no X on a machine with onboard video
karu.pruun
karu.pruun at gmail.com
Fri Nov 19 06:55:02 PST 2021
Hello
When you boot to console, can you 'kldload radeon' and see if it
works? If yes, then drm/radeon load fine.
Next, set up a basic /etc/X11/xorg.conf where the driver section has
either radeon with no accel
---
Section "Device"
Option "NoAccel" "true"
Identifier "Card0"
Driver "radeon"
BusID "PCI:9:0:0" # <-- INSERT CORRECT BUSID HERE
EndSection
---
and start xorg. If this does not work, use the modesetting driver:
---
Section "Device"
Identifier "Card0"
Driver "modesetting"
BusID "PCI:9:0:0" # <-- INSERT CORRECT BUSID HERE
EndSection
---
Best
Peeter
--
On Fri, Nov 19, 2021 at 4:37 PM Antonio Olivares
<olivares14031 at gmail.com> wrote:
>
> On Thu, Nov 18, 2021 at 11:55 PM Antonio Olivares
> <olivares14031 at gmail.com> wrote:
> >
> > Dear kind DragonflyBSD users,
> >
> > I have managed to install DragonflyBSD 6.0.1 on an old machine with
> > integrated video on the motherboard.
> >
> > The machine was running Dragonfly 5.2, but I wanted to upgrade it to
> > latest. This has resulted in having no X.
> >
> > the information from pciconf -lv
> > returns:
> >
> > vgapci0 at pci0:1:5:0
> > vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
> > device = 'RS740 [Radeon 2100]'
> > class = display
> > subclass = VGA
> >
> >
> > The monitor am Acer Monitor which it is connected to supports 1600x900
> > output as follows:
> >
> > Screen 0: minimum 320 x 200, current 1600 x 900, maximum 16384 x 16384
> > DisplayPort-0 disconnected primary (normal left inverted right x axis y axis)
> > HDMI-0 disconnected (normal left inverted right x axis y axis)
> > DVI-0 connected 1600x900+0+0 (normal left inverted right x axis y
> > axis) 443mm x 249mm
> > 1600x900 60.00*+
> > 1280x800 59.91
> > 1152x864 75.00
> > 1280x720 60.00
> > 1024x768 75.03 70.07 60.00
> > 832x624 74.55
> > 800x600 72.19 75.00 60.32 56.25
> > 640x480 75.00 72.81 66.67 59.94
> > 720x400 70.08
> >
> > I have installed xfce and when I type startx I get a blank screen, and
> > pressing CTRL+ALT+BACKSPACE does nothing(maybe depracated),
> > I have to reset machine or turn off holding power button. Any
> > suggestions as to how to get this working are appreciated.
> >
> > Best Regards,
> >
> >
> > Antonio
>
> From a linux live cd, and where X works I can send the following:
>
> [root@ ~]# lspci
> 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI]
> RS690/RS740 Host Bridge
> 00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690/RS740
> PCI to PCI Bridge (Internal gfx)
> 00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI
> to PCI Bridge (PCI Express Port 2)
> 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
> 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
> 00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
> USB OHCI1 Controller
> 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB EHCI Controller
> 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
> 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
> USB OHCI1 Controller
> 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB EHCI Controller
> 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
> Controller (rev 3a)
> 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 IDE Controller
> 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
> Azalia (Intel HDA)
> 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 LPC host controller
> 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI
> to PCI Bridge
> 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
> 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
> Processor HyperTransport Configuration
> 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
> Processor Address Map
> 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
> Processor DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
> Processor Miscellaneous Control
> 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
> Processor Link Control
> 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc.
