X on dell D630 / intel GM965 only shows black screen

Pedro Andres Aranda Gutierrez paaguti at gmail.com
Fri Mar 16 02:58:44 PDT 2018


Hi

mileage may vary but I was quite successful shutting off the Nvidia card
with my FreeBSD.

/PA

On 15 March 2018 at 10:44, karu.pruun <karu.pruun at gmail.com> wrote:

> Hello
>
> Can you try booting up and then manually loading the i915 driver as
> root or with sudo
>
> % sudo kldload i915
>
> does this load fine? You should see informational output in
> /var/log/messages. What does
>
> % pciconf -lv
>
> say about the vga devices, see the blocks starting with 'vga'. For
> instance, I have
>
> ---
> vgapci1 at pci0:0:2:0:    class=0x030000 card=0x00000000 chip=0x00468086
> rev=0x18 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Core Processor Integrated Graphics Controller'
>     class      = display
>     subclass   = VGA
> vgapci0 at pci0:1:0:0:    class=0x030000 card=0x00c7106b chip=0x0a2910de
> rev=0xa2 hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     device     = 'GT216M [GeForce GT 330M]'
>     class      = display
>     subclass   = VGA
> ---
>
> Can you try manually create a simple xorg.conf and set the intel
> driver as the only one with the pci address you get from pciconf (eg
> PCI:0:2:0)? In my xorg log I'm not seeing any other drivers loaded
> except intel and it works fine.
>
> Cheers
>
> Peeter
>
> --
>
>
>
>
>
>
> On Wed, Mar 14, 2018 at 6:32 PM,  <spuelmaschien at email.de> wrote:
> > MoinMoin,
> > having problems to get X running on a dell D630 / GM965 graphics laptop.
> > It just stays black and it's not killable but by switching it off.
> > I've tried intel and vesa drivers by specifying them explicitly
> > in /usr/local/etc/X11/xorg.conf.d
> > Vesa works, but is slooow.
> > Intel just hangs with  BusID "PCI:0:2:0" as well as with "PCI:0:2:1".
> > In Linux and OpenBSD modesetting drivers just work without any
> > modifications to the default xorg configuration.
> > Does anybody has a hint what to do ?
> >
> > Thanks, Tschuess,
> >      Sascha
> >
> > --> Xorg.0.log
> > [ 13790.928]
> > X.Org X Server 1.18.4
> > Release Date: 2016-07-19
> > [ 13790.928] X Protocol Version 11, Revision 0
> > [ 13790.928] Build Operating System: DragonFly 5.0-SYNTH x86_64
> > [ 13790.928] Current Operating System: DragonFly  5.0-RELEASE DragonFly
> v5.0.2-RELEASE #4: Su x86_64
> > [ 13790.931] Build Date: 31 December 2017  01:53:00AM
> > [ 13790.931]
> > [ 13790.931] Current version of pixman: 0.34.0
> > [ 13790.931]    Before reporting problems, check http://wiki.x.org
> >         to make sure that you have the latest version.
> > [ 13790.931] Markers: (--) probed, (**) from config file, (==) default
> setting,
> >         (++) from command line, (!!) notice, (II) informational,
> >         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > [ 13790.932] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 13
> 17:42:35 2018
> > [ 13790.932] (II) Loader magic: 0x615460
> > [ 13790.932] (II) Module ABI versions:
> > [ 13790.932]    X.Org ANSI C Emulation: 0.4
> > [ 13790.932]    X.Org Video Driver: 20.0
> > [ 13790.932]    X.Org XInput driver : 22.1
> > [ 13790.932]    X.Org Server Extension : 9.0
> > [ 13790.932] (--) PCI:*(0:0:2:0) 8086:2a02:1028:01f9 rev 12, Mem @
> 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @
> 0x????????/65536
> > [ 13790.932] (--) PCI: (0:0:2:1) 8086:2a03:1028:01f9 rev 12, Mem @
> 0xf6f00000/1048576
> > [ 13790.932] (==) Using default built-in configuration (30 lines)
> > [ 13790.932] (==) --- Start of built-in configuration ---
> > [ 13790.932]    Section "Device"
> > [ 13790.932]            Identifier      "Builtin Default intel Device 0"
> > [ 13790.932]            Driver  "intel"
> > [ 13790.932]    EndSection
> > [ 13790.932]    Section "Screen"
> > [ 13790.932]            Identifier      "Builtin Default intel Screen 0"
> > [ 13790.932]            Device  "Builtin Default intel Device 0"
> > [ 13790.932]    EndSection
> > [ 13790.932]    Section "Device"
> > [ 13790.932]            Identifier      "Builtin Default modesetting
> Device 0"
> > [ 13790.932]            Driver  "modesetting"
> > [ 13790.932]    EndSection
> > [ 13790.932]    Section "Screen"
> > [ 13790.932]            Identifier      "Builtin Default modesetting
> Screen 0"
> > [ 13790.932]            Device  "Builtin Default modesetting Device 0"
> > [ 13790.932]    EndSection
> > [ 13790.932]    Section "Device"
> > [ 13790.932]            Identifier      "Builtin Default vesa Device 0"
> > [ 13790.932]            Driver  "vesa"
> > [ 13790.932]    EndSection
> > [ 13790.932]    Section "Screen"
> > [ 13790.932]            Identifier      "Builtin Default vesa Screen 0"
> > [ 13790.932]            Device  "Builtin Default vesa Device 0"
> > [ 13790.932]    EndSection
