No sound from front headphones jack

Siju George sgeorge.ml at gmail.com
Mon Mar 2 01:11:44 PST 2020


On Mon, Feb 17, 2020 at 10:14 PM Michael Neumann <mneumann at ntecs.de> wrote:

>
> Try setting:
>
>     sysctl hw.snd.default_unit=n
>
> for some number of "n".
>
> Maybe
>
>     sysctl hw.snd.default_unit=25
>
> or
>
>     sysctl hw.snd.default_unit=27
>
> could work. If I am not mistaken, "n" is the "nid" that you see in the
> dmesg
> output.
>
>
Thank you so much Michael :-)

I tried but it did not work. Please see the output

# sysctl hw.snd.default_unit=25
hw.snd.default_unit: 1
sysctl: hw.snd.default_unit=25: Invalid argument
# sysctl hw.snd.default_unit=2
hw.snd.default_unit: 1 -> 2
# sysctl hw.snd.default_unit=3
hw.snd.default_unit: 2 -> 3
# sysctl hw.snd.default_unit=4
hw.snd.default_unit: 3
sysctl: hw.snd.default_unit=4: Invalid argument
# sysctl hw.snd.default_unit=5
hw.snd.default_unit: 3
sysctl: hw.snd.default_unit=5: Invalid argument
# sysctl hw.snd.default_unit=6
hw.snd.default_unit: 3
sysctl: hw.snd.default_unit=6: Invalid argument
# sysctl hw.snd.default_unit=7
hw.snd.default_unit: 3
sysctl: hw.snd.default_unit=7: Invalid argument


 >
> > The dmesg is
> >
> > Copyright (c) 2003-2020 The DragonFly Project.
> > Copyright (c) 1992-2003 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights reserved.
> > DragonFly v5.7.0.1284.g34ca1-DEVELOPMENT #0: Fri Jan 17 11:33:25 UTC 2020
> >     root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
> > acpi_hpet: frequency 14318180
> > Using cputimer HPET for TSC calibration
> > Timer latency (in TSC ticks): 2781 min=2700 max=2970
> > TSC invariant clock: 2994372204 Hz
> > CPU: AMD Ryzen 7 1700 Eight-Core Processor           (2994.37-MHz
> K8-class CPU)
> >   Origin = "AuthenticAMD"  Id = 0x800f11  Stepping = 1
> >
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> >
>  Features2=0x76d8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,AVX,F16C,RDRND>
> >   AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
> >   AMD
> Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCX_CORE,PCX_NB,DBE,PCX_L2I,MWAITX>
> >   Structured Extended
> > Features=0x209c01a9<GSFSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP>
> >   Thermal and PM Features=0x4<ARAT>
> >   MONITOR/MWAIT Features=0x2<INTBRK>
> > CPU Special Features Installed: SMAP SMEP
> > real memory  = 17128202240 (16334 MB)
> > avail memory = 16526249984 (15760 MB)
> >    LAPIC AMD elvt0: 0x00010000
> >    LAPIC AMD elvt1: 0x00010000
> >    LAPIC AMD elvt2: 0x00010000
> >    LAPIC AMD elvt3: 0x00010000
> > LAPIC latency (in TSC ticks): 346 min: 330 max: 360
> > lapic: divisor index 0, frequency 49906209 Hz
> > core_bits 4 logical_CPU_bits 0
> > 2-way htt, 1 Nodes, 8 cores/node
> > CPU Topology: cores_per_chip: 8; threads_per_core: 2; chips_per_package:
> 1;
> > Compute unit iDS:
> > 0-0;
> > vm_page: avg 3798 pages per queue, 1024 queues
> > SMI Frequency (worst case): 78 Hz (12675 us)
> > Initialize MI interrupts for 16 cpus
> > TSC testing MP synchronization ...
> > TSC MPSYNC TEST 3150 16 -> 196 (10uS=29943)
> > TSC is MP synchronized
> > TSC: cputimer freq 93574131, shift 5
> > Spectre: support=( none ) req=ffff operating=( none )
> > MDS: support=( MDS_NOT_REQUIRED ) req=0000 operating=( none )
> > wdog: In-kernel automatic watchdog reset enabled
> > evdev device loaded.