> [AMD/ATI] RS740 [Radeon 2100]
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
> [root@ ~]#
> [root@ ~]# tail -f /var/log/Xorg.0.log
> [ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "libinput keyboard catchall"
> [ 104.336] (II) Using input driver 'libinput' for 'Microsoft
> Microsoft Optical Mouse with Tilt Wheel Consumer Control'
> [ 104.337] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: always reports core events
> [ 104.337] (**) Option "Device" "/dev/input/event7"
> [ 104.337] (**) Option "_source" "_driver/libinput"
> [ 104.337] (II) libinput: Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: is a virtual subdevice
> [ 104.337] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input10/event7"
> [ 104.337] (II) XINPUT: Adding extended input device "Microsoft
> Microsoft Optical Mouse with Tilt Wheel Consumer Control" (type:
> KEYBOARD, id 11)
> [ 104.337] (**) Option "xkb_layout" "us"
> [ 104.337] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
>
> [root@ ~]# cat /var/log/Xorg.0.log
> [ 103.854]
> X.Org X Server 1.20.11
> X Protocol Version 11, Revision 0
> [ 103.854] Build Operating System: Slackware 15.0 Slackware Linux Project
> [ 103.854] Current Operating System: Linux austrumi.example.net
> 5.12.0 #1 SMP Mon Apr 26 15:15:14 EEST 2021 x86_64
> [ 103.854] Kernel command line: BOOT_IMAGE=/austrumi/bzImage
> initrd=/austrumi/initrd.gz rcutree.rcu_idle_gp_delay=1 dolivecd
> [ 103.854] Build Date: 13 April 2021 08:41:45PM
> [ 103.854]
> [ 103.854] Current version of pixman: 0.40.0
> [ 103.854] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 103.854] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 103.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 19
> 14:27:48 2021
> [ 103.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [ 103.855] (==) No Layout section. Using the first Screen section.
> [ 103.855] (==) No screen section available. Using defaults.
> [ 103.855] (**) |-->Screen "Default Screen Section" (0)
> [ 103.855] (**) | |-->Monitor "<default monitor>"
> [ 103.855] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 103.856] (==) Automatically adding devices
> [ 103.856] (==) Automatically enabling devices
> [ 103.856] (==) Automatically adding GPU devices
> [ 103.856] (==) Automatically binding GPU devices
> [ 103.856] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [ 103.856] (WW) The directory "/usr/share/fonts/local" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/Type1" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/CID" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
> [ 103.856] Entry deleted from font path.
> [ 103.856] (**) FontPath set to:
> /usr/share/fonts/misc,
> /usr/share/fonts/OTF,
> /usr/share/fonts/TTF,
> /usr/share/fonts/TTF,
> /usr/share/fonts/OTF,
> /usr/share/fonts/misc
> [ 103.856] (==) ModulePath set to "/usr/lib64/xorg/modules"
> [ 103.856] (WW) Ignoring unrecognized extension "XFree86-DGA"
> [ 103.856] (II) The server relies on udev to provide the list of
> input devices.
> If no devices become available, reconfigure udev or disable AutoAddDevices.
> [ 103.856] (II) Loader magic: 0x5b9c80
> [ 103.856] (II) Module ABI versions:
> [ 103.856] X.Org ANSI C Emulation: 0.4
> [ 103.856] X.Org Video Driver: 24.1
> [ 103.856] X.Org XInput driver : 24.1
> [ 103.856] X.Org Server Extension : 10.0
> [ 103.856] (II) xfree86: Adding drm device (/dev/dri/card0)
> [ 103.859] (--) PCI:*(1 at 0:5:0) 1002:796e:1458:d000 rev 0, Mem @
> 0xd8000000/134217728, 0xfdff0000/65536, 0xfde00000/1048576, I/O @
> 0x0000ee00/256, BIOS @ 0x????????/131072
> [ 103.859] (II) Open ACPI successful (/var/run/acpid.socket)
> [ 103.859] (II) LoadModule: "glx"
> [ 103.860] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
> [ 103.861] (II) Module glx: vendor="X.Org Foundation"
> [ 103.861] compiled for 1.20.11, module version = 1.0.0
> [ 103.861] ABI class: X.Org Server Extension, version 10.0
> [ 103.861] (II) Applying OutputClass "Radeon" to /dev/dri/card0
> [ 103.861] loading driver: radeon
> [ 103.861] (==) Matched radeon as autoconfigured driver 0
> [ 103.861] (==) Matched ati as autoconfigured driver 1
> [ 103.861] (==) Matched modesetting as autoconfigured driver 2
> [ 103.861] (==) Matched fbdev as autoconfigured driver 3
> [ 103.861] (==) Matched vesa as autoconfigured driver 4
> [ 103.861] (==) Assigned the driver to the xf86ConfigLayout
> [ 103.861] (II) LoadModule: "radeon"
> [ 103.861] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
> [ 103.862] (II) Module radeon: vendor="X.Org Foundation"
> [ 103.862] compiled for 1.20.11, module version = 19.1.0
> [ 103.862] Module class: X.Org Video Driver
> [ 103.862] ABI class: X.Org Video Driver, version 24.1
> [ 103.862] (II) LoadModule: "ati"
> [ 103.862] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
> [ 103.862] (II) Module ati: vendor="X.Org Foundation"
> [ 103.862] compiled for 1.20.11, module version = 19.1.0
> [ 103.862] Module class: X.Org Video Driver
> [ 103.862] ABI class: X.Org Video Driver, version 24.1
> [ 103.920] (II) LoadModule: "modesetting"
> [ 103.920] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
> [ 103.920] (II) Module modesetting: vendor="X.Org Foundation"
> [ 103.920] compiled for 1.20.11, module version = 1.20.11
> [ 103.920] Module class: X.Org Video Driver
> [ 103.920] ABI class: X.Org Video Driver, version 24.1
> [ 103.920] (II) LoadModule: "fbdev"
> [ 103.920] (WW) Warning, couldn't open module fbdev
> [ 103.920] (EE) Failed to load module "fbdev" (module does not exist, 0)
> [ 103.920] (II) LoadModule: "vesa"
> [ 103.920] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
> [ 103.920] (II) Module vesa: vendor="X.Org Foundation"
> [ 103.920] compiled for 1.20.11, module version = 2.5.0
> [ 103.920] Module class: X.Org Video Driver
> [ 103.920] ABI class: X.Org Video Driver, version 24.1
> [ 103.920] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
> ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
> ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
> ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
> ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
> ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
> ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
> ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
> ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
> ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
> ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
> ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
> ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
> ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
> ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
> ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
> ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
> ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
> ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
> ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
> ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
> ATI Radeon 9800PRO, ATI Radeon 9800XT,
> ATI Radeon Mobility 9600/9700 (M10/M11),
> ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
> ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
> ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
> ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
> ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
> ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
> ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
> ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
> ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
> ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
> ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
> ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
> ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
> ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
> ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
> ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
> ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
> ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
> ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
> ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
> ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
> ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
> ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
> ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
> ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
> ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
> ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
> ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
> ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
> ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
> ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
> ATI FireGL V3350, ATI Mobility Radeon X1450,
> ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
> ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
> ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
> ATI FireGL V3400, ATI Mobility FireGL V5250,
> ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
> ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
> ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
> ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
> ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
> ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
> ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
> ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
> ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
> ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
> ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
> ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
> AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
> ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
> ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
> ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
> ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
> ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
> ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
> ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
> ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
> ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
> ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
> ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
> ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
> ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
> ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
> ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
> ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
> ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
> ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
> ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
> ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
> ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
> ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
> ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
> ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
> ATI FireGL V3600, ATI Radeon HD 2600 LE,
> ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
> ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
> ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
> ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
> ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
> ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
> ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
> ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
> ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
> AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
> AMD Radeon HD 6300 Series Graphics,
> AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
> ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
> AMD Firestream 9350, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
> ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
> REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
> ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
> AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
> AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
> ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
> MULLINS, KAVERI, HAWAII
> [ 103.921] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> [ 103.921] (II) VESA: driver for VESA chipsets: vesa
> [ 103.921] (++) using VT number 4
>
> [ 103.921] (II) [KMS] Kernel modesetting enabled.
