Lenovo Y510P test on latest Dfly amd64

bodie bodzart at openbsd.cz
Wed May 21 01:02:35 PDT 2014



On 18.05.2014 06:59, bodie wrote:
> On 16.05.2014 22:26, bodie wrote:
>> Hi all,
>>
>> as stated in Subject I tried to boot latest amd64 Dfly, but not
>> success. It doesn't go beyond initial boot screen with F1 option for
>> boot of Dfly. No error, no boot, nothing, it's just repeating that
>> menu on screen. Here at least some output from OpenBSD -current test
>> http://marc.info/?l=openbsd-misc&m=140024527331873&w=2 . Is there a
>> way how to test it? I can test it for devs to at least boot in live
>> system and collect some outputs if I will get past boot menu.
>
> So got it running on newer snapshot. Questions remain the same as on
> misc archive for OpenBSD. Regarding disk it will be most interesting
> to know if there's a chance to get access to internal SSD part of 
> that
> hybrid disk combo. Will be perfect candidate for use in swapcache :-)
> Any ideas regarding LAN (https://github.com/markjdb/alx-freebsd),
> audio (can't see it in dmesg), but maybe loading module for azalia is
> enough then and is vga really supported?
>
> Thanks a lot
>
> Copyright (c) 2003-2014 The DragonFly Project.
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
> 1994
>         The Regents of the University of California. All rights 
> reserved.
> DragonFly v3.7.1.1195.gc9774-DEVELOPMENT #0: Sat May 17 12:59:14 UTC 
> 2014
>     
> root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
> TSC invariant clock: 2194969312 Hz, i8254 clock: 1193210 Hz
> CPU: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (2194.93-MHz K8-class 
> CPU)
>   Origin = "GenuineIntel"  Id = 0x306c3  Stepping = 3
>
> 
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> 
> Features2=0x77dafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
>   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>   AMD Features2=0x21<LAHF,ABM>
>   Structured Extended
> Features=0x27ab<GSFSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID>
>   Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
>   MONITOR/MWAIT Features=0x3<CST,INTBRK>
> real memory  = 17092170752 (16300 MB)
> avail memory = 16080101376 (15335 MB)
> lapic: divisor index 0, frequency 49884692 Hz
> Initialize MI interrupts
> TSC testing MP synchronization ...
> TSC is MP synchronized
> TSC: cputimer freq 68591587, shift 5
> FQ scheduler policy version 1.1 loaded
> wdog: In-kernel automatic watchdog reset enabled
> kbd1 at kbdmux0
> disk scheduler: set policy of md0 to noop
> md0: Malloc disk
> ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
> ACPI: XSDT 0x000000008CFFE210 0000A4 (v01 LENOVO CB-01    00000001
>  01000013)
> ACPI: FACP 0x000000008CFF7000 00010C (v05 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: DSDT 0x000000008CFE7000 00C690 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: FACS 0x000000008CFBA000 000040
> ACPI: SLIC 0x000000008CFFD000 000176 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: UEFI 0x000000008CFFC000 000236 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: FPDT 0x000000008CFFA000 000044 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: MSDM 0x000000008CFF9000 000055 (v03 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: ASF! 0x000000008CFF8000 0000A5 (v32 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: HPET 0x000000008CFF6000 000038 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: APIC 0x000000008CFF5000 00008C (v03 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: MCFG 0x000000008CFF4000 00003C (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: SSDT 0x000000008CFE6000 000838 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: BOOT 0x000000008CFE4000 000028 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: ASPT 0x000000008CFE2000 000034 (v07 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: DBGP 0x000000008CFE1000 000034 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: SSDT 0x000000008CFD9000 000539 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: SSDT 0x000000008CFD8000 000AD8 (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> ACPI: SSDT 0x000000008CFD4000 00326E (v01 LENOVO CB-01    00000001
> ACPI 00040000)
> cryptosoft0: <software crypto> on motherboard
> aesni0: <AES-CBC,AES-XTS> on motherboard
> padlock0: No ACE support.
> rdrand0: <RdRand RNG> on motherboard
> acpi0: <LENOVO CB-01> on motherboard
> ACPI: All ACPI Tables successfully acquired
> ACPI FADT: SCI testing interrupt mode ...
