Call for test: Realtek wired NIC re(4)
Ronald Georgia
netverbs at gmail.com
Wed Dec 9 18:17:41 PST 2020
That might have done the trick. No hands yet.
On Thu, Dec 3, 2020 at 9:54 AM Sepherosa Ziehau <sepherosa at gmail.com> wrote:
> On Tue, Dec 1, 2020 at 8:43 PM Ron Georgia <netverbs at gmail.com> wrote:
> >
> > I do not experience any hangs with updates, if you by updates you mean
> > the whole "git pull; make build-all install-all" thing.
> >
> > I have a small "mini" pc that has two RealTek NICs. If the pc sits idle
> > for more than an hour I lose network connectivity. I can not access
> > anything on my networks or on any external site. I have to do a "sudo
> > service netif restart" to restore network capabilities. It happens only
> > on that machine. I'm not sure if it's a BIOS setting or something else.
>
> I pushed the changes to the master; it may help this case, since there
> are some register setting fixes in this driver update.
>
> Thanks,
> sephe
>
> >
> > On 11/29/2020 9:23 PM, Sepherosa Ziehau wrote:
> > > Do you mean you still suffer the intermittent hang with the update?
> > >
> > > On Sun, Nov 29, 2020 at 11:37 PM Ron Georgia <netverbs at gmail.com>
> wrote:
> > >> I have two machines with RealTek NICs. With "machine 1" the network
> > >> constantly needed to be restarted (service netif restart) with RELEASE
> > >> 5.8.3. So far under 5.9-DEVELOPMENT DragonFly
> > >> v5.9.0.1113.gbf66a-DEVELOPMENT #5 dhclient(?) continues to work.
> > >>
> > >> QUESTION: Is there a test framework or procedure I can use? Something
> > >> that might provide you with some test data?
> > >>
> > >> Machine 1:
> > >>
> > >> re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem
> > >> 0xd0800000-0xd0803fff,0xd0804000-0xd0804fff irq 16 at device 0.0 on
> pci1
> > >> re1: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem
> > >> 0xd0600000-0xd0603fff,0xd0604000-0xd0604fff irq 16 at device 0.0 on
> pci3
> > >>
> > >> DragonFly v5.9.0.1113.gbf66a-DEVELOPMENT #5: Sat Nov 28 22:14:25 EST
> 2020
> > >> root at mini01.ronverbs.dev:/usr/obj/usr/src/sys/X86_64_GENERIC
> > >> acpi_hpet: frequency 14318180
> > >> Using cputimer HPET for TSC calibration
> > >> Timer latency (in TSC ticks): 1673 min=1656 max=2040
> > >> TSC invariant clock: 1999999800 Hz
> > >> CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.00-MHz K8-class
> CPU)
> > >> Origin = "GenuineIntel" Id = 0x30678 Stepping = 8
> > >>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > >>
> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRND>
> > >> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
> > >> AMD Features2=0x101<LAHF,Prefetch>
> > >> Structured Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB,NFPUSG>
> > >> Structured Extended Features3=0xc000000<IBPB,STIBP>
> > >> Thermal and PM Features=0x7<SENSOR,TURBO,ARAT>
> > >> MONITOR/MWAIT Features=0x3<CST,INTBRK>
> > >> CPU Special Features Installed: SMEP
> > >> real memory = 8408166400 (8018 MB)
> > >> avail memory = 8068538368 (7694 MB)
> > >>
> > >> Machine 2:
> > >>
> > >> re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem
> > >> 0xf0300000-0xf0303fff,0xfcd00000-0xfcd00fff irq 29 at device 0.0 on
> pci4
> > >>
> > >> DragonFly v5.9.0.1017.g6be057-DEVELOPMENT #0: Fri Oct 30 10:42:52 UTC
> 2020
> > >> root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
> > >> acpi_hpet: frequency 14318180
