no X on a machine with onboard video
Antonio Olivares
olivares14031 at gmail.com
Fri Nov 19 06:36:43 PST 2021
On Thu, Nov 18, 2021 at 11:55 PM Antonio Olivares
<olivares14031 at gmail.com> wrote:
>
> Dear kind DragonflyBSD users,
>
> I have managed to install DragonflyBSD 6.0.1 on an old machine with
> integrated video on the motherboard.
>
> The machine was running Dragonfly 5.2, but I wanted to upgrade it to
> latest. This has resulted in having no X.
>
> the information from pciconf -lv
> returns:
>
> vgapci0 at pci0:1:5:0
> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
> device = 'RS740 [Radeon 2100]'
> class = display
> subclass = VGA
>
>
> The monitor am Acer Monitor which it is connected to supports 1600x900
> output as follows:
>
> Screen 0: minimum 320 x 200, current 1600 x 900, maximum 16384 x 16384
> DisplayPort-0 disconnected primary (normal left inverted right x axis y axis)
> HDMI-0 disconnected (normal left inverted right x axis y axis)
> DVI-0 connected 1600x900+0+0 (normal left inverted right x axis y
> axis) 443mm x 249mm
> 1600x900 60.00*+
> 1280x800 59.91
> 1152x864 75.00
> 1280x720 60.00
> 1024x768 75.03 70.07 60.00
> 832x624 74.55
> 800x600 72.19 75.00 60.32 56.25
> 640x480 75.00 72.81 66.67 59.94
> 720x400 70.08
>
> I have installed xfce and when I type startx I get a blank screen, and
> pressing CTRL+ALT+BACKSPACE does nothing(maybe depracated),
> I have to reset machine or turn off holding power button. Any
> suggestions as to how to get this working are appreciated.
>
> Best Regards,
>
>
> Antonio
>From a linux live cd, and where X works I can send the following:
[root@ ~]# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI]
RS690/RS740 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690/RS740
PCI to PCI Bridge (Internal gfx)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI
to PCI Bridge (PCI Express Port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller (rev 3a)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI
to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Link Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] RS740 [Radeon 2100]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[root@ ~]#
[root@ ~]# tail -f /var/log/Xorg.0.log
[ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 104.336] (II) Using input driver 'libinput' for 'Microsoft
Microsoft Optical Mouse with Tilt Wheel Consumer Control'
[ 104.337] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: always reports core events
[ 104.337] (**) Option "Device" "/dev/input/event7"
[ 104.337] (**) Option "_source" "_driver/libinput"
[ 104.337] (II) libinput: Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: is a virtual subdevice
[ 104.337] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input10/event7"
[ 104.337] (II) XINPUT: Adding extended input device "Microsoft
Microsoft Optical Mouse with Tilt Wheel Consumer Control" (type:
KEYBOARD, id 11)
[ 104.337] (**) Option "xkb_layout" "us"
[ 104.337] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[root@ ~]# cat /var/log/Xorg.0.log
[ 103.854]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 103.854] Build Operating System: Slackware 15.0 Slackware Linux Project
[ 103.854] Current Operating System: Linux austrumi.example.net
5.12.0 #1 SMP Mon Apr 26 15:15:14 EEST 2021 x86_64
[ 103.854] Kernel command line: BOOT_IMAGE=/austrumi/bzImage
initrd=/austrumi/initrd.gz rcutree.rcu_idle_gp_delay=1 dolivecd
[ 103.854] Build Date: 13 April 2021 08:41:45PM
[ 103.854]
[ 103.854] Current version of pixman: 0.40.0
[ 103.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 103.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 103.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 19
14:27:48 2021
[ 103.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 103.855] (==) No Layout section. Using the first Screen section.
[ 103.855] (==) No screen section available. Using defaults.
[ 103.855] (**) |-->Screen "Default Screen Section" (0)
[ 103.855] (**) | |-->Monitor "<default monitor>"
[ 103.855] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 103.856] (==) Automatically adding devices
[ 103.856] (==) Automatically enabling devices
[ 103.856] (==) Automatically adding GPU devices
[ 103.856] (==) Automatically binding GPU devices
[ 103.856] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 103.856] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[ 103.856] Entry deleted from font path.