> ACPI FADT: SCI select level/high
> ACPI: Executed 1 blocks of module-level executable AML code
> objcache_reclaimlist
> objcache_reclaimlist
> objcache_reclaimlist
> objcache_reclaimlist
> acpi0: Power Button (fixed)
> Warning: ACPI is disabling APM's device.  You can't run both
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on 
> acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff 
> on acpi0
> acpi_hpet0: frequency 14318180
> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> vgapci0: <VGA-compatible display> port 0x4000-0x403f mem
> 0x90000000-0x9fffffff,0xa0000000-0xa03fffff irq 16 at device 2.0 on
> pci0
> agp0: <Haswell mobile GT2 IG> on vgapci0
> agp0: aperture size is 256M, detected 32764k stolen memory
> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x0c0c) at device 3.0 irq 
> 16
> pci0: <serial bus, USB> (vendor 0x8086, dev 0x8c31) at device 20.0 
> irq 16
> pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 
> 16
> ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem
> 0xa061d000-0xa061d3ff irq 16 at device 26.0 on pci0
> usbus0: waiting for BIOS to give up control
> usbus0: EHCI version 1.0
> usbus0: <Intel Lynx Point USB 2.0 controller USB-B> on ehci0
> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0 
> irq 22
> pcib1: <ACPI PCI-PCI bridge> irq 19 at device 28.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <network, ethernet> (vendor 0x1969, dev 0x10a1) at device 0.0 
> irq 19
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci2: <ACPI PCI bus> on pcib2
> iwn0: <Intel Centrino Wireless-N 2230> mem 0xa0400000-0xa0401fff irq
> 16 at device 0.0 on pci2
> usbus0: 480Mbps High Speed USB v2.0
> ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem
> 0xa061c000-0xa061c3ff irq 23 at device 29.0 on pci0
> usbus1: waiting for BIOS to give up control
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
> usbus0
> usbus1: EHCI version 1.0
> usbus1: <Intel Lynx Point USB 2.0 controller USB-A> on ehci1
> usbus1: 480Mbps High Speed USB v2.0
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <AHCI-PCI-SATA> port
> 0x4060-0x407f,0x4090-0x4093,0x4080-0x4087,0x4094-0x4097,0x4088-0x408f
> mem 0xa061b000-0xa061b7ff irq 19 at device 31.2 on pci0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
> usbus1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> ugen0.2: <vendor 0x8087> at usbus0
> uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr
> 2> on usbus0
> ahci0: Intel hocus pocus
> ahci0: AHCI 1.3 cap
> 0xc730ff43<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<BOH>, 4
> ports, 32 tags/port, gen 3 (6Gbps)
> ahci0.5: Caps 6<POD,SUD>
> ugen1.2: <vendor 0x8087> at usbus1
> uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr
> 2> on usbus1
> uhub2: 6 ports with 6 removable, self powered
> uhub3: 8 ports with 8 removable, self powered
> ugen0.3: <vendor 0x8087> at usbus0
> ugen1.3: <Generic> at usbus1
> ugen1.4: <Kingston> at usbus1
> umass0: <Kingston DT 101 II, class 0/0, rev 2.00/2.00, addr 4> on 
> usbus1
> ugen1.5: <Razer> at usbus1
> ums0: <Razer Razer Abyssus, class 0/0, rev 2.00/1.00, addr 5> on 
> usbus1
> ums0: 7 buttons and [XYZ] coordinates ID=0
> ahci0.5: Found DISK "ST1000LM014-1EJ164 LVD3" serial="W380PGFM"
> ahci0.5: tags=32/32 satacap=8f0e satacap2=0006 satafea=004c NCQ=YES
> capacity=953869.71MB
> ahci0.5: f85=3469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
> pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3 
> irq 18
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> cpu0: <ACPI CPU> on acpi0
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0xFFFFFFE1F0E22C00 0003D3 (v01 PmRef  Cpu0Cst  00003001
> INTL 20130117)
> cpu_cst0: <ACPI CPU C-State> on cpu0
> cpu_pst0: <ACPI CPU P-State> on cpu0
> clockmod0: <CPU clock modulation> on cpu0
> perfbias0: <CPU perf-energy bias> on cpu0
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> cpu1: <ACPI CPU> on acpi0
