Failed make buildworld on 5.6.2
Chris Collinson
chriscollinson at toughnode.com
Sun Dec 8 14:21:58 PST 2019
There's nothing that stands out (to me) in the dmesg. This is the only error:
# dmesg | grep -i error
error: [drm:pid-1:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
I can post a full dmesg if that would help. However, I am currently running
memtest86 and it has found 2478 errors so far. I will look into that and try
make buildworld again when I can be confident about the hardware.
Thanks for your help.
Chris
On Sun, 8 Dec 2019, at 8:03 PM, Antonio Huete Jiménez wrote:
> Are you getting additional messages in 'dmesg' ? Can you run a memtest
> on that box?
>
> Chris Collinson <chriscollinson at toughnode.com> escribió:
>
> > I am a new user. I am running into problems trying to rebuild the system
> > from source on my Thinkpad x230. I have been following the instructions
> > in the Handbook on upgrading [1]. Any help pointing me in the right
> > direction would be appreciated. My understanding/assumptions:
> > - that some security and bug fixes make it into the latest stable
> > branch, for example [2].
> > - that whilst periodically there is a point release which includes bug
> > and security fixes i.e. 5.6.2, in the meantime I can download the
> > updated source code for the stable branch and rebuild my
> > system to take advantage of fixes (I know it doesn't actually say that
> > in the Handbook, and that may be where I am going wrong).
> >
> > I get the following error when I issue "make buildworld":
> > collect2: fatal error: ld terminated with signal 11 [Segmentation fault],
> > core dumped
> >
> > I can't see anything in the make or make.conf manpage which might help.
> > Perhaps this is a bug in ld (see [3] and [4])? But if so why is it just
> > me having the issue? I find it easier to believe that I am just doing
> > something wrong.
> > Thanks.
> > Chris
> >
> > [1] https://www.dragonflybsd.org/docs/handbook/Upgrading/
> > [2]
> > http://lists.dragonflybsd.org/pipermail/commits/2019-November/720105.html
> > [3]
> > https://stackoverflow.com/questions/25371372/collect2-error-ld-terminated-with-signal-11-segmentation-fault-core-dumped
> > [4] https://bugzilla.redhat.com/show_bug.cgi?id=1557346
> >
> > $ uname -a DragonFly 5.6-RELEASE DragonFly v5.6.2-RELEASE #3: Sat Aug
> > 10 10:28:36 EDT 2019
> > root at www.shiningsilence.com:/usr/obj/home/justin/release/5_6/sys/X86_64_GENERIC
> > x86_64
> >
> > # pwd
> > /usr/src
> >
> > # git checkout DragonFly_RELEASE_5_6
> > Already on 'DragonFly_RELEASE_5_6' Your branch is up to date with
> > 'origin/DragonFly_RELEASE_5_6'.
> >
> > # make -d e buildworld
> > [...]
> > make[5]:
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/.depend,
> > 219: ignoring stale .depend for
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/lib/libc.a make[5]:
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/.depend,
> > 219: ignoring stale .depend for
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/lib/libl.a make[5]:
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/.depend,
> > 219: ignoring stale .depend for
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/lib/libz.a cc -pipe -O
> > -I/usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/bulibs
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/bulibs
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../../../../contrib/binutils-2.27/include
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../../../../contrib/binutils-2.27/bfd
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../../../../contrib/binutils-2.27/binutils
> > -Dbin_dummy_emulation=bin_vanilla_emulation -std=gnu99 -o ar ar.o
> > not-ranlib.o arsup.o rename.o binemul.o emul_vanilla.o arparse.o arlex.o
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/bulibs/libbu.a
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/libbfd/libbfd.a
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/libiberty/libiberty.a
> > -ll -lz
> > collect2: fatal error: ld terminated with signal 11
> > [Segmentation fault], core dumped compilation terminated.
> >
> > *** Failed target: ar *** Failed command: cc -pipe -O
> > -I/usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/bulibs
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/bulibs
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../../../../contrib/binutils-2.27/include
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../../../../contrib/binutils-2.27/bfd
> > -I/usr/src/gnu/usr.bin/binutils227/block2/ar/../../../../../contrib/binutils-2.27/binutils
> > -Dbin_dummy_emulation=bin_vanilla_emulation -std=gnu99 -o ar ar.o
