UHCI Kernel Panic on Acer Travelmate 290

Tomaž Borštnar tomaz.borstnar at over.net
Sun Jan 9 02:07:45 PST 2005


Tomaž Borštnar wrote:

Attached is dmesg output and pciconf -lv.

Script started on Sun Jan  9 11:39:17 2005
You have mail.
192# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Fri Jan  7 13:19:41 GMT 2005
    root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1398795526 Hz, i8254 clock: 1193168 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 520028160 (507840K bytes)
avail memory = 494759936 (483164K bytes)
Preloaded elf kernel "/kernel" at 0xc0667000.
Preloaded elf module "/modules/acpi.ko" at 0xc0667210.
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Fri Jan  7 13:19:41 GMT 2005
    root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1398797864 Hz, i8254 clock: 1193170 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 520028160 (507840K bytes)
avail memory = 495108096 (483504K bytes)
Preloaded elf kernel "/kernel" at 0xc0612000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fe890
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x3584) at 0.1
pci0: <unknown card> (vendor=0x8086, dev=0x3585) at 0.3
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xe000-0xe007 mem 0xf0000000-0xf007ffff,0xb0000000-0xb7ffffff irq 11 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <unknown card> (vendor=0x8086, dev=0x3582) at 2.1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1200-0x121f at device 29.0 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1600-0x161f at device 29.1 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1700-0x171f at device 29.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <USB controller> at 29.7 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fwohci0: <VIA Fire II (VT6306)> port 0xc100-0xc17f mem 0xe0001800-0xe0001fff irq 11 at device 0.0 on pci1
installed MI handler for int 11
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:41:44:00:79:df
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:00:79:df
fwe0: MAC address: 02:02:3f:00:79:df
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe0001000-0xe00010ff irq 11 at device 1.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:02:3f:12:d9:7b
pci1: <unknown card> (vendor=0x8086, dev=0x4220) at 2.0 irq 11
cbb0: <PCI-CardBus Bridge> at device 4.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: Hi!
pcib1: routed slot 4 INTA to irq 6
installed MI handler for int 6
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0x1100-0x110f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 5
orm0: <Option ROMs> at iomem 0xe0000-0xe17ff,0xe6000-0xe6fff on isa0
fdc0: cannot reserve interrupt line
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: 38154MB <TOSHIBA MK4025GAS> [77520/16/63] at ata0-master UDMA33
acd0: CD-RW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI CDRW/DVD SBW-242 UX08> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [119008 x 2048 byte records]
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
Waiting (max 60 seconds) for system thread syncer to stop...stopped

