAIT Features=0x3<CST,INTBRK>
>     real memory  = 6433078272 (6135 MB)
>     avail memory = 6023581696 <tel:6023581696> (5744 MB)
>     lapic: divisor index 0, frequency 66929700 Hz
>     Initialize MI interrupts
>     TSC testing MP synchronization ...
>     TSC is MP synchronized
>     TSC: cputimer freq 75296071, shift 5
>     FQ scheduler policy version 1.1 loaded
>     wdog: In-kernel automatic watchdog reset enabled
>     kbd1 at kbdmux0
>     disk scheduler: set policy of vn0 to noop
>     disk scheduler: set policy of vn1 to noop
>     disk scheduler: set policy of vn2 to noop
>     disk scheduler: set policy of vn3 to noop
>     disk scheduler: set policy of md0 to noop
>     md0: Malloc disk
>     ACPI: RSDP 0x00000000000F9EF0 000014 (v00 ACPIAM)
>     ACPI: RSDT 0x00000000D3770000 000044 (v01 102410 RSDT1223 20101024
>     MSFT 00000097)
>     ACPI: FACP 0x00000000D3770200 000084 (v01 A_M_I  OEMFACP 12000601
>     MSFT 00000097)
>     ACPI: DSDT 0x00000000D3770460 0074A4 (v01 AS388  AS388115 00000115
>     INTL 20051117)
>     ACPI: FACS 0x00000000D3780000 000040
>     ACPI: APIC 0x00000000D3770390 00008C (v01 102410 APIC1223 20101024
>     MSFT 00000097)
>     ACPI: MCFG 0x00000000D3770420 00003C (v01 102410 OEMMCFG 20101024
>     MSFT 00000097)
>     ACPI: OEMB 0x00000000D3780040 000072 (v01 102410 OEMB1223 20101024
>     MSFT 00000097)
>     ACPI: AAFT 0x00000000D377A460 000027 (v01 102410 OEMAAFT 20101024
>     MSFT 00000097)
>     ACPI: HPET 0x00000000D377A490 000038 (v01 102410 OEMHPET 20101024
>     MSFT 00000097)
>     ACPI: ASF! 0x00000000D377A4D0 000099 (v32 LEGEND I865PASF 00000001
>     INTL 20051117)
>     ACPI: SSDT 0x00000000D37815F0 000363 (v01 DpgPmm CpuPm 00000012
>     INTL 20051117)
>     cryptosoft0: <software crypto> on motherboard
>     aesni0: No AESNI support.
>     padlock0: No ACE support.
>     rdrand0: No RdRand support.
>     acpi0: <102410 RSDT1223> on motherboard
>     ACPI: All ACPI Tables successfully acquired
>     ACPI FADT: SCI testing interrupt mode ...
