Lenovo Y510P test on latest Dfly amd64
bodie
bodzart at openbsd.cz
Wed May 21 09:37:26 PDT 2014
On 21.05.2014 10:02, bodie wrote:
> On 18.05.2014 06:59, bodie wrote:
>> On 16.05.2014 22:26, bodie wrote:
>>> Hi all,
>>>
>>> as stated in Subject I tried to boot latest amd64 Dfly, but not
>>> success. It doesn't go beyond initial boot screen with F1 option
>>> for
>>> boot of Dfly. No error, no boot, nothing, it's just repeating that
>>> menu on screen. Here at least some output from OpenBSD -current
>>> test
>>> http://marc.info/?l=openbsd-misc&m=140024527331873&w=2 . Is there a
>>> way how to test it? I can test it for devs to at least boot in live
>>> system and collect some outputs if I will get past boot menu.
>>
>> So got it running on newer snapshot. Questions remain the same as on
>> misc archive for OpenBSD. Regarding disk it will be most interesting
>> to know if there's a chance to get access to internal SSD part of
>> that
>> hybrid disk combo. Will be perfect candidate for use in swapcache
>> :-)
>> Any ideas regarding LAN (https://github.com/markjdb/alx-freebsd),
>> audio (can't see it in dmesg), but maybe loading module for azalia
>> is
>> enough then and is vga really supported?
>>
>> Thanks a lot
>>
>> Copyright (c) 2003-2014 The DragonFly Project.
>> Copyright (c) 1992-2003 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
>> 1994
>> The Regents of the University of California. All rights
>> reserved.
>> DragonFly v3.7.1.1195.gc9774-DEVELOPMENT #0: Sat May 17 12:59:14 UTC
>> 2014
>>
>> root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
>> TSC invariant clock: 2194969312 Hz, i8254 clock: 1193210 Hz
>> CPU: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (2194.93-MHz K8-class
>> CPU)
>> Origin = "GenuineIntel" Id = 0x306c3 Stepping = 3
>>
>>
>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>
>>
>> Features2=0x77dafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
>> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>> AMD Features2=0x21<LAHF,ABM>
>> Structured Extended
>>
>> Features=0x27ab<GSFSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID>
>> Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
>> MONITOR/MWAIT Features=0x3<CST,INTBRK>
>> real memory = 17092170752 (16300 MB)
>> avail memory = 16080101376 (15335 MB)
>> lapic: divisor index 0, frequency 49884692 Hz
>> Initialize MI interrupts
>> TSC testing MP synchronization ...
>> TSC is MP synchronized
>> TSC: cputimer freq 68591587, shift 5
>> FQ scheduler policy version 1.1 loaded
>> wdog: In-kernel automatic watchdog reset enabled
>> kbd1 at kbdmux0
>> disk scheduler: set policy of md0 to noop
>> md0: Malloc disk
>> ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
>> ACPI: XSDT 0x000000008CFFE210 0000A4 (v01 LENOVO CB-01 00000001
>> 01000013)
>> ACPI: FACP 0x000000008CFF7000 00010C (v05 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: DSDT 0x000000008CFE7000 00C690 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: FACS 0x000000008CFBA000 000040
>> ACPI: SLIC 0x000000008CFFD000 000176 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: UEFI 0x000000008CFFC000 000236 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: FPDT 0x000000008CFFA000 000044 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: MSDM 0x000000008CFF9000 000055 (v03 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: ASF! 0x000000008CFF8000 0000A5 (v32 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: HPET 0x000000008CFF6000 000038 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: APIC 0x000000008CFF5000 00008C (v03 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: MCFG 0x000000008CFF4000 00003C (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: SSDT 0x000000008CFE6000 000838 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: BOOT 0x000000008CFE4000 000028 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: ASPT 0x000000008CFE2000 000034 (v07 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: DBGP 0x000000008CFE1000 000034 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: SSDT 0x000000008CFD9000 000539 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: SSDT 0x000000008CFD8000 000AD8 (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> ACPI: SSDT 0x000000008CFD4000 00326E (v01 LENOVO CB-01 00000001
>> ACPI 00040000)
>> cryptosoft0: <software crypto> on motherboard
>> aesni0: <AES-CBC,AES-XTS> on motherboard
>> padlock0: No ACE support.
>> rdrand0: <RdRand RNG> on motherboard
>> acpi0: <LENOVO CB-01> on motherboard
>> ACPI: All ACPI Tables successfully acquired
>> ACPI FADT: SCI testing interrupt mode ...