syncing disks... 
done
Uptime: 6h35m28s
kthread 0xc97b3c20 cbb0 has exited
Rebooting...
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Sun Jan  9 11:11:57 CET 2005
    root at xxxxxxxxxxxxxxx:/usr/obj/usr/src-stable/sys/ZVEZEK
TSC clock: 1398794280 Hz, i8254 clock: 1193167 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 520028160 (507840K bytes)
avail memory = 494690304 (483096K bytes)
Preloaded elf kernel "/kernel" at 0xc0678000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fe890
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x3584) at 0.1
pci0: <unknown card> (vendor=0x8086, dev=0x3585) at 0.3
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xe000-0xe007 mem 0xf0000000-0xf007ffff,0xb0000000-0xb7ffffff irq 11 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <unknown card> (vendor=0x8086, dev=0x3582) at 2.1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1200-0x121f at device 29.0 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1600-0x161f at device 29.1 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1700-0x171f at device 29.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <USB controller> at 29.7 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fwohci0: <VIA Fire II (VT6306)> port 0xc100-0xc17f mem 0xe0001800-0xe0001fff irq 11 at device 0.0 on pci1
installed MI handler for int 11
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:41:44:00:79:df
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:00:79:df
fwe0: MAC address: 02:02:3f:00:79:df
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe0001000-0xe00010ff irq 11 at device 1.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:02:3f:12:d9:7b
pci1: <unknown card> (vendor=0x8086, dev=0x4220) at 2.0 irq 11
cbb0: <PCI-CardBus Bridge> at device 4.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: Hi!
pcib1: routed slot 4 INTA to irq 6
installed MI handler for int 6
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0x1100-0x110f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3
pcm0: <Intel ICH4 (82801DB)> port 0xe200-0xe23f,0xe100-0xe1ff mem 0xf0080600-0xf00806ff,0xf0080400-0xf00805ff irq 5 at device 31.5 on pci0
installed MI handler for int 5
pcm0: <Avance Logic ALC202 AC97 Codec>
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 5
orm0: <Option ROMs> at iomem 0xe0000-0xe17ff,0xe6000-0xe6fff on isa0
fdc0: cannot reserve interrupt line
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: 38154MB <TOSHIBA MK4025GAS> [77520/16/63] at ata0-master UDMA33
acd0: CD-RW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI CDRW/DVD SBW-242 UX08> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [119008 x 2048 byte records]
192# pciconf -lv
hostb0 at pci0:0:0:	class=0x060000 card=0x003d1025 chip=0x35808086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '852GM Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
none0 at pci0:0:1:	class=0x088000 card=0x003d1025 chip=0x35848086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '852GM System Memory Controller'
    class    = base peripheral
none1 at pci0:0:3:	class=0x088000 card=0x003d1025 chip=0x35858086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '852GM Configuration Process'
    class    = base peripheral
agp0 at pci0:2:0:	class=0x030000 card=0x003d1025 chip=0x35828086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '852GM Integrated Graphics Device'
    class    = display
    subclass = VGA
none2 at pci0:2:1:	class=0x038000 card=0x003d1025 chip=0x35828086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '852GM Integrated Graphics Device'
    class    = display
none3 at pci0:29:0:	class=0x0c0300 card=0x003d1025 chip=0x24c28086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB UHCI Controller #1'
    class    = serial bus
    subclass = USB
none4 at pci0:29:1:	class=0x0c0300 card=0x003d1025 chip=0x24c48086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB UHCI Controller #2'
    class    = serial bus
    subclass = USB
none5 at pci0:29:2:	class=0x0c0300 card=0x003d1025 chip=0x24c78086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB UHCI Controller #3'
    class    = serial bus
    subclass = USB
none6 at pci0:29:7:	class=0x0c0320 card=0x003d1025 chip=0x24cd8086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB EHCI Controller'
    class    = serial bus
    subclass = USB
pcib1 at pci0:30:0:	class=0x060400 card=0x00000000 chip=0x24488086 rev=0x83 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM (ICH2/3) PCI to I/O Hub Bridge (2448)'
    class    = bridge
    subclass = PCI-PCI
isab0 at pci0:31:0:	class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:31:1:	class=0x01018a card=0x003d1025 chip=0x24ca8086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM IDE Controller (UltraATA/100)'
    class    = mass storage
    subclass = ATA
none7 at pci0:31:3:	class=0x0c0500 card=0x003d1025 chip=0x24c38086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcm0 at pci0:31:5:	class=0x040100 card=0x00211025 chip=0x24c58086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
none8 at pci0:31:6:	class=0x070300 card=0x003d1025 chip=0x24c68086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) AC'97 Modem Controller'
    class    = simple comms
    subclass = generic modem
fwohci0 at pci1:0:0:	class=0x0c0010 card=0x003d1025 chip=0x30441106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
    class    = serial bus
    subclass = FireWire
rl0 at pci1:1:0:	class=0x020000 card=0x003d1025 chip=0x813910ec rev=0x10 hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
    class    = network
    subclass = ethernet
none9 at pci1:2:0:	class=0x028000 card=0x27018086 chip=0x42208086 rev=0x05 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = network
cbb0 at pci1:4:0:	class=0x060700 card=0x003d1025 chip=0x14101524 rev=0x01 hdr=0x02
    vendor   = 'ENE Technology Inc'
    class    = bridge
    subclass = PCI-CardBus
192# exit
exit

Script done on Sun Jan  9 11:39:28 2005




More information about the Users mailing list