> > kbd1 at kbdmux0
> > md0: Malloc disk
> > ACPI: DSDT 0x00000000DC0921E8 0058E9 (v02 ALASKA A M I    01072009
> > INTL 20120913)
> > ACPI: FACS 0x00000000DC46EC80 000040
> > ACPI: APIC 0x00000000DC097BF0 0000DE (v03 ALASKA A M I    01072009 AMI
> >  00010013)
> > ACPI: FPDT 0x00000000DC097CD0 000044 (v01 ALASKA A M I    01072009 AMI
> >  00010013)
> > ACPI: SSDT 0x00000000DC097D18 008C4C (v02                 00000002
> > MSFT 04000000)
> > ACPI: FIDT 0x00000000DC0A0968 00009C (v01 ALASKA A M I    01072009 AMI
> >  00010013)
> > ACPI: SSDT 0x00000000DC0A0A08 0020E4 (v01 AMD    AmdTable 00000001 AMD
> >  00000001)
> > ACPI: SRAT 0x00000000DC0A2AF0 000130 (v03 AMD    AmdTable 00000001 AMD
> >  00000001)
> > ACPI: CRAT 0x00000000DC0A2C20 000F50 (v01 AMD    AmdTable 00000001 AMD
> >  00000001)
> > ACPI: CDIT 0x00000000DC0A3B70 000029 (v01 AMD    AmdTable 00000001 AMD
> >  00000001)
> > ACPI: SSDT 0x00000000DC0A3BA0 0017E1 (v01 AMD    AOD      00000001
> > INTL 20120913)
> > ACPI: MCFG 0x00000000DC0A5388 00003C (v01 ALASKA A M I    01072009
> > MSFT 00010013)
> > ACPI: HPET 0x00000000DC0A53C8 000038 (v01 ALASKA A M I    01072009 AMI
> >  00000005)
> > ACPI: SSDT 0x00000000DC0A5400 000024 (v01 AMDFCH FCHZP    00001000
> > INTL 20120913)
> > ACPI: UEFI 0x00000000DC0A5428 000042 (v01                 00000000
> >  00000000)
> > ACPI: BGRT 0x00000000DC0A5470 000038 (v01 ALASKA ALASKAA  01072009 AMI
> >  00010013)
> > ACPI: IVRS 0x00000000DC0A54A8 0000D0 (v02                 00000001 AMD
> >  00000000)
> > ACPI: SSDT 0x00000000DC0A5578 0000F8 (v01                 00001000
> > INTL 20120913)
> > ACPI: SSDT 0x00000000DC0A5670 001664 (v01 AMD    CPMCMN   00000001
> > INTL 20120913)
> > sc0: <System console> on motherboard
> > sc0: EFI_FB <16 virtual consoles, flags=0x700>
> > cryptosoft0: <software crypto> on motherboard
> > acpi0: <ALASKA A M I> on motherboard
> > ACPI: 7 ACPI AML tables successfully acquired and loaded
> > ACPI FADT: SCI testing interrupt mode ...
