6.0 and console on ThinkPad x220

[karu.pruun]

Hello

You can try setting a different mode at the loader: get to the prompt
(press 9) and play with 'gop list', 'gop set <n>' and 'gop get'. Maybe
you can find a resolution that works fine?

If yes, try loading i915 in /etc/rc.conf, that's the recommended
procedure. Loading i915 too early may blow up booting. You don't need
to load drm explicitly, it's a prerequisite of i915 and will be loaded
automatically.

Best

Peeter

--

On Wed, May 19, 2021 at 12:50 AM Chuck Musser <cmusser at sonic.net> wrote:
>
> Related (maybe) to this are these messages in dmesg:
>
> vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xe0000000-0xefffffff,0xf0000000-0xf03fffff irq 16 at device 2.0 on pci0
> [drm] pdev:  vendor=0x8086  device=0x0126 rev=0x09
> [drm]       svendor=0x17aa sdevice=0x21da irq=17
> WARN_ON(domain->wake_count == 0)error: [drm:pid0:gen6_gmch_probe] *ERROR* Can't set DMA mask/consistent mask (-5)
> [drm] Memory usable by graphics device = 2048M
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] Driver supports precise vblank timestamp query.
> tunable drm.video.LVDS-1 is not set
> tunable drm.video.VGA-1 is not set
> tunable drm.video.HDMI-A-1 is not set
> tunable drm.video.DP-1 is not set
> tunable drm.video.HDMI-A-2 is not set
> tunable drm.video.HDMI-A-3 is not set
> tunable drm.video.DP-2 is not set
> tunable drm.video.DP-3 is not set
> RPM wakelock ref not held during HW access<4>RPM wakelock ref not held during HW access<6>[drm] taking over the fictitious range 0xe0000000-0x10000000
> [drm] Initialized i915 1.6.0 20171023 for dev_name on minor 0
> kms console: xpixels 1366 ypixels 768
> WARNING !set->fb failed at /usr/src/sys/dev/drm/drm/../drm_atomic_helper.c:2750
> WARNING state->crtc && !state->fb failed at /usr/src/sys/dev/drm/drm/../drm_atomic.c:862
> [drm] DRM_I915_DEBUG_GEM enabled
> drm0 on vgapci0
>
>
>
>
> They are labeled "WARNINGS", but maybe more serious?