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0xFFFFFFE1EF715080 0005AA (v01 PmRef  ApIst    00003000
> INTL 20130117)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0xFFFFFFE0379F96C0 000119 (v01 PmRef  ApCst    00003000
> INTL 20130117)
> cpu_cst1: <ACPI CPU C-State> on cpu1
> cpu_pst1: <ACPI CPU P-State> on cpu1
> clockmod1: <CPU clock modulation> on cpu1
> perfbias1: <CPU perf-energy bias> on cpu1
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> cpu2: <ACPI CPU> on acpi0
> cpu_cst2: <ACPI CPU C-State> on cpu2
> cpu_pst2: <ACPI CPU P-State> on cpu2
> clockmod2: <CPU clock modulation> on cpu2
> perfbias2: <CPU perf-energy bias> on cpu2
> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
> cpu3: <ACPI CPU> on acpi0
> cpu_cst3: <ACPI CPU C-State> on cpu3
> cpu_pst3: <ACPI CPU P-State> on cpu3
> clockmod3: <CPU clock modulation> on cpu3
> perfbias3: <CPU perf-energy bias> on cpu3
> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
> cpu4: <ACPI CPU> on acpi0
> cpu_cst4: <ACPI CPU C-State> on cpu4
> cpu_pst4: <ACPI CPU P-State> on cpu4
> clockmod4: <CPU clock modulation> on cpu4
> perfbias4: <CPU perf-energy bias> on cpu4
> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
> cpu5: <ACPI CPU> on acpi0
> cpu_cst5: <ACPI CPU C-State> on cpu5
> cpu_pst5: <ACPI CPU P-State> on cpu5
> clockmod5: <CPU clock modulation> on cpu5
> perfbias5: <CPU perf-energy bias> on cpu5
> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
> cpu6: <ACPI CPU> on acpi0
> cpu_cst6: <ACPI CPU C-State> on cpu6
> cpu_pst6: <ACPI CPU P-State> on cpu6
> clockmod6: <CPU clock modulation> on cpu6
> perfbias6: <CPU perf-energy bias> on cpu6
> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
> cpu7: <ACPI CPU> on acpi0
> cpu_cst7: <ACPI CPU C-State> on cpu7
> cpu_pst7: <ACPI CPU P-State> on cpu7
> clockmod7: <CPU clock modulation> on cpu7
> perfbias7: <CPU perf-energy bias> on cpu7
> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
> ACPI: Enabled 7 GPEs in block 00 to 3F
> orm0: <Option ROM> at iomem 0xcf000-0xcffff on isa0
> pmtimer0 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> wbsio1: <Winbond LPC Super I/O W83687THF rev 0x86> at port 0x4e-0x4f 
> on isa0
> wbsio1: hardware monitor iobase is 0x0
> wbsio1: no hardware monitor configured
> sio0: can't drain, serial port might not exist, disabling
> sio1: can't drain, serial port might not exist, disabling
> ppc0: cannot reserve I/O port range
> hpt27xx: no controller detected.
> CAM: Configuring 2 busses
> CAM: finished configuring all busses
> disk scheduler: set policy of da8 to noop
> disk scheduler: set policy of da0 to noop
> da8 at umass-sim0 bus 0 target 0 lun 0
> da8: <Kingston DT 101 II 1.00> Removable Direct Access SCSI-2 device
> da8: Serial Number 000FEAFD4177A91187020046
> da8: 40.000MB/s transfers
> da8: 3832MB (7847936 512 byte sectors: 255H 63S/T 488C)
> da0 at ahci0 bus 5 target 0 lun 0
> da0: <SATA ST1000LM014-1EJ1 LVD3> Fixed Direct Access SCSI-4 device
> da0: Serial Number W380PGFM
> da0: 600.000MB/s transfers
> da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> no B_DEVMAGIC (bootdev=0)
> Mounting root from hammer:serno/000FEAFD4177A91187020046.s1d
> HAMMER(ROOT) recovery check seqno=00109b35
> HAMMER(ROOT) recovery range 30000000018ad9f8-30000000018ad9f8
> HAMMER(ROOT) recovery nexto 30000000018ad9f8 endseqno=00109b36
> HAMMER(ROOT) mounted clean, no recovery needed
> DMA space used: 10164k, remaining available: 16384k
> Mounting devfs


So wireless doesn't work properly. All modules related to iwn and iwnfw 
loaded during boot and then here 
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html 
in 30.3.4.1.1 after trying to scan for APs I get "Fatal trap 9: general 
protection fault while in kernel mode"" coming from ieee80211_ioctl() 
(sorry don't have more details). It's on latest amd64 snapshot.



More information about the Users mailing list