[ 103.856] (**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/OTF,
/usr/share/fonts/TTF,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/misc
[ 103.856] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 103.856] (WW) Ignoring unrecognized extension "XFree86-DGA"
[ 103.856] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 103.856] (II) Loader magic: 0x5b9c80
[ 103.856] (II) Module ABI versions:
[ 103.856] X.Org ANSI C Emulation: 0.4
[ 103.856] X.Org Video Driver: 24.1
[ 103.856] X.Org XInput driver : 24.1
[ 103.856] X.Org Server Extension : 10.0
[ 103.856] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 103.859] (--) PCI:*(1 at 0:5:0) 1002:796e:1458:d000 rev 0, Mem @
0xd8000000/134217728, 0xfdff0000/65536, 0xfde00000/1048576, I/O @
0x0000ee00/256, BIOS @ 0x????????/131072
[ 103.859] (II) Open ACPI successful (/var/run/acpid.socket)
[ 103.859] (II) LoadModule: "glx"
[ 103.860] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 103.861] (II) Module glx: vendor="X.Org Foundation"
[ 103.861] compiled for 1.20.11, module version = 1.0.0
[ 103.861] ABI class: X.Org Server Extension, version 10.0
[ 103.861] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[ 103.861] loading driver: radeon
[ 103.861] (==) Matched radeon as autoconfigured driver 0
[ 103.861] (==) Matched ati as autoconfigured driver 1
[ 103.861] (==) Matched modesetting as autoconfigured driver 2
[ 103.861] (==) Matched fbdev as autoconfigured driver 3
[ 103.861] (==) Matched vesa as autoconfigured driver 4
[ 103.861] (==) Assigned the driver to the xf86ConfigLayout
[ 103.861] (II) LoadModule: "radeon"
[ 103.861] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 103.862] (II) Module radeon: vendor="X.Org Foundation"
[ 103.862] compiled for 1.20.11, module version = 19.1.0
[ 103.862] Module class: X.Org Video Driver
[ 103.862] ABI class: X.Org Video Driver, version 24.1
[ 103.862] (II) LoadModule: "ati"
[ 103.862] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 103.862] (II) Module ati: vendor="X.Org Foundation"
[ 103.862] compiled for 1.20.11, module version = 19.1.0
[ 103.862] Module class: X.Org Video Driver
[ 103.862] ABI class: X.Org Video Driver, version 24.1
[ 103.920] (II) LoadModule: "modesetting"
[ 103.920] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 103.920] (II) Module modesetting: vendor="X.Org Foundation"
[ 103.920] compiled for 1.20.11, module version = 1.20.11
[ 103.920] Module class: X.Org Video Driver
[ 103.920] ABI class: X.Org Video Driver, version 24.1
[ 103.920] (II) LoadModule: "fbdev"
[ 103.920] (WW) Warning, couldn't open module fbdev
[ 103.920] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 103.920] (II) LoadModule: "vesa"
[ 103.920] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 103.920] (II) Module vesa: vendor="X.Org Foundation"
[ 103.920] compiled for 1.20.11, module version = 2.5.0
[ 103.920] Module class: X.Org Video Driver
[ 103.920] ABI class: X.Org Video Driver, version 24.1
[ 103.920] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 103.921] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 103.921] (II) VESA: driver for VESA chipsets: vesa
[ 103.921] (++) using VT number 4
[ 103.921] (II) [KMS] Kernel modesetting enabled.