>     ACPI FADT: SCI select level/high
>     ACPI: Executed 1 blocks of module-level executable AML code
>     objcache_reclaimlist
>     objcache_reclaimlist
>     objcache_reclaimlist
>     objcache_reclaimlist
>     acpi0: Power Button (fixed)
>     Warning: ACPI is disabling APM's device.  You can't run both
>     acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>     acpi_hpet0: <High Precision Event Timer> iomem
>     0xfed00000-0xfed003ff on acpi0
>     acpi_hpet0: frequency 14318180
>     pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>     pci0: <ACPI PCI bus> on pcib0
>     pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>     pci1: <ACPI PCI bus> on pcib1
>     pcib1: No _PRT found, routing with pci
>     pcib1: No _PRT found, routing with pci
>     vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem
>     0xd6000000-0xd7ffffff,0xd8000000-0xdfffffff,0xfa000000-0xfaffffff
>     irq 16 at device 0.0 on pci1
>     vgapci0: Boot video device
>     pci1: <multimedia, HDA> (vendor 0x10de, dev 0x0bea) at device 0.1
>     irq 17
>     pci0: <dasp> (vendor 0x8086, dev 0x0050) at device 4.0 irq 16
>     ehci0: <Intel PCH USB 2.0 controller USB-B> mem
>     0xf9ff8000-0xf9ff83ff irq 16 at device 26.0 on pci0
>     usbus0: EHCI version 1.0
>     usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
>     pci0: <multimedia, HDA> (vendor 0x8086, dev 0x3b56) at device 27.0
>     irq 22
>     pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
>     pci2: <ACPI PCI bus> on pcib2
>     re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe800-0xe8ff
>     mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8ffffff irq 16 at device
>     0.0 on pci2
>     re0: Hardware rev. 0x2c000000; PCI-E 125MHz
>     miibus0: <MII bus> on re0
>     rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
>     rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>     1000baseT, 1000baseT-FDX, auto
>     usbus0: 480Mbps High Speed USB v2.0
>     re0: MAC address: e0:69:95:1f:6d:81
>     pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
>     pci3: <ACPI PCI bus> on pcib3
>     xhci0: <NEC uPD720200 USB 3.0 controller> mem
>     0xfbdfe000-0xfbdfffff irq 17 at device 0.0 on pci3
>     ugen0.1: <Intel> at usbus0
>     uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>     usbus0
>     xhci0: 32 byte context size.
>     usbus1 on xhci0
>     pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
>     pci4: <ACPI PCI bus> on pcib4
>     ath0: <Atheros 9287> mem 0xfbef0000-0xfbefffff irq 18 at device
>     0.0 on pci4
>     usbus1: 5.0Gbps Super Speed USB v3.0
>     ugen1.1: <0x1033> at usbus1
>     uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
>     usbus1
>     ath0: AR9287 mac 384.2 RF5133 phy 15.15
>     ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
>     pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
>     pci5: <ACPI PCI bus> on pcib5
>     xhci1: <XHCI (generic) USB 3.0 controller> mem
>     0xfbff0000-0xfbffffff irq 19 at device 0.0 on pci5
>     xhci1: 32 byte context size.
>     usbus2 on xhci1
>     usbus2: 5.0Gbps Super Speed USB v3.0
>     ehci1: <Intel PCH USB 2.0 controller USB-A> mem
>     0xf9ff2000-0xf9ff23ff irq 23 at device 29.0 on pci0
>     usbus3: EHCI version 1.0
>     ugen2.1: <0x1b73> at usbus2
>     uhub2: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
>     usbus2
>     usbus3: <Intel PCH USB 2.0 controller USB-A> on ehci1
>     usbus3: 480Mbps High Speed USB v2.0
>     pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>     pci6: <ACPI PCI bus> on pcib6
>     isab0: <PCI-ISA bridge> at device 31.0 on pci0