> > ACPI FADT: SCI select level/low
> > acpi0: Power Button (fixed)
> > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> > acpi_timer0 on acpi0
> > cpu0: <ACPI CPU> on acpi0
> > cpu_cst0: <ACPI CPU C-State> on cpu0
> > cpu_pst0: <ACPI CPU P-State> on cpu0
> > cpu1: <ACPI CPU> on acpi0
> > cpu_cst1: <ACPI CPU C-State> on cpu1
> > cpu_pst1: <ACPI CPU P-State> on cpu1
> > cpu2: <ACPI CPU> on acpi0
> > cpu_cst2: <ACPI CPU C-State> on cpu2
> > cpu_pst2: <ACPI CPU P-State> on cpu2
> > cpu3: <ACPI CPU> on acpi0
> > cpu_cst3: <ACPI CPU C-State> on cpu3
> > cpu_pst3: <ACPI CPU P-State> on cpu3
> > cpu4: <ACPI CPU> on acpi0
> > cpu_cst4: <ACPI CPU C-State> on cpu4
> > cpu_pst4: <ACPI CPU P-State> on cpu4
> > cpu5: <ACPI CPU> on acpi0
> > cpu_cst5: <ACPI CPU C-State> on cpu5
> > cpu_pst5: <ACPI CPU P-State> on cpu5
> > cpu6: <ACPI CPU> on acpi0
> > cpu_cst6: <ACPI CPU C-State> on cpu6
> > cpu_pst6: <ACPI CPU P-State> on cpu6
> > cpu7: <ACPI CPU> on acpi0
> > cpu_cst7: <ACPI CPU C-State> on cpu7
> > cpu_pst7: <ACPI CPU P-State> on cpu7
> > cpu8: <ACPI CPU> on acpi0
> > cpu_cst8: <ACPI CPU C-State> on cpu8
> > cpu_pst8: <ACPI CPU P-State> on cpu8
> > cpu9: <ACPI CPU> on acpi0
> > cpu_cst9: <ACPI CPU C-State> on cpu9
> > cpu_pst9: <ACPI CPU P-State> on cpu9
> > cpu10: <ACPI CPU> on acpi0
> > cpu_cst10: <ACPI CPU C-State> on cpu10
> > cpu_pst10: <ACPI CPU P-State> on cpu10
> > cpu11: <ACPI CPU> on acpi0
> > cpu_cst11: <ACPI CPU C-State> on cpu11
> > cpu_pst11: <ACPI CPU P-State> on cpu11
> > cpu12: <ACPI CPU> on acpi0
> > cpu_cst12: <ACPI CPU C-State> on cpu12
> > cpu_pst12: <ACPI CPU P-State> on cpu12
> > cpu13: <ACPI CPU> on acpi0
> > cpu_cst13: <ACPI CPU C-State> on cpu13
> > cpu_pst13: <ACPI CPU P-State> on cpu13
> > cpu14: <ACPI CPU> on acpi0
> > cpu_cst14: <ACPI CPU C-State> on cpu14
> > cpu_pst14: <ACPI CPU P-State> on cpu14
> > cpu15: <ACPI CPU> on acpi0
> > cpu_cst15: <ACPI CPU C-State> on cpu15
> > cpu_pst15: <ACPI CPU P-State> on cpu15
> > acpi_button0: <Power Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pci0: <base peripheral> (vendor 0x1022, dev 0x1451) at device 0.2
> > pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > nvme0: <NVME-PCIe> mem 0xfe900000-0xfe903fff irq 24 at device 0.0 on pci1
> > nvme0: mapped 8 MSIX IRQs
> > nvme0: NVME Version 1.2 maxqe=16384 caps=00f000203c033fff
> > nvme0: Model Samsung_SSD_960_PRO_512GB BaseSerial S3EWNX0J705737N
> nscount=1
> > nvme0: Request 32/16 queues, Returns 8/8 queues, rw-sep map (8, 8)
> > nvme0: Interrupt Coalesce: 100uS / 4 qentries
> > nvme0: Disk nvme0 ns=1 blksize=512 lbacnt=1000215216 cap=476GB
> > serno=S3EWNX0J705737N-1
> > pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0
> > pci3: <ACPI PCI bus> on pcib2
> > xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe7a0000-0xfe7a7fff
> > irq 32 at device 0.0 on pci3
> > xhci0: 32 bytes context size, 64-bit DMA
> > usbus0 on xhci0
> > usbus0: 5.0Gbps Super Speed USB v3.0
> > ahci0: <AHCI-PCI-SATA> mem 0xfe780000-0xfe79ffff irq 33 at device 0.1 on
> pci3
> > ugen0.1: <0x1022> at usbus0
> > uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
> > ahci0: AE did not auto-clear!