> [ 103.922] (WW) Falling back to old probe method for modesetting
> [ 103.922] (II) RADEON(0): Creating default Display subsection in
> Screen section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 103.922] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
> [ 103.922] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes
> (32 bpp pixmaps)
> [ 103.922] (==) RADEON(0): Default visual is TrueColor
> [ 103.922] (==) RADEON(0): RGB weight 888
> [ 103.922] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> [ 103.922] (--) RADEON(0): Chipset: "ATI RS740" (ChipID = 0x796e)
> [ 103.922] (II) Loading sub module "fb"
> [ 103.922] (II) LoadModule: "fb"
> [ 103.922] (II) Loading /usr/lib64/xorg/modules/libfb.so
> [ 103.922] (II) Module fb: vendor="X.Org Foundation"
> [ 103.922] compiled for 1.20.11, module version = 1.0.0
> [ 103.922] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 103.922] (II) Loading sub module "dri2"
> [ 103.922] (II) LoadModule: "dri2"
> [ 103.922] (II) Module "dri2" already built-in
> [ 103.922] (II) Loading sub module "exa"
> [ 103.922] (II) LoadModule: "exa"
> [ 103.922] (II) Loading /usr/lib64/xorg/modules/libexa.so
> [ 103.922] (II) Module exa: vendor="X.Org Foundation"
> [ 103.922] compiled for 1.20.11, module version = 2.6.0
> [ 103.922] ABI class: X.Org Video Driver, version 24.1
> [ 103.922] (II) RADEON(0): KMS Color Tiling: enabled
> [ 103.922] (II) RADEON(0): KMS Color Tiling 2D: disabled
> [ 103.922] (==) RADEON(0): TearFree property default: auto
> [ 103.922] (II) RADEON(0): KMS Pageflipping: enabled
> [ 103.922] (II) RADEON(0): SwapBuffers wait for vsync: enabled
> [ 103.993] (II) RADEON(0): Output VGA-0 has no monitor section
> [ 104.023] (II) RADEON(0): Output DVI-0 has no monitor section
> [ 104.094] (II) RADEON(0): EDID for output VGA-0
> [ 104.124] (II) RADEON(0): EDID for output DVI-0
> [ 104.124] (II) RADEON(0): Manufacturer: ACR Model: 1a5 Serial#: 287344540
> [ 104.124] (II) RADEON(0): Year: 2011 Week: 12
> [ 104.124] (II) RADEON(0): EDID Version: 1.3
> [ 104.124] (II) RADEON(0): Digital Display Input
> [ 104.124] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
> [ 104.124] (II) RADEON(0): Gamma: 2.20
> [ 104.124] (II) RADEON(0): DPMS capabilities: Off
> [ 104.124] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> [ 104.124] (II) RADEON(0): First detailed timing is preferred mode
> [ 104.124] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300
> greenY: 0.600
> [ 104.124] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312
> whiteY: 0.329
> [ 104.124] (II) RADEON(0): Supported established timings:
> [ 104.124] (II) RADEON(0): 720x400 at 70Hz
> [ 104.124] (II) RADEON(0): 640x480 at 60Hz
> [ 104.124] (II) RADEON(0): 640x480 at 67Hz
> [ 104.124] (II) RADEON(0): 640x480 at 72Hz
> [ 104.124] (II) RADEON(0): 640x480 at 75Hz
> [ 104.124] (II) RADEON(0): 800x600 at 56Hz
> [ 104.124] (II) RADEON(0): 800x600 at 60Hz
> [ 104.124] (II) RADEON(0): 800x600 at 72Hz
> [ 104.124] (II) RADEON(0): 800x600 at 75Hz
> [ 104.124] (II) RADEON(0): 832x624 at 75Hz
> [ 104.124] (II) RADEON(0): 1024x768 at 60Hz
> [ 104.124] (II) RADEON(0): 1024x768 at 70Hz
> [ 104.124] (II) RADEON(0): 1024x768 at 75Hz
> [ 104.124] (II) RADEON(0): 1152x864 at 75Hz
> [ 104.124] (II) RADEON(0): Manufacturer's mask: 0
> [ 104.124] (II) RADEON(0): Supported standard timings:
> [ 104.124] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
> [ 104.124] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
> [ 104.124] (II) RADEON(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
> [ 104.124] (II) RADEON(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
> [ 104.124] (II) RADEON(0): Supported detailed timing:
> [ 104.124] (II) RADEON(0): clock: 108.0 MHz Image Size: 443 x 249 mm
> [ 104.124] (II) RADEON(0): h_active: 1600 h_sync: 1624 h_sync_end
> 1704 h_blank_end 1800 h_border: 0
> [ 104.124] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end
> 904 v_blanking: 1000 v_border: 0
