[WiFi] Intel Centrino Advanced 6235 (error 45)

[Harald Brinkhof]

If you have an android phone you can turn on usb tethering and let it
wifi-connect to your network while you connect the phone to your laptop
with usb.

It'll create /dev/ue0 and you just need to issue

dhcpclient /dev/ue0

(as root)
To get everything working as an ad interim solution.

Hope it helps you out a bit.

On Thu, Oct 25, 2018, 10:09 Tobias Heilig <0x70b1 at web.de> wrote:

> hi guys,
>
> hope this is the right mailing list for my issue.
>
> i'm trying to boot dfly off my thinkpad t431s and obviously my wifi card is
> causing some problem:
>
>
> iwn0.pci3.pcib2.pci0.pcib0.acpi0.nexus0.root0
> iwn0: <Intel Centrino Advanced 6235> [tentative] mem 0xf0c00000-0xf0c01fff irq 1
> 7 at device 0.0 on pci3
> iwn0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xf0c00000
> iwn0: attempting to allocate 1 MSI vector (1 supported)
> alloc MSI intr 16 on cpu3
> iwn0: using IRQ 16 on cpu3 for MSI
> iwn0: adapter type id : 0x088f sub id :0x5260 rev 11 not supported (subdevice)
> iwn0: could not attach device, error 45
> panic: MSI rid 1 is not setup
> cpuid = 0
> Trace beginning at frame 0xffffffff819718e0
> panic() at panic+0x236 0xffffffff805f8666
> panic() at panic+0x236 0xffffffff805f8666
> pci_teardown_intr() at pci_teardown_intr+0x2a1 0xffffffff8085c601
> iwn_detach() at iwn_detach+0xb9 0xffffffff804fbf89
> iwn_attach() at iwn_attach+0x7cb 0xffffffff804fc85b
> device_doattach() at device_doattach+0x45 0xffffffff80622555
> Debugger("panic")
>
> CPU0 stopping CPUs: 0x0000000e
> stopped
> Stopped at    Debugger+0x7c:    movb    $0,0xe67a49(%rip)
>
> after physically removing the wifi card and trying again it booted without
> issues. Also, i checked /sys/dev/netif/iwn/if_iwn.c
> <https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/if_iwn.c>
> [1] and from what i can tell my wifi card is listed there and
> /sys/dev/netif/iwn/fw/iwn60002g/Makefile
> <https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/fw/iwn6000g2b/Makefile>
> [2] contains the correct Firmware for it. unluckily, i'm not experienced
> enough to troubleshoot further. any ideas on how to get it working? else,
> is there any particular wifi card which is known to work good under dflybsd
> 5.2.2 i can replace mine with? Thanks in advance. [1]
> https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/if_iwn.c
> [2]
> https://gitweb.dragonflybsd.org/dragonfly.git/blob/HEAD:/sys/dev/netif/iwn/fw/iwn6000g2b/Makefile
>
> --
> best regards,
>
> Tobi
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20181025/87c2ef4f/attachment.htm>