> > ahci0: AHCI 1.3.1 cap
> > 0xef36ff27<S64A,NCQ,SSNTF,SSS,SALP,SAL,SCLO,SAM,SPM,PMD,SSC,PSC,SXS>
> > cap2 0x3c<DESO,SADM,SDS,APST>, 8 ports, 32 tags/port, gen 3 (6Gbps)
> > uhub0: 22 ports with 22 removable, self powered
> > ugen0.2: <VIA Labs, Inc.> at usbus0
> > uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/b.e0, addr 1> on
> usbus0
> > uhub1: 4 ports with 4 removable, self powered
> > ugen0.3: <Logitech> at usbus0
> > ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 2> on
> usbus0
> > kbd2 at ukbd0
> > ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 2> on
> usbus0
> > ums0: 18 buttons and [XYZT] coordinates ID=2
> > ugen0.4: <SIGMACHIP> at usbus0
> > ukbd1: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.50, addr 3> on
> usbus0
> > kbd3 at ukbd1
> > uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.50, addr 3> on
> usbus0
> > ahci0.0: PMPROBE PM Signature not detected
> > ugen0.5: <Realtek> at usbus0
> > ahci0.0: Found DISK "ST2000DM006-2DM164 CC26" serial="Z4Z8Y30L"
> > ahci0.0: tags=32/32 satacap=850e satacap2=0006 satafea=00cc NCQ=YES
> > capacity=1907729.08MB
> > ahci0.0: f85=3469 f86=bc49 f87=4163 WC=enabled RA=enabled SEC=frozen
> > ahci0.1: No device detected
> > ahci0.5: No device detected
> > ahci0.4: No device detected
> > pcib3: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci3
> > pci4: <ACPI PCI bus> on pcib3
> > pcib3: No _PRT found, routing with pci
> > pcib3: No _PRT found, routing with pci
> > pcib3: No _PRT found, routing with pci
> > pcib4: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci4
> > pci5: <ACPI PCI bus> on pcib4
> > pcib4: No _PRT found, routing with pci
> > pcib3: No _PRT found, routing with pci
> > re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem
> > 0xf0000000-0xf0003fff,0xfe600000-0xfe600fff irq 32 at device 0.0 on
> > pci5
> > re0: MAC version 0x4c000000, MACFG 56, support MSI
> > re0: bus speed 125MHz
> > re0: MAC address: 1c:1b:0d:e6:86:fb
> > pcib5: <MPTABLE PCI-PCI bridge> irq 33 at device 1.0 on pci4
> > pci6: <PCI bus> on pcib5
> > pcib6: <MPTABLE PCI-PCI bridge> irq 32 at device 4.0 on pci4
> > pci7: <PCI bus> on pcib6
> > pcib3: No _PRT found, routing with pci
> > pcib3: No _PRT found, routing with pci
> > vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
> > 0xfe520000-0xfe53ffff,0xe0000000-0xefffffff irq 32 at device 0.0 on
> > pci7
> > vgapci0: Boot video device
> > hdac0: <ATI RV910 HDA Controller> mem 0xfe540000-0xfe543fff irq 33 at
> > device 0.1 on pci7
> > hdac0: link ctrl 0x2910
> > hdac0: disable nosnoop
> > pcib7: <ACPI PCI-PCI bridge> at device 7.1 on pci0
> > pci17: <ACPI PCI bus> on pcib7
> > acpi_sysresource2: Conflicts with PCI device 17:0:2
> > pci17: <unknown> (vendor 0x1022, dev 0x145a) at device 0.0
> > pci17: <encrypt/decrypt> (vendor 0x1022, dev 0x1456) at device 0.2 irq 36
> > xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe200000-0xfe2fffff
> > irq 37 at device 0.3 on pci17
> > xhci1: 64 bytes context size, 64-bit DMA
> > usbus1 on xhci1
> > usbus1: 5.0Gbps Super Speed USB v3.0
> > pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0
> > pci18: <ACPI PCI bus> on pcib8
> > pci18: <unknown> (vendor 0x1022, dev 0x1455) at device 0.0
> > ugen1.1: <0x1022> at usbus1
> > ahci1: <AHCI-PCI-SATA> mem 0xfe808000-0xfe808fff irq 42 at device 0.2 on
> pci18
> > uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
> > ahci1: AE did not auto-clear!