[ 103.922] (WW) Falling back to old probe method for modesetting
[ 103.922] (II) RADEON(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 103.922] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 103.922] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes
(32 bpp pixmaps)
[ 103.922] (==) RADEON(0): Default visual is TrueColor
[ 103.922] (==) RADEON(0): RGB weight 888
[ 103.922] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 103.922] (--) RADEON(0): Chipset: "ATI RS740" (ChipID = 0x796e)
[ 103.922] (II) Loading sub module "fb"
[ 103.922] (II) LoadModule: "fb"
[ 103.922] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 103.922] (II) Module fb: vendor="X.Org Foundation"
[ 103.922] compiled for 1.20.11, module version = 1.0.0
[ 103.922] ABI class: X.Org ANSI C Emulation, version 0.4
[ 103.922] (II) Loading sub module "dri2"
[ 103.922] (II) LoadModule: "dri2"
[ 103.922] (II) Module "dri2" already built-in
[ 103.922] (II) Loading sub module "exa"
[ 103.922] (II) LoadModule: "exa"
[ 103.922] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 103.922] (II) Module exa: vendor="X.Org Foundation"
[ 103.922] compiled for 1.20.11, module version = 2.6.0
[ 103.922] ABI class: X.Org Video Driver, version 24.1
[ 103.922] (II) RADEON(0): KMS Color Tiling: enabled
[ 103.922] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 103.922] (==) RADEON(0): TearFree property default: auto
[ 103.922] (II) RADEON(0): KMS Pageflipping: enabled
[ 103.922] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 103.993] (II) RADEON(0): Output VGA-0 has no monitor section
[ 104.023] (II) RADEON(0): Output DVI-0 has no monitor section
[ 104.094] (II) RADEON(0): EDID for output VGA-0
[ 104.124] (II) RADEON(0): EDID for output DVI-0
[ 104.124] (II) RADEON(0): Manufacturer: ACR Model: 1a5 Serial#: 287344540
[ 104.124] (II) RADEON(0): Year: 2011 Week: 12
[ 104.124] (II) RADEON(0): EDID Version: 1.3
[ 104.124] (II) RADEON(0): Digital Display Input
[ 104.124] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 104.124] (II) RADEON(0): Gamma: 2.20
[ 104.124] (II) RADEON(0): DPMS capabilities: Off
[ 104.124] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 104.124] (II) RADEON(0): First detailed timing is preferred mode
[ 104.124] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 104.124] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312
whiteY: 0.329
[ 104.124] (II) RADEON(0): Supported established timings:
[ 104.124] (II) RADEON(0): 720x400 at 70Hz
[ 104.124] (II) RADEON(0): 640x480 at 60Hz
[ 104.124] (II) RADEON(0): 640x480 at 67Hz
[ 104.124] (II) RADEON(0): 640x480 at 72Hz
[ 104.124] (II) RADEON(0): 640x480 at 75Hz
[ 104.124] (II) RADEON(0): 800x600 at 56Hz
[ 104.124] (II) RADEON(0): 800x600 at 60Hz
[ 104.124] (II) RADEON(0): 800x600 at 72Hz
[ 104.124] (II) RADEON(0): 800x600 at 75Hz
[ 104.124] (II) RADEON(0): 832x624 at 75Hz
[ 104.124] (II) RADEON(0): 1024x768 at 60Hz
[ 104.124] (II) RADEON(0): 1024x768 at 70Hz
[ 104.124] (II) RADEON(0): 1024x768 at 75Hz
[ 104.124] (II) RADEON(0): 1152x864 at 75Hz
[ 104.124] (II) RADEON(0): Manufacturer's mask: 0
[ 104.124] (II) RADEON(0): Supported standard timings:
[ 104.124] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 104.124] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 104.124] (II) RADEON(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 104.124] (II) RADEON(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 104.124] (II) RADEON(0): Supported detailed timing:
[ 104.124] (II) RADEON(0): clock: 108.0 MHz Image Size: 443 x 249 mm
[ 104.124] (II) RADEON(0): h_active: 1600 h_sync: 1624 h_sync_end
1704 h_blank_end 1800 h_border: 0
[ 104.124] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end
904 v_blanking: 1000 v_border: 0
[ 104.124] (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 30
H max: 80 kHz, PixClock max 165 MHz
[ 104.124] (II) RADEON(0): Serial No: LNY080034201
[ 104.124] (II) RADEON(0): Monitor name: Acer S201HL
[ 104.124] (II) RADEON(0): EDID (in hex):
[ 104.124] (II) RADEON(0): 00ffffffffffff000472a5019c872011
[ 104.124] (II) RADEON(0): 0c150103802c19782aee91a3544c9926
[ 104.124] (II) RADEON(0): 0f5054bfee80714f81c08100a9c00101
[ 104.124] (II) RADEON(0): 010101010101302a40c8608464301850
[ 104.124] (II) RADEON(0): 1300bbf91000001e000000fd00324c1e
[ 104.124] (II) RADEON(0): 5010000a202020202020000000ff004c
[ 104.124] (II) RADEON(0): 4e593038303033343230310a000000fc
[ 104.124] (II) RADEON(0): 00416365722053323031484c0a2000c3
[ 104.124] (II) RADEON(0): Printing probed modes for output DVI-0
[ 104.124] (II) RADEON(0): Modeline "1600x900"x60.0 108.00 1600
1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 104.124] (II) RADEON(0): Modeline "1280x800"x59.9 71.00 1280
1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 104.124] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152