> [ 104.124] (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 30
> H max: 80 kHz, PixClock max 165 MHz
> [ 104.124] (II) RADEON(0): Serial No: LNY080034201
> [ 104.124] (II) RADEON(0): Monitor name: Acer S201HL
> [ 104.124] (II) RADEON(0): EDID (in hex):
> [ 104.124] (II) RADEON(0): 00ffffffffffff000472a5019c872011
> [ 104.124] (II) RADEON(0): 0c150103802c19782aee91a3544c9926
> [ 104.124] (II) RADEON(0): 0f5054bfee80714f81c08100a9c00101
> [ 104.124] (II) RADEON(0): 010101010101302a40c8608464301850
> [ 104.124] (II) RADEON(0): 1300bbf91000001e000000fd00324c1e
> [ 104.124] (II) RADEON(0): 5010000a202020202020000000ff004c
> [ 104.124] (II) RADEON(0): 4e593038303033343230310a000000fc
> [ 104.124] (II) RADEON(0): 00416365722053323031484c0a2000c3
> [ 104.124] (II) RADEON(0): Printing probed modes for output DVI-0
> [ 104.124] (II) RADEON(0): Modeline "1600x900"x60.0 108.00 1600
> 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
> [ 104.124] (II) RADEON(0): Modeline "1280x800"x59.9 71.00 1280
> 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
> [ 104.124] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152
> 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280
> 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024
> 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024
> 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024
> 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864
> 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856
> 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816
> 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840
> 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824
> 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656
> 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664
> 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704
> 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656
> 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
> [ 104.125] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738
> 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
> [ 104.125] (II) RADEON(0): Output VGA-0 disconnected
> [ 104.125] (II) RADEON(0): Output DVI-0 connected
> [ 104.125] (II) RADEON(0): Using exact sizes for initial modes
> [ 104.125] (II) RADEON(0): Output DVI-0 using initial mode 1600x900 +0+0
> [ 104.125] (II) RADEON(0): mem size init: gart size :1fdff000 vram
> size: s:8000000 visible:7a41000
> [ 104.125] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
> [ 104.125] (==) RADEON(0): DPI set to (96, 96)
> [ 104.125] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 104.125] (II) Loading sub module "ramdac"
> [ 104.125] (II) LoadModule: "ramdac"
> [ 104.125] (II) Module "ramdac" already built-in
> [ 104.125] (II) UnloadModule: "modesetting"
> [ 104.125] (II) Unloading modesetting
> [ 104.125] (II) UnloadModule: "vesa"
> [ 104.125] (II) Unloading vesa
> [ 104.125] (II) RADEON(0): [DRI2] Setup complete
> [ 104.125] (II) RADEON(0): [DRI2] DRI driver: r300
> [ 104.125] (II) RADEON(0): [DRI2] VDPAU driver: r300
> [ 104.125] (II) RADEON(0): Front buffer size: 5625K
> [ 104.125] (II) RADEON(0): VRAM usage limit set to 107577K
> [ 104.125] (==) RADEON(0): DRI3 disabled
> [ 104.125] (==) RADEON(0): Backing store enabled
> [ 104.126] (II) RADEON(0): Direct rendering enabled
> [ 104.126] (II) RADEON(0): Render acceleration enabled for
> R300/R400/R500 type cards.
> [ 104.126] (II) EXA(0): Driver allocated offscreen pixmaps
> [ 104.126] (II) EXA(0): Driver registered support for the following
> operations:
> [ 104.126] (II) Solid
> [ 104.126] (II) Copy
> [ 104.126] (II) Composite (RENDER acceleration)
> [ 104.126] (II) UploadToScreen
> [ 104.126] (II) DownloadFromScreen
> [ 104.126] (II) RADEON(0): Acceleration enabled
> [ 104.126] (==) RADEON(0): DPMS enabled
> [ 104.126] (==) RADEON(0): Silken mouse enabled
> [ 104.126] (II) RADEON(0): Set up textured video
> [ 104.126] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
> [ 104.126] (II) RADEON(0): [XvMC] Extension initialized.