> > uhub2: 8 ports with 8 removable, self powered
> > ahci1: AHCI 1.3.1 cap
> >
> 0xf737ff21<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SAM,SPM,FBSS,PMD,SSC,PSC,SXS>
> > cap2 0x0, 2 ports, 32 tags/port, gen 3 (6Gbps)
> > ahci1.1: No device detected
> > ahci1.0: No device detected
> > hdac1: <AMD (0x1457) HDA Controller> mem 0xfe800000-0xfe807fff irq 43
> > at device 0.3 on pci18
> > hdac1: link ctrl 0x2830
> > hdac1: disable nosnoop
> > pci0: <serial bus, SMBus> (vendor 0x1022, dev 0x790b) at device 20.0
> > isab0: <PCI-ISA bridge> at device 20.3 on pci0
> > isa0: <ISA bus> on isab0
> > aesni0: <AES-CBC,AES-XTS> on motherboard
> > padlock0: No ACE support.
> > rdrand0: <RdRand RNG> on motherboard
> > orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
> > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > sio0: can't drain, serial port might not exist, disabling
> > sio1: can't drain, serial port might not exist, disabling
> > hpt27xx: no controller detected.
> > hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
> > hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
> > pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
> > hdacc1: <Realtek (0x1220) HDA CODEC> at cad 0 on hdac1
> > hdaa1: <Realtek (0x1220) Audio Function Group> at nid 1 on hdacc1
> > pcm1: <Realtek (0x1220) (Rear Analog 5.1/2.0)> at nid 20,22,21 and
> > 24,26 on hdaa1
> > pcm2: <Realtek (0x1220) (Front Analog)> at nid 27 and 25 on hdaa1
> > pcm3: <Realtek (0x1220) (Rear Digital)> at nid 30 on hdaa1
> > CAM: Configuring 6 busses
> > CAM: finished configuring all busses
> > da0 at ahci0 bus 0 target 0 lun 0
> > da0: <SATA ST2000DM006-2DM1 CC26> Fixed Direct Access SCSI-4 device
> > da0: Serial Number Z4Z8Y30L
> > da0: 600.000MB/s transfers
> > da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> > Mounting root from hammer2:serno/S3EWNX0J705737N-1.s1d
> > hammer2_mount: root 'serno/S3EWNX0J705737N-1.s1d'
> > hammer2_mount: dev="serno/S3EWNX0J705737N-1.s1d" label="ROOT" rdonly=1
> > hammer2: using volume header #2
> > hammer2_mount hmp=0xfffff80161280000 pmp=0xfffff8015cc30a00
> > DMA space used: 10452k, remaining available: 131072k
> > Mounting devfs
> > hammer2_mount: '/dev/serno/S3EWNX0J705737N-1.s1d at ROOT'
> > hammer2_mount: dev="/dev/serno/S3EWNX0J705737N-1.s1d" label="ROOT"
> rdonly=1
> > hammer2 mount "serno/S3EWNX0J705737N-1.s1d":  no recovery needed
> > hammer2_mount: '/dev/serno/S3EWNX0J705737N-1.s1e at DATA'
> > hammer2_mount: dev="/dev/serno/S3EWNX0J705737N-1.s1e" label="DATA"
> rdonly=0
> > hammer2: using volume header #0
> > hammer2 mount "/dev/serno/S3EWNX0J705737N-1.s1e":  no recovery needed
> > hammer2_mount hmp=0xfffff8037b300000 pmp=0xfffff8037b942e00
> > cdce0: <CDC Communications Control> on usbus0
> > ue0: <USB Ethernet> on cdce0
> > ue0: MAC address: 00:e0:97:00:3f:37
> > swap low/high-water marks set to 335541/503312
> > [drm] Initialized
> > [drm] radeon kernel modesetting enabled.
> > [drm] pdev:  vendor=0x1002  device=0x6779 rev=0x00
> > [drm]       svendor=0x1458 sdevice=0x22b2 irq=17
> > [drm] RADEON_IS_PCIE
> > [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779
> 0x1458:0x22B2 0x00).