1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 104.125] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280
1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 104.125] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 104.125] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024
1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 104.125] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 104.125] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 104.125] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 104.125] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 104.125] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 104.125] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 104.125] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 104.125] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 104.125] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 104.125] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 104.125] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 104.125] (II) RADEON(0): Output VGA-0 disconnected
[ 104.125] (II) RADEON(0): Output DVI-0 connected
[ 104.125] (II) RADEON(0): Using exact sizes for initial modes
[ 104.125] (II) RADEON(0): Output DVI-0 using initial mode 1600x900 +0+0
[ 104.125] (II) RADEON(0): mem size init: gart size :1fdff000 vram
size: s:8000000 visible:7a41000
[ 104.125] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 104.125] (==) RADEON(0): DPI set to (96, 96)
[ 104.125] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[ 104.125] (II) Loading sub module "ramdac"
[ 104.125] (II) LoadModule: "ramdac"
[ 104.125] (II) Module "ramdac" already built-in
[ 104.125] (II) UnloadModule: "modesetting"
[ 104.125] (II) Unloading modesetting
[ 104.125] (II) UnloadModule: "vesa"
[ 104.125] (II) Unloading vesa
[ 104.125] (II) RADEON(0): [DRI2] Setup complete
[ 104.125] (II) RADEON(0): [DRI2] DRI driver: r300
[ 104.125] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 104.125] (II) RADEON(0): Front buffer size: 5625K
[ 104.125] (II) RADEON(0): VRAM usage limit set to 107577K
[ 104.125] (==) RADEON(0): DRI3 disabled
[ 104.125] (==) RADEON(0): Backing store enabled
[ 104.126] (II) RADEON(0): Direct rendering enabled
[ 104.126] (II) RADEON(0): Render acceleration enabled for
R300/R400/R500 type cards.
[ 104.126] (II) EXA(0): Driver allocated offscreen pixmaps
[ 104.126] (II) EXA(0): Driver registered support for the following
operations:
[ 104.126] (II) Solid
[ 104.126] (II) Copy
[ 104.126] (II) Composite (RENDER acceleration)
[ 104.126] (II) UploadToScreen
[ 104.126] (II) DownloadFromScreen
[ 104.126] (II) RADEON(0): Acceleration enabled
[ 104.126] (==) RADEON(0): DPMS enabled
[ 104.126] (==) RADEON(0): Silken mouse enabled
[ 104.126] (II) RADEON(0): Set up textured video
[ 104.126] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 104.126] (II) RADEON(0): [XvMC] Extension initialized.
[ 104.126] (II) Initializing extension Generic Event Extension
[ 104.126] (II) Initializing extension SHAPE
[ 104.126] (II) Initializing extension MIT-SHM
[ 104.126] (II) Initializing extension XInputExtension
[ 104.126] (II) Initializing extension XTEST
[ 104.126] (II) Initializing extension BIG-REQUESTS
[ 104.126] (II) Initializing extension SYNC
[ 104.126] (II) Initializing extension XKEYBOARD
[ 104.127] (II) Initializing extension XC-MISC
[ 104.127] (II) Initializing extension XFIXES
[ 104.127] (II) Initializing extension RENDER
[ 104.127] (II) Initializing extension RANDR
[ 104.127] (II) Initializing extension COMPOSITE
[ 104.127] (II) Initializing extension DAMAGE
[ 104.127] (II) Initializing extension MIT-SCREEN-SAVER
[ 104.127] (II) Initializing extension DOUBLE-BUFFER
[ 104.127] (II) Initializing extension RECORD
[ 104.127] (II) Initializing extension DPMS
[ 104.127] (II) Initializing extension Present
[ 104.127] (II) Initializing extension DRI3
[ 104.127] (II) Initializing extension X-Resource
[ 104.127] (II) Initializing extension XVideo
[ 104.127] (II) Initializing extension XVideo-MotionCompensation
[ 104.127] (II) Initializing extension GLX
[ 104.180] (II) AIGLX: Loaded and initialized r300
[ 104.180] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 104.180] (II) Initializing extension XFree86-VidModeExtension
[ 104.180] (II) Initializing extension XFree86-DGA
[ 104.180] (II) Initializing extension XFree86-DRI
[ 104.180] (II) Initializing extension DRI2
[ 104.180] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 104.234] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 104.234] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 104.234] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 104.234] (**) Power Button: Applying InputClass "keyboard-all"