> [ 104.126] (II) Initializing extension Generic Event Extension
> [ 104.126] (II) Initializing extension SHAPE
> [ 104.126] (II) Initializing extension MIT-SHM
> [ 104.126] (II) Initializing extension XInputExtension
> [ 104.126] (II) Initializing extension XTEST
> [ 104.126] (II) Initializing extension BIG-REQUESTS
> [ 104.126] (II) Initializing extension SYNC
> [ 104.126] (II) Initializing extension XKEYBOARD
> [ 104.127] (II) Initializing extension XC-MISC
> [ 104.127] (II) Initializing extension XFIXES
> [ 104.127] (II) Initializing extension RENDER
> [ 104.127] (II) Initializing extension RANDR
> [ 104.127] (II) Initializing extension COMPOSITE
> [ 104.127] (II) Initializing extension DAMAGE
> [ 104.127] (II) Initializing extension MIT-SCREEN-SAVER
> [ 104.127] (II) Initializing extension DOUBLE-BUFFER
> [ 104.127] (II) Initializing extension RECORD
> [ 104.127] (II) Initializing extension DPMS
> [ 104.127] (II) Initializing extension Present
> [ 104.127] (II) Initializing extension DRI3
> [ 104.127] (II) Initializing extension X-Resource
> [ 104.127] (II) Initializing extension XVideo
> [ 104.127] (II) Initializing extension XVideo-MotionCompensation
> [ 104.127] (II) Initializing extension GLX
> [ 104.180] (II) AIGLX: Loaded and initialized r300
> [ 104.180] (II) GLX: Initialized DRI2 GL provider for screen 0
> [ 104.180] (II) Initializing extension XFree86-VidModeExtension
> [ 104.180] (II) Initializing extension XFree86-DGA
> [ 104.180] (II) Initializing extension XFree86-DRI
> [ 104.180] (II) Initializing extension DRI2
> [ 104.180] (II) RADEON(0): Setting screen physical size to 423 x 238
> [ 104.234] (II) config/udev: Adding input device Power Button
> (/dev/input/event1)
> [ 104.234] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 104.234] (**) Power Button: Applying InputClass "libinput keyboard catchall"
> [ 104.234] (**) Power Button: Applying InputClass "keyboard-all"
> [ 104.234] (**) Power Button: Applying InputClass "libinput keyboard catchall"
> [ 104.234] (II) LoadModule: "libinput"
> [ 104.234] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
> [ 104.234] (II) Module libinput: vendor="X.Org Foundation"
> [ 104.234] compiled for 1.20.11, module version = 1.0.0
> [ 104.235] Module class: X.Org XInput Driver
> [ 104.235] ABI class: X.Org XInput driver, version 24.1
> [ 104.235] (II) Using input driver 'libinput' for 'Power Button'
> [ 104.235] (**) Power Button: always reports core events
> [ 104.235] (**) Option "Device" "/dev/input/event1"
> [ 104.235] (**) Option "_source" "server/udev"
> [ 104.237] (II) event1 - Power Button: is tagged by udev as: Keyboard
> [ 104.237] (II) event1 - Power Button: device is a keyboard
> [ 104.237] (II) event1 - Power Button: device removed
> [ 104.241] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
> [ 104.241] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD, id 6)
> [ 104.241] (**) Option "xkb_layout" "us"
> [ 104.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
> [ 104.278] (II) event1 - Power Button: is tagged by udev as: Keyboard
> [ 104.278] (II) event1 - Power Button: device is a keyboard
> [ 104.279] (II) config/udev: Adding input device Power Button
> (/dev/input/event0)
> [ 104.279] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 104.279] (**) Power Button: Applying InputClass "libinput keyboard catchall"
> [ 104.279] (**) Power Button: Applying InputClass "keyboard-all"
> [ 104.279] (**) Power Button: Applying InputClass "libinput keyboard catchall"
> [ 104.279] (II) Using input driver 'libinput' for 'Power Button'
> [ 104.279] (**) Power Button: always reports core events
> [ 104.279] (**) Option "Device" "/dev/input/event0"
> [ 104.279] (**) Option "_source" "server/udev"
> [ 104.280] (II) event0 - Power Button: is tagged by udev as: Keyboard
> [ 104.280] (II) event0 - Power Button: device is a keyboard
> [ 104.280] (II) event0 - Power Button: device removed
> [ 104.283] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
> [ 104.283] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD, id 7)
> [ 104.283] (**) Option "xkb_layout" "us"