> > [ 13790.932]    Section "ServerLayout"
> > [ 13790.932]            Identifier      "Builtin Default Layout"
> > [ 13790.932]            Screen  "Builtin Default intel Screen 0"
> > [ 13790.932]            Screen  "Builtin Default modesetting Screen 0"
> > [ 13790.932]            Screen  "Builtin Default vesa Screen 0"
> > [ 13790.932]    EndSection
> > [ 13790.932] (==) --- End of built-in configuration ---
> > [ 13790.932] (==) ServerLayout "Builtin Default Layout"
> > [ 13790.932] (**) |-->Screen "Builtin Default intel Screen 0" (0)
> > [ 13790.932] (**) |   |-->Monitor "<default monitor>"
> > [ 13790.933] (**) |   |-->Device "Builtin Default intel Device 0"
> > [ 13790.933] (==) No monitor specified for screen "Builtin Default intel
> Screen 0".
> >         Using a default monitor configuration.
> > [ 13790.933] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
> > [ 13790.933] (**) |   |-->Monitor "<default monitor>"
> > [ 13790.933] (**) |   |-->Device "Builtin Default modesetting Device 0"
> > [ 13790.933] (==) No monitor specified for screen "Builtin Default
> modesetting Screen 0".
> >         Using a default monitor configuration.
> > [ 13790.933] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
> > [ 13790.933] (**) |   |-->Monitor "<default monitor>"
> > [ 13790.933] (**) |   |-->Device "Builtin Default vesa Device 0"
> > [ 13790.933] (==) No monitor specified for screen "Builtin Default vesa
> Screen 0".
> >         Using a default monitor configuration.
> > [ 13790.933] (==) Automatically adding devices
> > [ 13790.933] (==) Automatically enabling devices
> > [ 13790.933] (==) Not automatically adding GPU devices
> > [ 13790.933] (==) Max clients allowed: 256, resource mask: 0x1fffff
> > [ 13790.933] (==) FontPath set to:
> >         /usr/local/share/fonts/misc/,
> >         /usr/local/share/fonts/TTF/,
> >         /usr/local/share/fonts/OTF/,
> >         /usr/local/share/fonts/Type1/,
> >         /usr/local/share/fonts/100dpi/,
> >         /usr/local/share/fonts/75dpi/
> > [ 13790.933] (==) ModulePath set to "/usr/local/lib/xorg/modules"
> > [ 13790.933] (II) The server relies on devd to provide the list of input
> devices.
> >         If no devices become available, reconfigure devd or disable
> AutoAddDevices.
> > [ 13790.933] (II) LoadModule: "glx"
> > [ 13790.934] (II) Loading /usr/local/lib/xorg/modules/
> extensions/libglx.so
> > [ 13790.946] (II) Module glx: vendor="X.Org Foundation"
> > [ 13790.946]    compiled for 1.18.4, module version = 1.0.0
> > [ 13790.946]    ABI class: X.Org Server Extension, version 9.0
> > [ 13790.946] (==) AIGLX enabled
> > [ 13790.946] (II) LoadModule: "intel"
> > [ 13790.946] (II) Loading /usr/local/lib/xorg/modules/
> drivers/intel_drv.so
> > [ 13790.948] (II) Module intel: vendor="X.Org Foundation"
> > [ 13790.948]    compiled for 1.18.4, module version = 2.99.917
> > [ 13790.948]    Module class: X.Org Video Driver
> > [ 13790.948]    ABI class: X.Org Video Driver, version 20.0
> > [ 13790.948] (II) LoadModule: "modesetting"
> > [ 13790.948] (II) Loading /usr/local/lib/xorg/modules/
> drivers/modesetting_drv.so
> > [ 13790.948] (II) Module modesetting: vendor="X.Org Foundation"
> > [ 13790.948]    compiled for 1.18.4, module version = 1.18.4
> > [ 13790.948]    Module class: X.Org Video Driver
> > [ 13790.948]    ABI class: X.Org Video Driver, version 20.0
> > [ 13790.948] (II) LoadModule: "vesa"
> > [ 13790.948] (II) Loading /usr/local/lib/xorg/modules/
> drivers/vesa_drv.so
> > [ 13790.949] (II) Module vesa: vendor="X.Org Foundation"
> > [ 13790.949]    compiled for 1.18.4, module version = 2.3.4
> > [ 13790.949]    Module class: X.Org Video Driver
> > [ 13790.949]    ABI class: X.Org Video Driver, version 20.0
> > [ 13790.949] (II) intel: Driver for Intel(R) Integrated Graphics
> Chipsets:
> >         i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM,
> 865G,
> >         915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
> >         Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35,
> Q33,
> >         GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
> > [ 13790.949] (II) intel: Driver for Intel(R) HD Graphics
> > [ 13790.949] (II) intel: Driver for Intel(R) Iris(TM) Graphics
> > [ 13790.949] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
> > [ 13790.949] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> > [ 13790.949] (II) VESA: driver for VESA chipsets: vesa
> > [ 13790.949] (--) Using syscons driver with X support (version 2.0)
> > [ 13790.949] (--) using VT number 9
> >
>



-- 
Fragen sind nicht da um beantwortet zu werden,
Fragen sind da um gestellet zu werden
Georg Kreisler
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20180316/0fa96198/attachment-0003.htm>


More information about the Users mailing list