[ 104.234] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 104.234] (II) LoadModule: "libinput"
[ 104.234] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 104.234] (II) Module libinput: vendor="X.Org Foundation"
[ 104.234] compiled for 1.20.11, module version = 1.0.0
[ 104.235] Module class: X.Org XInput Driver
[ 104.235] ABI class: X.Org XInput driver, version 24.1
[ 104.235] (II) Using input driver 'libinput' for 'Power Button'
[ 104.235] (**) Power Button: always reports core events
[ 104.235] (**) Option "Device" "/dev/input/event1"
[ 104.235] (**) Option "_source" "server/udev"
[ 104.237] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 104.237] (II) event1 - Power Button: device is a keyboard
[ 104.237] (II) event1 - Power Button: device removed
[ 104.241] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 104.241] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 104.241] (**) Option "xkb_layout" "us"
[ 104.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 104.278] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 104.278] (II) event1 - Power Button: device is a keyboard
[ 104.279] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 104.279] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 104.279] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 104.279] (**) Power Button: Applying InputClass "keyboard-all"
[ 104.279] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 104.279] (II) Using input driver 'libinput' for 'Power Button'
[ 104.279] (**) Power Button: always reports core events
[ 104.279] (**) Option "Device" "/dev/input/event0"
[ 104.279] (**) Option "_source" "server/udev"
[ 104.280] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 104.280] (II) event0 - Power Button: device is a keyboard
[ 104.280] (II) event0 - Power Button: device removed
[ 104.283] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 104.283] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 104.283] (**) Option "xkb_layout" "us"
[ 104.283] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 104.284] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 104.284] (II) event0 - Power Button: device is a keyboard
[ 104.285] (II) config/udev: Adding input device Dell Dell USB
Keyboard (/dev/input/event6)
[ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass
"libinput keyboard catchall"
[ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass "keyboard-all"
[ 104.285] (**) Dell Dell USB Keyboard: Applying InputClass
"libinput keyboard catchall"
[ 104.285] (II) Using input driver 'libinput' for 'Dell Dell USB Keyboard'
[ 104.285] (**) Dell Dell USB Keyboard: always reports core events
[ 104.285] (**) Option "Device" "/dev/input/event6"
[ 104.285] (**) Option "_source" "server/udev"
[ 104.286] (II) event6 - Dell Dell USB Keyboard: is tagged by udev
as: Keyboard
[ 104.286] (II) event6 - Dell Dell USB Keyboard: device is a keyboard
[ 104.286] (II) event6 - Dell Dell USB Keyboard: device removed
[ 104.294] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:413C:2003.0001/input/input9/event6"
[ 104.294] (II) XINPUT: Adding extended input device "Dell Dell USB
Keyboard" (type: KEYBOARD, id 8)
[ 104.294] (**) Option "xkb_layout" "us"
[ 104.294] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 104.295] (II) event6 - Dell Dell USB Keyboard: is tagged by udev
as: Keyboard
[ 104.295] (II) event6 - Dell Dell USB Keyboard: device is a keyboard
[ 104.296] (II) config/udev: Adding input device Microsoft Microsoft
Optical Mouse with Tilt Wheel Consumer Control (/dev/input/event7)
[ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "keyboard-all"
[ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 104.296] (II) Using input driver 'libinput' for 'Microsoft
Microsoft Optical Mouse with Tilt Wheel Consumer Control'
[ 104.296] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: always reports core events
[ 104.296] (**) Option "Device" "/dev/input/event7"
[ 104.296] (**) Option "_source" "server/udev"
[ 104.297] (II) event7 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: is tagged by udev as: Keyboard
[ 104.297] (II) event7 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: device is a keyboard
[ 104.297] (II) event7 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: device removed
[ 104.310] (II) libinput: Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: needs a virtual subdevice
[ 104.310] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input10/event7"
[ 104.310] (II) XINPUT: Adding extended input device "Microsoft
Microsoft Optical Mouse with Tilt Wheel Consumer Control" (type:
MOUSE, id 9)
[ 104.310] (**) Option "AccelerationScheme" "none"
[ 104.310] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: (accel) selected scheme none/0
