(boot -v) Re: strangeness on geode/alix board (www.pcengines.ch , alix.1b)

Andrew Atrens atrens at nortel.com
Mon Jul 23 20:32:28 PDT 2007


Here's a boot -v with GENERIC kernel, ACPI disabled ...

as you can see 'nata' doesn't find any disks .. old 'ata' does but I think it's the
old isa compatibility code kicking in ..


OK show
LINES=24
autoboot_delay=NO
bootfile=kernel
currdev=disk0s4a:
hint.acpi.0.oem=AMDGX3
hint.acpi.0.revision=1
hint.acpi.0.rsdt=0x0f7b3040
interpret=OK
kernel=kernel
kernel_options=
kernelname=/kernel
loaddev=disk0s4a:
mac_ifoff=NO
module_path=/;/boot;/modules
prompt=${interpret}
OK boot -v
SMAP type=01 base=00000000 00000000 len=00000000 0009e800
SMAP type=02 base=00000000 0009e800 len=00000000 00001800
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 0f6b0000
SMAP type=04 base=00000000 0f7b0000 len=00000000 00003000
SMAP type=03 base=00000000 0f7b3000 len=00000000 0000d000
SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.9.0-DEVELOPMENT #2: Mon Jul 23 23:17:36 EDT 2007
    atrens at ab-thinky:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 497981712 Hz, i8254 clock: 1193017 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x5a2  Stepping = 2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 16 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
L1 instruction cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
L2 internal cache: 128 kbytes, 32 bytes/line, 1 lines/tag, 4-way associative
Write Allocate Disable
real memory  = 259719168 (253632K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x00722000 - 0x0f79ffff, 252174336 bytes (61566 pages)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
avail memory = 240754688 (235112K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa650
bios32: Entry = 0xfaac0 (c00faac0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xaaf0
pnpbios: Found PnP BIOS data at 0xc00fb3d0
pnpbios: Entry = f0000:b400  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc06f5000.
crypto: <crypto core>
wlan: <802.11 Link Layer>
K6-family MTRR support enabled (2 registers)
md search: name = /kernel type = elf kernel
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80186800
pci_open(2):    mode 2 enable port (0x0cf8) is 0xff
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: error reporting broken; using 387 emulator
npx0: <math processor> [attached!] on motherboard
isa0.nexus0.root0
isa0: <ISA bus> [tentative] on motherboard
isa0: <ISA bus> [attached!] on motherboard
ex_isa_identify()
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.nexus0.root0
orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xc7fff,0xef000-0xeffff on isa0
orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xc7fff,0xef000-0xeffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc0.isa0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: ENABLE_DEV return code:00fa
psm: DISABLE_DEV return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 02 64
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SET_RESOLUTION (0) 00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 00 64
psm: DISABLE_DEV return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (0) 00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 00 64
psm: SET_RESOLUTION (3) 00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 03 64
psm: SET_RESOLUTION (3) 00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 03 64
psm: SET_SCALING11 return code:00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (3) 00fa
psm: SET_RESOLUTION (2) 00fa
psm: SET_RESOLUTION (1) 00fa
psm: SET_RESOLUTION (3) 00fa
psm: SET_RESOLUTION (1) 00fa
psm: SET_RESOLUTION (2) 00fa
psm: SET_RESOLUTION (3) 00fa
psm: SEND_AUX_DEV_DATA return code:00fa
psm: data 08 00 00
psm: SET_SAMPLING_RATE (200) 00fa
psm: SET_SAMPLING_RATE (200) 00fa
psm: SET_SAMPLING_RATE (80) 00fa
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SET_SAMPLING_RATE (200) 00fa
psm: SET_SAMPLING_RATE (100) 00fa
psm: SET_SAMPLING_RATE (80) 00fa
psm: SET_SAMPLING_RATE (60) 00fa
psm: SET_SAMPLING_RATE (40) 00fa
psm: SET_SAMPLING_RATE (20) 00fa
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SET_SAMPLING_RATE (200) 00fa
psm: SET_SAMPLING_RATE (100) 00fa
psm: SET_SAMPLING_RATE (80) 00fa
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SET_SAMPLING_RATE (100) 00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_SCALING21 return code:00fa
psm: SET_SCALING21 return code:00fa
psm: SET_SCALING21 return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 10 00 64
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SET_SAMPLING_RATE (10) 00fa
psm: SEND_DEV_ID return code:00fa
psm: device ID: 0000
psm: SET_RESOLUTION (2) 00fa
psm: SET_SAMPLING_RATE (100) 00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SET_SCALING11 return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 02 64
psm: SET_RESOLUTION (2) 00fa
psm: SET_SAMPLING_RATE (100) 00fa
psm: SET_SCALING11 return code:00fa
psm: SEND_AUX_DEV_DATA return code:00fa
psm: data 08 00 00
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 02 64
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (0) 00fa
psm: SET_RESOLUTION (1) 00fa
psm0.atkbdc0.isa0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 02 03 00 02 67 5f 4f 50 82 51 9e
bf 1f 00 4f 0e 0f 00 00 07 80 9b 8d 8f 28 1f 97
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 66 5f 4f 50 82 51 9e
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 0f 97
b9 a3 ff 00 08 08 08 08 08 08 08 10 18 18 18 18
18 18 18 0e 00 0f 08 00 00 00 00 00 10 0a 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 02 03 00 02 67 5f 4f 50 82 51 9e
bf 1f 00 4f 0e 0f 00 00 07 80 9b 8d 8f 28 1f 97
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0.isa0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0.isa0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1.isa0.nexus0.root0
sio1 [tentative] at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1 [attached!] at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0.isa0.nexus0.root0
ppc0: <Parallel port> [tentative] at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0.ppc0.isa0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0.ppc0.isa0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.isa0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.isa0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0: <Parallel port> [attached!] at port 0x378-0x37f irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03f31f3f 0..1011=1012 cylinders, 0..31=32 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
faith0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
bootdev: a0500000 type=0 unit=0 slice=5 part=0 major=3
ATA PseudoRAID loaded
Mounting root from ufs:/dev/ad0s0a
no such device 'ad'
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6







More information about the Bugs mailing list