> > radeon: No suitable DMA available.
> > radeon: No coherent DMA available.
> > [drm] register mmio base: 0xFE520000
> > [drm] register mmio size: 131072
> > [drm] radeon_atrm_get_bios: ===> Try ATRM...
> > [drm] radeon_atrm_get_bios: pci_find_class() found: 0:7:0:0,
> > vendor=1002, device=6779
> > [drm] radeon_atrm_get_bios: Get ACPI device handle
> > [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
> > [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
> > [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
> > [drm] ATOM BIOS: GV
> > drm0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M
> used)
> > drm0: info: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
> > [drm] Detected VRAM RAM=1024M, BAR=256M
> > [drm] RAM width 64bits DDR
> > [TTM] (struct ttm_mem_global *)0xfffff8037c2cb300
> > [TTM] Zone  kernel: Available graphics memory: 65536 kiB
> > [TTM] Zone   dma32: Available graphics memory: 65536 kiB
> > [TTM] Initializing pool allocator
> > [drm] radeon: 1024M of VRAM memory ready
> > [drm] radeon: 1024M of GTT memory ready.
> > [drm] Loading CAICOS Microcode
> > [drm] Internal thermal controller with fan control
> > [drm] radeon: dpm initialized
> > [drm] GART: num cpu pages 262144, num gpu pages 262144
> > error: [drm:pid861:evergreen_init] *ERROR* GPU acceleration disabled
> > for now on DragonFly
> > [drm] probing gen 2 caps for device 1002:6779 = 2/0
> > [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
> > [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
> > drm0: info: WB enabled
> > drm0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and
> > cpu addr 0x0xffffb800033b7c00
> > drm0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and
> > cpu addr 0x0xffffb800033b7c0c
> > drm0: info: fence driver on ring 5 use gpu addr 0x0000000000072118 and
> > cpu addr 0x0xfffff803805b9118
> > [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [drm] Driver supports precise vblank timestamp query.
> > [drm] radeon: irq initialized.
> > [drm] ring test on 0 succeeded in 1 usecs
> > [drm] ring test on 3 succeeded in 8 usecs
> > [drm] ring test on 5 succeeded in 2 usecs
> > [drm] UVD initialized successfully.
> > [drm] ib test on ring 0 succeeded in 0 usecs
> > [drm] ib test on ring 3 succeeded in 0 usecs
> > [drm] ib test on ring 5 succeeded
> > [drm] radeon_device_init: Taking over the fictitious range
> 0xe0000000-0xf0000000
> > [drm] hw_i2c forced on, you may experience display detection problems!
> > tunable drm.video.HDMI-A-1 is not set
> > tunable drm.video.DVI-D-1 is not set
> > tunable drm.video.VGA-1 is not set
> > [drm] Radeon Display Connectors
> > [drm] Connector 0:
> > [drm]   HDMI-A-1
> > [drm]   HPD2
> > [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
> > [drm]   Encoders:
> > [drm]     DFP1: INTERNAL_UNIPHY1
> > [drm] Connector 1:
> > [drm]   DVI-D-1
> > [drm]   HPD4
> > [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
> > [drm]   Encoders:
> > [drm]     DFP2: INTERNAL_UNIPHY
> > [drm] Connector 2:
> > [drm]   VGA-1
> > [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
> > [drm]   Encoders:
> > [drm]     CRT1: INTERNAL_KLDSCP_DAC1
> > [drm] fb mappable at 0xE0363000
> > [drm] vram apper at 0xE0000000
> > [drm] size 5324800
> > [drm] fb depth is 24
> > [drm]    pitch is 5888
> > kms console: xpixels 1440 ypixels 900
> > [drm] Initialized radeon 2.48.0 20080528 for (null) on minor 0
> > drm0 on vgapci0
>
> --
> Michael Neumann
> NTECS Consulting
> www.ntecs.de
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20200302/e5f0fb79/attachment-0002.htm>


More information about the Users mailing list