>> ACPI FADT: SCI select level/high
>> ACPI: Executed 1 blocks of module-level executable AML code
>> objcache_reclaimlist
>> objcache_reclaimlist
>> objcache_reclaimlist
>> objcache_reclaimlist
>> acpi0: Power Button (fixed)
>> Warning: ACPI is disabling APM's device. You can't run both
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on
>> acpi0
>> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
>> on acpi0
>> acpi_hpet0: frequency 14318180
>> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> vgapci0: <VGA-compatible display> port 0x4000-0x403f mem
>> 0x90000000-0x9fffffff,0xa0000000-0xa03fffff irq 16 at device 2.0 on
>> pci0
>> agp0: <Haswell mobile GT2 IG> on vgapci0
>> agp0: aperture size is 256M, detected 32764k stolen memory
>> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x0c0c) at device 3.0
>> irq 16
>> pci0: <serial bus, USB> (vendor 0x8086, dev 0x8c31) at device 20.0
>> irq 16
>> pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq
>> 16
>> ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem
>> 0xa061d000-0xa061d3ff irq 16 at device 26.0 on pci0
>> usbus0: waiting for BIOS to give up control
>> usbus0: EHCI version 1.0
>> usbus0: <Intel Lynx Point USB 2.0 controller USB-B> on ehci0
>> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0
>> irq 22
>> pcib1: <ACPI PCI-PCI bridge> irq 19 at device 28.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> pci1: <network, ethernet> (vendor 0x1969, dev 0x10a1) at device 0.0
>> irq 19
>> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>> pci2: <ACPI PCI bus> on pcib2
>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xa0400000-0xa0401fff irq
>> 16 at device 0.0 on pci2
>> usbus0: 480Mbps High Speed USB v2.0
>> ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem
>> 0xa061c000-0xa061c3ff irq 23 at device 29.0 on pci0
>> usbus1: waiting for BIOS to give up control
>> ugen0.1: <Intel> at usbus0
>> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>> usbus0
>> usbus1: EHCI version 1.0
>> usbus1: <Intel Lynx Point USB 2.0 controller USB-A> on ehci1
>> usbus1: 480Mbps High Speed USB v2.0
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> ahci0: <AHCI-PCI-SATA> port
>>
>> 0x4060-0x407f,0x4090-0x4093,0x4080-0x4087,0x4094-0x4097,0x4088-0x408f
>> mem 0xa061b000-0xa061b7ff irq 19 at device 31.2 on pci0
>> ugen1.1: <Intel> at usbus1
>> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>> usbus1
>> uhub0: 2 ports with 2 removable, self powered
>> uhub1: 2 ports with 2 removable, self powered
>> ugen0.2: <vendor 0x8087> at usbus0
>> uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr
>> 2> on usbus0
>> ahci0: Intel hocus pocus
>> ahci0: AHCI 1.3 cap
>> 0xc730ff43<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<BOH>, 4
>> ports, 32 tags/port, gen 3 (6Gbps)
>> ahci0.5: Caps 6<POD,SUD>
>> ugen1.2: <vendor 0x8087> at usbus1
>> uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr
>> 2> on usbus1
>> uhub2: 6 ports with 6 removable, self powered
>> uhub3: 8 ports with 8 removable, self powered
>> ugen0.3: <vendor 0x8087> at usbus0
>> ugen1.3: <Generic> at usbus1
>> ugen1.4: <Kingston> at usbus1
>> umass0: <Kingston DT 101 II, class 0/0, rev 2.00/2.00, addr 4> on
>> usbus1
>> ugen1.5: <Razer> at usbus1
>> ums0: <Razer Razer Abyssus, class 0/0, rev 2.00/1.00, addr 5> on
>> usbus1
>> ums0: 7 buttons and [XYZ] coordinates ID=0
>> ahci0.5: Found DISK "ST1000LM014-1EJ164 LVD3" serial="W380PGFM"
>> ahci0.5: tags=32/32 satacap=8f0e satacap2=0006 satafea=004c NCQ=YES
>> capacity=953869.71MB
>> ahci0.5: f85=3469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
>> pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3
>> irq 18
>> acpi_lid0: <Control Method Lid Switch> on acpi0
>> acpi_tz0: <Thermal Zone> on acpi0
>> acpi_button0: <Power Button> on acpi0
>> acpi_button1: <Sleep Button> on acpi0
>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> psm0: model Generic PS/2 mouse, device ID 0
>> battery0: <ACPI Control Method Battery> on acpi0
>> acpi_acad0: <AC Adapter> on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> ACPI: Dynamic OEM Table Load:
>> ACPI: SSDT 0xFFFFFFE1F0E22C00 0003D3 (v01 PmRef Cpu0Cst 00003001
>> INTL 20130117)
>> cpu_cst0: <ACPI CPU C-State> on cpu0
>> cpu_pst0: <ACPI CPU P-State> on cpu0
>> clockmod0: <CPU clock modulation> on cpu0
>> perfbias0: <CPU perf-energy bias> on cpu0
>> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>> cpu1: <ACPI CPU> on acpi0
>> ACPI: Dynamic OEM Table Load:
>> ACPI: SSDT 0xFFFFFFE1EF715080 0005AA (v01 PmRef ApIst 00003000
>> INTL 20130117)
>> ACPI: Dynamic OEM Table Load:
>> ACPI: SSDT 0xFFFFFFE0379F96C0 000119 (v01 PmRef ApCst 00003000
>> INTL 20130117)
>> cpu_cst1: <ACPI CPU C-State> on cpu1
>> cpu_pst1: <ACPI CPU P-State> on cpu1
>> clockmod1: <CPU clock modulation> on cpu1
>> perfbias1: <CPU perf-energy bias> on cpu1
>> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
>> cpu2: <ACPI CPU> on acpi0
>> cpu_cst2: <ACPI CPU C-State> on cpu2
>> cpu_pst2: <ACPI CPU P-State> on cpu2
>> clockmod2: <CPU clock modulation> on cpu2
>> perfbias2: <CPU perf-energy bias> on cpu2
>> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
>> cpu3: <ACPI CPU> on acpi0
>> cpu_cst3: <ACPI CPU C-State> on cpu3
>> cpu_pst3: <ACPI CPU P-State> on cpu3
>> clockmod3: <CPU clock modulation> on cpu3
>> perfbias3: <CPU perf-energy bias> on cpu3
>> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
>> cpu4: <ACPI CPU> on acpi0
>> cpu_cst4: <ACPI CPU C-State> on cpu4
>> cpu_pst4: <ACPI CPU P-State> on cpu4
>> clockmod4: <CPU clock modulation> on cpu4
>> perfbias4: <CPU perf-energy bias> on cpu4
>> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
>> cpu5: <ACPI CPU> on acpi0
>> cpu_cst5: <ACPI CPU C-State> on cpu5
>> cpu_pst5: <ACPI CPU P-State> on cpu5
>> clockmod5: <CPU clock modulation> on cpu5
>> perfbias5: <CPU perf-energy bias> on cpu5
>> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
>> cpu6: <ACPI CPU> on acpi0
>> cpu_cst6: <ACPI CPU C-State> on cpu6
>> cpu_pst6: <ACPI CPU P-State> on cpu6
>> clockmod6: <CPU clock modulation> on cpu6
>> perfbias6: <CPU perf-energy bias> on cpu6
>> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
>> cpu7: <ACPI CPU> on acpi0
>> cpu_cst7: <ACPI CPU C-State> on cpu7
>> cpu_pst7: <ACPI CPU P-State> on cpu7
>> clockmod7: <CPU clock modulation> on cpu7
>> perfbias7: <CPU perf-energy bias> on cpu7
>> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
>> ACPI: Enabled 7 GPEs in block 00 to 3F
>> orm0: <Option ROM> at iomem 0xcf000-0xcffff on isa0
>> pmtimer0 on isa0
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
>> isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> wbsio1: <Winbond LPC Super I/O W83687THF rev 0x86> at port 0x4e-0x4f
>> on isa0
>> wbsio1: hardware monitor iobase is 0x0
>> wbsio1: no hardware monitor configured
>> sio0: can't drain, serial port might not exist, disabling
>> sio1: can't drain, serial port might not exist, disabling
>> ppc0: cannot reserve I/O port range
>> hpt27xx: no controller detected.
>> CAM: Configuring 2 busses
>> CAM: finished configuring all busses
>> disk scheduler: set policy of da8 to noop
>> disk scheduler: set policy of da0 to noop
>> da8 at umass-sim0 bus 0 target 0 lun 0
>> da8: <Kingston DT 101 II 1.00> Removable Direct Access SCSI-2 device
>> da8: Serial Number 000FEAFD4177A91187020046
>> da8: 40.000MB/s transfers
>> da8: 3832MB (7847936 512 byte sectors: 255H 63S/T 488C)
>> da0 at ahci0 bus 5 target 0 lun 0
>> da0: <SATA ST1000LM014-1EJ1 LVD3> Fixed Direct Access SCSI-4 device
>> da0: Serial Number W380PGFM
>> da0: 600.000MB/s transfers
>> da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>> no B_DEVMAGIC (bootdev=0)
>> Mounting root from hammer:serno/000FEAFD4177A91187020046.s1d
>> HAMMER(ROOT) recovery check seqno=00109b35
>> HAMMER(ROOT) recovery range 30000000018ad9f8-30000000018ad9f8
>> HAMMER(ROOT) recovery nexto 30000000018ad9f8 endseqno=00109b36
>> HAMMER(ROOT) mounted clean, no recovery needed
>> DMA space used: 10164k, remaining available: 16384k
>> Mounting devfs
>
>
> So wireless doesn't work properly. All modules related to iwn and
> iwnfw loaded during boot and then here
>
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html
> in 30.3.4.1.1 after trying to scan for APs I get "Fatal trap 9:
> general protection fault while in kernel mode"" coming from
> ieee80211_ioctl() (sorry don't have more details). It's on latest
> amd64 snapshot.
Update on snapshot from 21.5.
WiFi is working at least on my home WiFi. That corporate one will test
tomorrow morning. Except of that:
1) ums0: <Razer Razer Abyssus, class 0/0, rev 2.00/1.00, addr 5> on
usbus1
ums0: 7 buttons and [XYZ] coordinates ID=0
that mouse stop working in <1 minute in X everytime I start X. Have two
InputDevices in xorg.conf, one for /dev/sysmouse and one for /dev/ums0
and both work, after a while only touchpad on sysmouse is working, same
if I enable only ums0
2) X works in VESA - no Intel/KSM for Intel HD4600?
More information about the Users
mailing list