Re:    1. dscheck(vn0): b_bcount 2 is not on a sector boundary

Martin Aleksandrov Ivanov martin.ivanov at greenpocket.de
Tue Jun 9 22:38:28 PDT 2020


Hello Jonathan,

thank you very much for your reply. What I find strange is that these 
complaints only occur after installing mate or gnome. Without mate or 
gnome there are no complaints. Also, in a previous post I attached the 
boot messages from a verbose boot. They additionally spewed this out:

md1: invalid primary partition table: no magic.

I guess this has something to do with the fact that after installing 
DragonFly, I used OpenBSD to change a partition type on the same hard 
drive to A6 and Linux to change another partition type to 8e00. Maybe 
these manipulations by tools from other OSs have somehow changed the 
partition table so that DragonFly now complains?

Anyway, apart from these complaints the system works perfectly. Unless I 
get further clues, I am going to ignore the complaints.

Best regards,

Martin

On 2020-06-09 17:17, Jonathan Douglas Engwall wrote:
>
> On June 9, 2020, at 4:35 AM, users-request at dragonflybsd.org wrote:
>
> >Send Users mailing list submissions to
> >users at dragonflybsd.org
> >To subscribe or unsubscribe via the World Wide Web, visit
> >http://lists.dragonflybsd.org/mailman/listinfo/users
> >or, via email, send a message with subject or body 'help' to
> >users-request at dragonflybsd.org
> >You can reach the person managing the list at
> >users-owner at dragonflybsd.org
> >When replying, please edit your Subject line so it is more specific
> >than "Re: Contents of Users digest..."
> >Today's Topics:
> >   1. dscheck(vn0): b_bcount 2 is not on a sector boundary
> >      (Martin Aleksandrov Ivanov)
> >   2. RE: dscheck(vn0): b_bcount 2 is not on a sector boundary
> >      (Martin Aleksandrov Ivanov)
> >----------------------------------------------------------------------
> >Message: 1
> >Date: Tue, 9 Jun 2020 08:13:17 +0200
> >From: Martin Aleksandrov Ivanov <martin.ivanov at greenpocket.de>
> >To: users <users at dragonflybsd.org>
> >Subject: dscheck(vn0): b_bcount 2 is not on a sector boundary
> >Message-ID: <55ff039b-c051-b2f1-1f04-bb4e35127848 at greenpocket.de>
> >Content-Type: text/plain; charset="utf-8"; format=flowed
> >Dear all,
> >I am running the latest DragonFly on an ASUS laptop:
> >marto at dragonfly% uname -a
> >DragonFly dragonfly 5.8-RELEASE DragonFly v5.8.1-RELEASE #1: Thu May? 7
> >08:26:21 CEST 2020 root@:/usr/obj/usr/src/sys/X86_64_GENERIC? x86_64
> >After installing the mete desktop, I get the following boot messages:
> >dscheck(vn3): b_bcount 2 is not on a sector boundary (ssize 512)
> >dscheck(vn2): b_bcount 2 is not on a sector boundary (ssize 512)
> >dscheck(vn1): b_bcount 2 is not on a sector boundary (ssize 512)
> >dscheck(vn0): b_bcount 2 is not on a sector boundary (ssize 512)
> >md1: Malloc disk
> >If I remove mate and then do package autoremove, these boot messages
> >disappear. After installing mate again, the messages reappear. Do you
> >have an idea what these messages mean? Should I ignore them? Everything
> >seems to run OK on my system.
> >After spitting the above 5 lines, dmesg continues like this:
> >[drm] Initialized
> >[drm] pdev:? vendor=0x8086? device=0x591b rev=0x04
> >[drm]?????? svendor=0x1043 sdevice=0x1970 irq=17
> >WARN_ON(domain->wake_count == 0)<4>WARN_ON(domain->wake_count ==
> >0)<4>WARN_ON(domain->wake_count == 0)<6>[drm] Memory usable by graphics
> >device = 4096M
> >[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> >[drm] Driver supports precise vblank timestamp query.
> >i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
> >tunable drm.video.eDP-1 is not set
> >error: [drm:pid-1:csr_load_work_fn] *ERROR* Failed to load DMC firmware
> >[https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling
> >runtime power management.
> >tunable drm.video.DP-1 is not set
> >tunable drm.video.HDMI-A-1 is not set
> >tunable drm.video.DP-2 is not set
> >drm1: taking over the fictitious range 0x40000000-0x50000000
> >kms console: xpixels 1920 ypixels 1080
> >[drm] RC6 on
> >[drm] Initialized i915 1.6.0 20160711 for (null) on minor 0
> >drm1 on vgapci1
> >md2: Malloc disk
> Malloy is a type of memory. Your system is complaining about video 
> ram. If everything works, you can leave it?
> Everything works?
> >I guess some service is installed and turned on with the mate desktop.
> >This service should be responsible for the messages. My hard drive has 4
> >partitions that I created with gpt letting it automatically determine
> >partition boundaries.
> >I am looking forward to your feedback. Any suggestions will be 
> appreciated.
> >Best regards,
> >Martin
> >------------------------------
> >Message: 2
> >Date: Tue, 9 Jun 2020 11:34:58 +0200
> >From: Martin Aleksandrov Ivanov <martin.ivanov at greenpocket.de>
> >To: <users at dragonflybsd.org>
> >Subject: RE: dscheck(vn0): b_bcount 2 is not on a sector boundary
> >Message-ID: <c383aa94-a21b-caa3-fab8-71a198ca99fb at greenpocket.de>
> >Content-Type: text/plain; charset="utf-8"; Format="flowed"
> >Hello,
> >I am attaching the output of the verbose boot log before starting mate
> >(boot.log) and the output of dmesg issued from the runnig mate desktop
> >(mateBoot.log)
> >Something new I notice is:
> >md1: invalid primary partition table: no magic
> >Best regards,
> >Martin
> >-------------- next part --------------
> >An HTML attachment was scrubbed...
> >URL: 
> <http://lists.dragonflybsd.org/pipermail/users/attachments/20200609/b8c61b58/attachment.htm>;
> >-------------- next part --------------
> >A non-text attachment was scrubbed...
> >Name: boot.log
> >Type: text/x-log
> >Size: 108295 bytes
> >Desc: not available
> >URL: 
> <http://lists.dragonflybsd.org/pipermail/users/attachments/20200609/b8c61b58/attachment.bin>;
> >-------------- next part --------------
> >A non-text attachment was scrubbed...
> >Name: mateBoot.log
> >Type: text/x-log
> >Size: 110490 bytes
> >Desc: not available
> >URL: 
> <http://lists.dragonflybsd.org/pipermail/users/attachments/20200609/b8c61b58/attachment-0001.bin>;
> >------------------------------
> >Subject: Digest Footer
> >_______________________________________________
> >Users mailing list
> >Users at dragonflybsd.org
> >http://lists.dragonflybsd.org/mailman/listinfo/users
> >------------------------------
> >End of Users Digest, Vol 94, Issue 5
> >************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20200610/a61fe294/attachment-0002.htm>


More information about the Users mailing list