problems starting Xorg

Martin Ivanov marto1980 at gmail.com
Fri Apr 19 04:00:24 PDT 2024


As I am not sure the attachment is readable, I am posting here the most
important trailing part of it:

[  7493.651] (II) intel(0): EDID for output DP-1
[  7493.661] (II) intel(0): EDID for output HDMI-1
[  7493.661] (II) intel(0): EDID for output DP-2
[  7493.661] (II) intel(0): Output eDP-1 connected
[  7493.661] (II) intel(0): Output DP-1 disconnected
[  7493.661] (II) intel(0): Output HDMI-1 disconnected
[  7493.661] (II) intel(0): Output DP-2 disconnected
[  7493.661] (II) intel(0): Using exact sizes for initial modes
[  7493.661] (II) intel(0): Output eDP-1 using initial mode 1920x1080 +0+0
[  7493.661] (II) intel(0): Kernel page flipping support detected, enabling
[  7493.661] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[  7493.661] (==) intel(0): DPI set to (96, 96)
[  7493.661] (II) Loading sub module "fb"
[  7493.661] (II) LoadModule: "fb"
[  7493.661] (II) Module "fb" already built-in
[  7493.661] (II) Loading sub module "dri2"
[  7493.661] (II) LoadModule: "dri2"
[  7493.661] (II) Module "dri2" already built-in
[  7495.681] (EE) intel(G0): [drm] failed to set drm interface version:
Unknown error: -13 [-13].
[  7495.681] (EE) intel(G0): Failed to become DRM master.
[  7495.681] (EE) Segmentation fault at address 0x20
[  7495.681] (EE)
Fatal server error:
[  7495.681] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  7495.681] (EE)
[  7495.681] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
 for help.
[  7495.681] (EE) Please also check the log file at "/var/log/Xorg.1.log"
for additional information.
[  7495.681] (EE)
[  7495.691] (EE) Server terminated with error (1). Closing log file.

On Fri, Apr 19, 2024 at 12:53 PM Martin Ivanov <marto1980 at gmail.com> wrote:

> Hello, I just installed DragonFly version 6.4.However, I have problems
> starting the X server. The respective log file Xorg.1.log is attached. I
> have an Intel graphics card with an Nvidia on top. More than 3 years ago I
> had no problems starting X with that hardware, but now there are problems.
>
> Any suggestions will be appreciated.
>
> Thank you very much in advance.
>
> Best regards,
> Martin
>
> Here follow some more details on my hardware:
>
> bash-5.0# lspci
> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core
> Processor Host Bridge/DRAM Registers (rev 05)
> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen
> Core Processor PCIe Controller (x16) (rev 05)
> 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev
> 04)
> 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200
> v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)
> 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset
> Family USB 3.0 xHCI Controller (rev 31)
> 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230
> Series Chipset Family Thermal Subsystem (rev 31)
> 00:15.0 Signal processing controller: Intel Corporation 100 Series/C230
> Series Chipset Family Serial IO I2C Controller #0 (rev 31)
>
>
> 00:15.1 Signal processing controller: Intel Corporation 100 Series/C230
> Series Chipset Family Serial IO I2C Controller #1 (rev 31)
>
>
> 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series
> Chipset Family MEI Controller #1 (rev 31)
>
>
> 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset
> Family PCI Express Root Port #1 (rev f1)
>
>
> 00:1c.2 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset
> Family PCI Express Root Port #3 (rev f1)
>
>
> 00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset
> Family PCI Express Root Port #5 (rev f1)
>
>
> 00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset
> Family PCI Express Root Port #9 (rev f1)
>
>
> 00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller
> (rev 31)
>
>
> 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series
> Chipset Family Power Management Controller (rev 31)
>
>
> 00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
>
>
>
> 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family
> SMBus (rev 31)
>
>
> 01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile]
> (rev a1)
>
>
> 02:00.0 Unassigned class [ff00]: Alcor Micro AU6621 PCI-E Flash card
> reader controller
>
>
> 03:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev
> 78)
>
>
> 6f:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe
> SSD Controller SM961/PM961
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20240419/66fe211f/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.1.log
Type: text/x-log
Size: 18764 bytes
Desc: not available
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20240419/66fe211f/attachment-0001.bin>


More information about the Users mailing list