> > >> Using cputimer HPET for TSC calibration
> > >> Timer latency (in TSC ticks): 5773 min=5705 max=5915
> > >> TSC invariant clock: 3493439208 Hz
> > >> CPU: AMD Ryzen 3 2200G with Radeon Vega Graphics (3493.44-MHz
> K8-class CPU)
> > >> Origin = "AuthenticAMD" Id = 0x810f10 Stepping = 0
> > >>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> > >>
> Features2=0x76d8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,AVX,F16C,RDRND>
> > >> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
> > >> AMD
> > >>
> Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCX_CORE,PCX_NB,DBE,PCX_L2I,MWAITX>
> > >> Structured Extended
> > >>
> Features=0x209c01a9<GSFSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
> > >> Thermal and PM Features=0x4<ARAT>
> > >> MONITOR/MWAIT Features=0x3<CST,INTBRK>
> > >> CPU Special Features Installed: SMAP SMEP
> > >> real memory = 14978347008 (14284 MB)
> > >> avail memory = 14382575616 (13716 MB)
> > >>
> > >>
> > >> On 2020-11-26 15:00, users-request at dragonflybsd.orgwrote:
> > >>> Send Users mailing list submissions to
> > >>> users at dragonflybsd.org
> > >>>
> > >>> To subscribe or unsubscribe via the World Wide Web, visit
> > >>> http://lists.dragonflybsd.org/mailman/listinfo/users
> > >>> or, via email, send a message with subject or body 'help' to
> > >>> users-request at dragonflybsd.org
> > >>>
> > >>> You can reach the person managing the list at
> > >>> users-owner at dragonflybsd.org
> > >>>
> > >>> When replying, please edit your Subject line so it is more specific
> > >>> than "Re: Contents of Users digest..."
> > >>>
> > >>>
> > >>> Today's Topics:
> > >>>
> > >>> 1. Re: Call for test: Realtek wired NIC re(4) (Romick)
> > >>> 2. Re: Call for test: Realtek wired NIC re(4) (Daniel Fojt)
> > >>>
> > >>>
> > >>>
> ----------------------------------------------------------------------
> > >>>
> > >>> Message: 1
> > >>> Date: Thu, 26 Nov 2020 13:00:05 +1000
> > >>> From: Romick<yellowrabbit2010 at gmail.com>
> > >>> To:users at dragonflybsd.org
> > >>> Subject: Re: Call for test: Realtek wired NIC re(4)
> > >>> Message-ID:<20201126030005.62oc3dsv4wklflkx at fly.home.net>
> > >>> Content-Type: text/plain; charset="us-ascii"
> > >>>
> > >>> On Wed, Nov 25, 2020 at 10:54:16PM +0800, Sepherosa Ziehau wrote:
> > >>>>
> https://gitweb.dragonflybsd.org/~sephe/dragonfly.git/shortlog/refs/heads/re-196.04
> > >>>>
> > >>>> So far, I have tested 8110, 8111, 8168 and 8125; all work as
> expected.
> > >>>>
> > >>>> For 8125, the other side will also have to support 2.5Gbase-T to get
> > >>>> it negotiated. For now, 2.5Gbase-T will be shown as 2500baseSX; it
> > >>>> will be fixed soon.
> > >>>>
> > >>>> Please help test. It will be committed early next week.
> > >>> I switched to the branch. The machine has booted up and works without
> > >>> any problems so far. Let you know if anything overflows or freezes :)
> > >>>
> > >>> card=0x81681849 chip=0x816810ec rev=0x15
> > >>> Realtek RTL8111H integrated into ASRock B450M motherboard.
> > >>> 100M mode.
> > >>>
> > >
> > >
>
>
>
> --
> Tomorrow Will Never Die
>
--
Ron Georgia
“90% of my problems are due to ignorance, the other 10% is because I just
don’t know any better.”
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20201209/5c6ee91f/attachment-0002.htm>
More information about the Users
mailing list