> [ 104.283] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
> [ 104.284] (II) event0 - Power Button: is tagged by udev as: Keyboard
> [ 104.284] (II) event0 - Power Button: device is a keyboard
> [ 104.285] (II) config/udev: Adding input device Dell Dell USB
> Keyboard (/dev/input/event6)
> [ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass "evdev
> keyboard catchall"
> [ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass
> "libinput keyboard catchall"
> [ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass "keyboard-all"
> [ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass
> "libinput keyboard catchall"
> [ 104.285] (II) Using input driver 'libinput' for 'Dell Dell USB Keyboard'
> [ 104.285] (**) Dell Dell USB Keyboard: always reports core events
> [ 104.285] (**) Option "Device" "/dev/input/event6"
> [ 104.285] (**) Option "_source" "server/udev"
> [ 104.286] (II) event6 - Dell Dell USB Keyboard: is tagged by udev
> as: Keyboard
> [ 104.286] (II) event6 - Dell Dell USB Keyboard: device is a keyboard
> [ 104.286] (II) event6 - Dell Dell USB Keyboard: device removed
> [ 104.294] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:413C:2003.0001/input/input9/event6"
> [ 104.294] (II) XINPUT: Adding extended input device "Dell Dell USB
> Keyboard" (type: KEYBOARD, id 8)
> [ 104.294] (**) Option "xkb_layout" "us"
> [ 104.294] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
> [ 104.295] (II) event6 - Dell Dell USB Keyboard: is tagged by udev
> as: Keyboard
> [ 104.295] (II) event6 - Dell Dell USB Keyboard: device is a keyboard
> [ 104.296] (II) config/udev: Adding input device Microsoft Microsoft
> Optical Mouse with Tilt Wheel Consumer Control (/dev/input/event7)
> [ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "evdev keyboard catchall"
> [ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "libinput keyboard catchall"
> [ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "keyboard-all"
> [ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "libinput keyboard catchall"
> [ 104.296] (II) Using input driver 'libinput' for 'Microsoft
> Microsoft Optical Mouse with Tilt Wheel Consumer Control'
> [ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: always reports core events
> [ 104.296] (**) Option "Device" "/dev/input/event7"
> [ 104.296] (**) Option "_source" "server/udev"
> [ 104.297] (II) event7 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: is tagged by udev as: Keyboard
> [ 104.297] (II) event7 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: device is a keyboard
> [ 104.297] (II) event7 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: device removed
> [ 104.310] (II) libinput: Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: needs a virtual subdevice
> [ 104.310] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input10/event7"
> [ 104.310] (II) XINPUT: Adding extended input device "Microsoft
> Microsoft Optical Mouse with Tilt Wheel Consumer Control" (type:
> MOUSE, id 9)
> [ 104.310] (**) Option "AccelerationScheme" "none"
> [ 104.310] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: (accel) selected scheme none/0
> [ 104.310] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: (accel) acceleration factor: 2.000
> [ 104.310] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: (accel) acceleration threshold: 4
> [ 104.311] (II) event7 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: is tagged by udev as: Keyboard
> [ 104.311] (II) event7 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: device is a keyboard
> [ 104.312] (II) config/udev: Adding input device Microsoft Microsoft
> Optical Mouse with Tilt Wheel Mouse (/dev/input/event8)
> [ 104.312] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Mouse: Applying InputClass "evdev pointer catchall"
> [ 104.312] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Mouse: Applying InputClass "libinput pointer catchall"
> [ 104.312] (II) Using input driver 'libinput' for 'Microsoft
> Microsoft Optical Mouse with Tilt Wheel Mouse'
> [ 104.312] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Mouse: always reports core events
> [ 104.312] (**) Option "Device" "/dev/input/event8"