>     isa0: <ISA bus> on isab0
>     atapci0: <Intel ATA controller> port
>     0xc080-0xc08f,0xc400-0xc40f,0xc480-0xc483,0xc800-0xc807,0xc880-0xc883,0xcc00-0xcc07
>     irq 19 at device 31.2 on pci0
>     ata2: <ATA channel 0> on atapci0
>     ugen3.1: <Intel> at usbus3
>     uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>     usbus3
>     disk scheduler: set policy of ad4 to noop
>     ad4: 953869MB <TOSHIBA MQ01ABD100 AX001A> at ata2-master UDMA33
>     ata3: <ATA channel 1> on atapci0
>     uhub2: 2 ports with 2 removable, self powered
>     pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x3b30) at device
>     31.3 irq 18
>     atapci1: <Intel ATA controller> port
>     0xb080-0xb08f,0xb400-0xb40f,0xb480-0xb483,0xb800-0xb807,0xb880-0xb883,0xbc00-0xbc07
>     irq 19 at device 31.5 on pci0
>     ata4: <ATA channel 0> on atapci1
>     uhub1: 4 ports with 4 removable, self powered
>     unknown: timeout waiting for read DRQ
>     unknown: timeout waiting for read DRQ
>     disk scheduler: set policy of acd0 to noop
>     acd0: DVDR <Slimtype DVD A DL8ATS/XAB2> at ata4-master UDMA33
>     ata5: <ATA channel 1> on atapci1
>     uhub3: 8 ports with 8 removable, self powered
>     acpi_button0: <Power Button> on acpi0
>     cpu0: <ACPI CPU> on acpi0
>     ACPI: Dynamic OEM Table Load:
>     ACPI: SSDT 0xFFFFFFE03FACB600 001028 (v01 DpgPmm P001Ist 00000011
>     INTL 20051117)
>     ACPI: Dynamic OEM Table Load:
>     ACPI: SSDT 0xFFFFFFE0B6167380 0004F4 (v01 PmRef  P001Cst 00003001
>     INTL 20051117)
>     cpu_cst0: <ACPI CPU C-State> on cpu0
>     cpu_pst0: <ACPI CPU P-State> on cpu0
>     clockmod0: <CPU clock modulation> on cpu0
>     coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>     cpu1: <ACPI CPU> on acpi0
>     cpu_cst1: <ACPI CPU C-State> on cpu1
>     cpu_pst1: <ACPI CPU P-State> on cpu1
>     clockmod1: <CPU clock modulation> on cpu1
>     coretemp1: <CPU On-Die Thermal Sensors> on cpu1
>     cpu2: <ACPI CPU> on acpi0
>     cpu_cst2: <ACPI CPU C-State> on cpu2
>     cpu_pst2: <ACPI CPU P-State> on cpu2
>     clockmod2: <CPU clock modulation> on cpu2
>     coretemp2: <CPU On-Die Thermal Sensors> on cpu2
>     cpu3: <ACPI CPU> on acpi0
>     cpu_cst3: <ACPI CPU C-State> on cpu3
>     cpu_pst3: <ACPI CPU P-State> on cpu3
>     clockmod3: <CPU clock modulation> on cpu3
>     coretemp3: <CPU On-Die Thermal Sensors> on cpu3
>     ACPI: Enabled 4 GPEs in block 00 to 3F
>     pmtimer0 on isa0
>     atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>     atkbd0: <AT Keyboard> irq 1 on atkbdc0
>     kbd0 at atkbd0
>     ugen3.2: <vendor 0x8087> at usbus3
>     uhub4: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
>     addr 2> on usbus3
>     vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
>     on isa0
>     sc0: <System console> at flags 0x100 on isa0
>     sc0: VGA <16 virtual consoles, flags=0x300>
>     lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
>     sio0: can't drain, serial port might not exist, disabling
>     sio1: can't drain, serial port might not exist, disabling
>     ppc0: cannot reserve I/O port range
>     hpt27xx: no controller detected.
>     CAM: Configuring 4 busses
>     CAM: finished configuring all busses
>     disk scheduler: set policy of cd0 to noop
>     cd0 at ata2 bus 0 target 0 lun 0
>     cd0: <Slimtype DVD A  DL8ATS XAB2> Removable CD-ROM SCSI-0 device
>     cd0: 33.000MB/s transfers
>     cd0: Attempt to query device size failed: NOT READY, Medium not
>     present - tray open
>     uhub4: 8 ports with 8 removable, self powered
>     intr 19 on cpu3 at 40001/40000 hz, livelocked limit engaged!