[ 104.310] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: (accel) acceleration factor: 2.000
[ 104.310] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: (accel) acceleration threshold: 4
[ 104.311] (II) event7 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: is tagged by udev as: Keyboard
[ 104.311] (II) event7 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: device is a keyboard
[ 104.312] (II) config/udev: Adding input device Microsoft Microsoft
Optical Mouse with Tilt Wheel Mouse (/dev/input/event8)
[ 104.312] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Mouse: Applying InputClass "evdev pointer catchall"
[ 104.312] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Mouse: Applying InputClass "libinput pointer catchall"
[ 104.312] (II) Using input driver 'libinput' for 'Microsoft
Microsoft Optical Mouse with Tilt Wheel Mouse'
[ 104.312] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Mouse: always reports core events
[ 104.312] (**) Option "Device" "/dev/input/event8"
[ 104.312] (**) Option "_source" "server/udev"
[ 104.313] (II) event8 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Mouse: is tagged by udev as: Mouse
[ 104.313] (II) event8 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Mouse: device is a pointer
[ 104.313] (II) event8 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Mouse: device removed
[ 104.326] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input11/event8"
[ 104.326] (II) XINPUT: Adding extended input device "Microsoft
Microsoft Optical Mouse with Tilt Wheel Mouse" (type: MOUSE, id 10)
[ 104.326] (**) Option "AccelerationScheme" "none"
[ 104.326] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Mouse: (accel) selected scheme none/0
[ 104.326] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Mouse: (accel) acceleration factor: 2.000
[ 104.326] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Mouse: (accel) acceleration threshold: 4
[ 104.327] (II) event8 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Mouse: is tagged by udev as: Mouse
[ 104.327] (II) event8 - Microsoft Microsoft Optical Mouse with
Tilt Wheel Mouse: device is a pointer
[ 104.328] (II) config/udev: Adding input device Microsoft Microsoft
Optical Mouse with Tilt Wheel Mouse (/dev/input/mouse0)
[ 104.328] (II) No input driver specified, ignoring this device.
[ 104.328] (II) This device may have been added with another device file.
[ 104.328] (II) config/udev: Adding input device HDA ATI SB Rear Mic
(/dev/input/event2)
[ 104.329] (II) No input driver specified, ignoring this device.
[ 104.329] (II) This device may have been added with another device file.
[ 104.329] (II) config/udev: Adding input device HDA ATI SB Front
Mic (/dev/input/event3)
[ 104.329] (II) No input driver specified, ignoring this device.
[ 104.329] (II) This device may have been added with another device file.
[ 104.329] (II) config/udev: Adding input device HDA ATI SB Line
(/dev/input/event4)
[ 104.329] (II) No input driver specified, ignoring this device.
[ 104.329] (II) This device may have been added with another device file.
[ 104.330] (II) config/udev: Adding input device HDA ATI SB Line Out
(/dev/input/event5)
[ 104.330] (II) No input driver specified, ignoring this device.
[ 104.330] (II) This device may have been added with another device file.
[ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "keyboard-all"
[ 104.336] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 104.336] (II) Using input driver 'libinput' for 'Microsoft
Microsoft Optical Mouse with Tilt Wheel Consumer Control'
[ 104.337] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel
Consumer Control: always reports core events
[ 104.337] (**) Option "Device" "/dev/input/event7"
[ 104.337] (**) Option "_source" "_driver/libinput"
[ 104.337] (II) libinput: Microsoft Microsoft Optical Mouse with
Tilt Wheel Consumer Control: is a virtual subdevice
[ 104.337] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:00D1.0002/input/input10/event7"
[ 104.337] (II) XINPUT: Adding extended input device "Microsoft
Microsoft Optical Mouse with Tilt Wheel Consumer Control" (type:
KEYBOARD, id 11)
[ 104.337] (**) Option "xkb_layout" "us"
[ 104.337] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[root@ ~]#
I have run
# Xorg -configure
and it yields a radeon
driver but it does not work. Screen goes blank and CTRL+ALT+BACKSPACE
does not work and I have to poweroff(by pressing and holding
powerbutton) or hitting reset.
I have already installed Xorg and Xfce but no X. How can I get X
working on this machine?
Thank you in advance for help and suggestions. I nuked 5.2
installation to upgrade to 6.0.1, I tried upgrading from source, but
machine just froze several times :(
Best Regards,
Antonio
More information about the Users
mailing list