crc errors and installation troubles

Justin Sherrill justin at shiningsilence.com
Fri Jan 15 13:31:28 PST 2021


Is the SSD connected using the same cable and motherboard port as the HDD
used?  It's not likely to be the reason, but trying a different cable and
port may be useful if you are not doing that already.  If changing those
helps, then the problem was the connection and not the disk.

On Fri, Jan 15, 2021 at 12:19 PM Antonio Olivares <olivares14031 at gmail.com>
wrote:

> Dear kind Dragonfly BSD users,
>
> I had a 320GB sata hd with dragonflyBSD installed.  I upgraded it to 5.83
> thanks to help from users here on list.  The disk is turning bad and the
> system boots but when I try to run a program it freezes.  I removed the
> hard drive and installed an SSD and I get lots of errors and am unable to
> get it working.  I have some screenshots if needed.  Ssd is a kingston 480
> GB .  Any pointers and advice are appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20210115/b8b4a56a/attachment-0004.htm>


More information about the Users mailing list