> [ 104.312] (**) Option "_source" "server/udev"
> [ 104.313] (II) event8 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Mouse: is tagged by udev as: Mouse
> [ 104.313] (II) event8 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Mouse: device is a pointer
> [ 104.313] (II) event8 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Mouse: device removed
> [ 104.326] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input11/event8"
> [ 104.326] (II) XINPUT: Adding extended input device "Microsoft
> Microsoft Optical Mouse with Tilt Wheel Mouse" (type: MOUSE, id 10)
> [ 104.326] (**) Option "AccelerationScheme" "none"
> [ 104.326] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Mouse: (accel) selected scheme none/0
> [ 104.326] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Mouse: (accel) acceleration factor: 2.000
> [ 104.326] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Mouse: (accel) acceleration threshold: 4
> [ 104.327] (II) event8 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Mouse: is tagged by udev as: Mouse
> [ 104.327] (II) event8 - Microsoft Microsoft Optical Mouse with
> Tilt Wheel Mouse: device is a pointer
> [ 104.328] (II) config/udev: Adding input device Microsoft Microsoft
> Optical Mouse with Tilt Wheel Mouse (/dev/input/mouse0)
> [ 104.328] (II) No input driver specified, ignoring this device.
> [ 104.328] (II) This device may have been added with another device file.
> [ 104.328] (II) config/udev: Adding input device HDA ATI SB Rear Mic
> (/dev/input/event2)
> [ 104.329] (II) No input driver specified, ignoring this device.
> [ 104.329] (II) This device may have been added with another device file.
> [ 104.329] (II) config/udev: Adding input device HDA ATI SB Front
> Mic (/dev/input/event3)
> [ 104.329] (II) No input driver specified, ignoring this device.
> [ 104.329] (II) This device may have been added with another device file.
> [ 104.329] (II) config/udev: Adding input device HDA ATI SB Line
> (/dev/input/event4)
> [ 104.329] (II) No input driver specified, ignoring this device.
> [ 104.329] (II) This device may have been added with another device file.
> [ 104.330] (II) config/udev: Adding input device HDA ATI SB Line Out
> (/dev/input/event5)
> [ 104.330] (II) No input driver specified, ignoring this device.
> [ 104.330] (II) This device may have been added with another device file.
> [ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "evdev keyboard catchall"
> [ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "libinput keyboard catchall"
> [ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "keyboard-all"
> [ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: Applying InputClass "libinput keyboard catchall"
> [ 104.336] (II) Using input driver 'libinput' for 'Microsoft
> Microsoft Optical Mouse with Tilt Wheel Consumer Control'
> [ 104.337] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
> Consumer Control: always reports core events
> [ 104.337] (**) Option "Device" "/dev/input/event7"
> [ 104.337] (**) Option "_source" "_driver/libinput"
> [ 104.337] (II) libinput: Microsoft Microsoft Optical Mouse with
> Tilt Wheel Consumer Control: is a virtual subdevice
> [ 104.337] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input10/event7"
> [ 104.337] (II) XINPUT: Adding extended input device "Microsoft
> Microsoft Optical Mouse with Tilt Wheel Consumer Control" (type:
> KEYBOARD, id 11)
> [ 104.337] (**) Option "xkb_layout" "us"
> [ 104.337] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
> [root@ ~]#
>
> I have run
> # Xorg -configure
> and it yields a radeon
> driver but it does not work. Screen goes blank and CTRL+ALT+BACKSPACE
> does not work and I have to poweroff(by pressing and holding
> powerbutton) or hitting reset.
>
> I have already installed Xorg and Xfce but no X. How can I get X
> working on this machine?
>
> Thank you in advance for help and suggestions. I nuked 5.2
> installation to upgrade to 6.0.1, I tried upgrading from source, but
> machine just froze several times :(
>
> Best Regards,
>
>
> Antonio
More information about the Users
mailing list