>     ugen3.3: <vendor 0x05e3> at usbus3
>     uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.64, addr
>     3> on usbus3
>     uhub0: 6 ports with 6 removable, self powered
>     uhub5: 4 ports with 4 removable, self powered
>     ugen0.2: <vendor 0x8087> at usbus0
>     uhub6: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
>     addr 2> on usbus0
>     ugen3.4: <vendor 0x05e3> at usbus3
>     uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.64, addr
>     4> on usbus3
>     uhub6: 6 ports with 6 removable, self powered
>     uhub7: 4 ports with 4 removable, self powered
>     ugen0.3: <Logitech> at usbus0
>     ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
>     on usbus0
>     kbd2 at ukbd0
>     ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
>     on usbus0
>     ums0: 16 buttons and [XYZT] coordinates ID=2
>     uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
>     on usbus0
>     ugen3.5: <vendor 0x05e3> at usbus3
>     uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr
>     5> on usbus3
>     uhub8: 4 ports with 4 removable, self powered
>     no B_DEVMAGIC (bootdev=0)
>     ugen3.6: <vendor 0x05e3> at usbus3
>     uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr
>     6> on usbus3
>     uhub9: 4 ports with 4 removable, self powered
>     ugen3.7: <HP> at usbus3
>     umass0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00, addr
>     7> on usbus3
>     disk scheduler: set policy of da8 to noop
>     da8 at umass-sim0 bus 0 target 0 lun 0
>     da8: <HP Photosmart B110 1.00> Removable Direct Access SCSI-5 device
>     da8: 40.000MB/s transfers
>     da8: Attempt to query device size failed: NOT READY, Medium not
>     present
>     Mounting root from hammer:serno/23BBPJN0T.s1d
>     HAMMER(ROOT) recovery check seqno=00233441
>     HAMMER(ROOT) recovery range 300000000a56b9d8-300000000a56b9d8
>     HAMMER(ROOT) recovery nexto 300000000a56b9d8 endseqno=00233442
>     HAMMER(ROOT) mounted clean, no recovery needed
>     DMA space used: 12416k, remaining available: 16384k
>     Mounting devfs
>     ugen3.8: <vendor 0x05e3> at usbus3
>     uhub10: <vendor 0x05e3 USB Hub 2.0, class 9/0, rev 2.00/7.02, addr
>     8> on usbus3
>     uhub10: 4 ports with 4 removable, self powered
>     ugen3.9: <Prolific Technology Inc.> at usbus3
>     ugen3.10: <Prolific Technology Inc.> at usbus3
>     ugen3.11: <Logitech> at usbus3
>     ums1: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/27.30,
>     addr 11> on usbus3
>     ums1: 8 buttons and [XYZT] coordinates ID=0
>     ugen3.12: <Darfon> at usbus3
>     ukbd1: <Darfon USB Combo Keyboard, class 0/0, rev 1.10/2.02, addr
>     12> on usbus3
>     kbd3 at ukbd1
>     uhid1: <Darfon USB Combo Keyboard, class 0/0, rev 1.10/2.02, addr
>     12> on usbus3
>     ulpt0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00, addr
>     7> on usbus3
>     ulpt0: using bi-directional mode
>     ucom init
>     uplcom0: <Prolific Technology Inc. USB-Serial Controller, class
>     0/0, rev 1.10/3.00, addr 10> on usbus3
>     attach tty
>     malloc:
>     uplcom1: <Prolific Technology Inc. USB-Serial Controller, class
>     0/0, rev 1.10/3.00, addr 9> on usbus3
>     attach tty
>     malloc:
>     ugen3.11: <Logitech> at usbus3 (disconnected)
>     ums1: at uhub4, port 4, addr 11 (disconnected)
>     ums1: detached
>     ugen3.12: <Darfon> at usbus3 (disconnected)
>     ukbd1: at uhub4, port 5, addr 12 (disconnected)
>     ukbd1: detached
>     uhid1: at uhub4, port 5, addr 12 (disconnected)
>     uhid1: detached
>
>     If someone can give me a pointer from what I have provided here
>     that would be great.
>     Thank you for making DragonFly!
>     Cheers,
>     George
>
>
>
>
> -- 
> Sincerely,
>
> Zachary Crownover

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20150309/79aac9b7/attachment-0002.htm>


More information about the Users mailing list