> > not-ranlib.o arsup.o rename.o binemul.o emul_vanilla.o arparse.o arlex.o
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/bulibs/libbu.a
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/libbfd/libbfd.a
> > /usr/obj/usr/src/ctools_x86_64_x86_64/usr/src/gnu/usr.bin/binutils227/block2/ar/../../block1/libiberty/libiberty.a
> > -ll -lz *** Error code 1
> >
> > Stop. make[5]: stopped in /usr/src/gnu/usr.bin/binutils227/block2/ar
> >
> > *** Failed target: _SUBDIR_all_ar *** Failed command: (if test -d
> > /usr/src/gnu/usr.bin/binutils227/block2/ar.x86_64; then echo "===>
> > gnu/usr.bin/binutils227/block2/ar.x86_64"; edir=ar.x86_64; cd
> > /usr/src/gnu/usr.bin/binutils227/block2/${edir}; else echo "===>
> > gnu/usr.bin/binutils227/block2/ar"; edir=ar; cd
> > /usr/src/gnu/usr.bin/binutils227/block2/${edir}; fi; make all
> > DIRPRFX=gnu/usr.bin/binutils227/block2/$edir/;) *** Error code 1
> >
> > Stop. make[4]: stopped in /usr/src/gnu/usr.bin/binutils227/block2
> >
> > *** Failed target: _SUBDIR_all_block2 *** Failed command: (if test -d
> > /usr/src/gnu/usr.bin/binutils227/block2.x86_64; then echo "===>
> > gnu/usr.bin/binutils227/block2.x86_64"; edir=block2.x86_64; cd
> > /usr/src/gnu/usr.bin/binutils227/${edir}; else echo "===>
> > gnu/usr.bin/binutils227/block2"; edir=block2; cd
> > /usr/src/gnu/usr.bin/binutils227/${edir}; fi; make all
> > DIRPRFX=gnu/usr.bin/binutils227/$edir/;) *** Error code 1
> >
> > Stop. make[3]: stopped in /usr/src/gnu/usr.bin/binutils227
> >
> > *** Failed target: ctools-gnu/usr.bin/binutils227 *** Failed command:
> > echo "===> gnu/usr.bin/binutils227 (cross-tools)"; cd
> > /usr/src/gnu/usr.bin/binutils227; make DIRPRFX=gnu/usr.bin/binutils227/
> > obj && make DIRPRFX=gnu/usr.bin/binutils227/ depend && make
> > DIRPRFX=gnu/usr.bin/binutils227/ all && make
> > DIRPRFX=gnu/usr.bin/binutils227/
> > DESTDIR=/usr/obj/usr/src/ctools_x86_64_x86_64 install *** Error code 1
> >
> > Stop. make[2]: stopped in /usr/src .CURDIR='/usr/src'
> > .OBJDIR='/usr/src' .TARGETS='cross-tools'
> > .ERROR_TARGET='ctools-gnu/usr.bin/binutils227' .MAKE.LEVEL='2'
> > .MAKE.MODE=''
> > PATH='/usr/obj/usr/src/btools_x86_64/usr/sbin:/usr/obj/usr/src/btools_x86_64/usr/bin:/usr/obj/usr/src/btools_x86_64/sbin:/usr/obj/usr/src/btools_x86_64/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/pkg/bin'
> > LD_LIBRARY_PATH='' MACHINE_ARCH='x86_64' MACHINE='x86_64' MAKEFILE=''
> > MAKESYSPATH='' MAKEOBJDIRPREFIX='/usr/obj/usr/src/ctools_x86_64_x86_64'
> > WORLD_ALTCOMPILER='gcc47'
> > DESTDIR='/usr/obj/usr/src/ctools_x86_64_x86_64' SHELL='/bin/csh'
> > .SHELL=''
> > .MAKE.MAKEFILES='/usr/src/share/mk/sys.mk /etc/defaults/make.conf
> > /usr/src/share/mk/bsd.cpu.mk /usr/src/share/mk/bsd.cpu.gcc80.mk
> > Makefile.inc1 /usr/src/share/mk/bsd.subdir.mk
> > /usr/src/share/mk/bsd.init.mk /usr/src/share/mk/bsd.own.mk' .PATH='.
> > /usr/src'
> >
> > *** Failed target: _cross-tools *** Failed command: cd /usr/src;
> > MAKEOBJDIRPREFIX=/usr/obj/usr/src/ctools_x86_64_x86_64 OBJTREE=/usr/obj
> > DESTDIR=/usr/obj/usr/src/ctools_x86_64_x86_64 LC_ALL=C
> > _SHLIBDIRPREFIX=/usr/obj/usr/src/ctools_x86_64_x86_64 INSTALL="sh
> > /usr/src/tools/install.sh"
> > TOOLS_PREFIX=/usr/obj/usr/src/ctools_x86_64_x86_64
> > USRDATA_PREFIX=/usr/obj/usr/src/world_x86_64 SELECT_LINKER=ld.gold
> > M4=/usr/obj/usr/src/btools_x86_64/usr/bin/m4
> > PATH=/usr/obj/usr/src/btools_x86_64/usr/sbin:/usr/obj/usr/src/btools_x86_64/usr/bin:/usr/obj/usr/src/btools_x86_64/sbin:/usr/obj/usr/src/btools_x86_64/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/pkg/bin
> > make -f Makefile.inc1 -DNO_GDB -DBOOTSTRAPPING -DNOMAN -DNOSHARED
> > -DSYSBUILD cross-tools *** Error code 1
> >
> > Stop. make[1]: stopped in /usr/src .CURDIR='/usr/src'
> > .OBJDIR='/usr/obj/usr/src' .TARGETS='buildworld'
> > .ERROR_TARGET='_cross-tools' .MAKE.LEVEL='1' .MAKE.MODE=''
> > PATH='/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/pkg/bin'
> > LD_LIBRARY_PATH='' MACHINE_ARCH='x86_64' MACHINE='x86_64' MAKEFILE=''
> > MAKESYSPATH='' MAKEOBJDIRPREFIX='/usr/obj' WORLD_ALTCOMPILER='gcc47'
> > DESTDIR='' SHELL='/bin/csh'
> > .SHELL=''
> > .MAKE.MAKEFILES='/usr/src/share/mk/sys.mk /etc/defaults/make.conf
> > /usr/src/share/mk/bsd.cpu.mk /usr/src/share/mk/bsd.cpu.gcc80.mk
> > /usr/src/Makefile.inc1 /usr/src/share/mk/bsd.subdir.mk
> > /usr/src/share/mk/bsd.init.mk /usr/src/share/mk/bsd.own.mk' .PATH='.
> > /usr/src'
> >
> > *** Failed target: buildworld *** Failed command: cd /usr/src;
> > PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/pkg/bin make -m
> > /usr/src/share/mk -f Makefile.inc1 buildworld *** Error code 1
> >
> > Stop. make: stopped in /usr/src
>
>
>
>
More information about the Users
mailing list