device lacks SMART capability

Predrag Punosevac punosevac72 at gmail.com
Sat Sep 23 13:29:30 PDT 2017


Matthew Dillon <dillon at backplane.com> wrote:

> It's probably trying to use IDE ioctls instead of SCSI.  Try this:
> 

Right on money! See below. What should I put in smartd.conf to force 

-d s 

check?

Best,
Predrag


smartctl 6.5 2016-05-07 r4318 [DragonFly 4.8-RELEASE x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TS32GMTS400
Serial Number:    B620550018
Firmware Version: 20140516
User Capacity:    32,017,047,552 bytes [32.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Sep 23 16:27:02 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x71) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      -       0
  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      -       343
 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      -       58
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      -       23
194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      -       45
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      -       37342
196 Reallocated_Event_Count 0x0000   100   100   016    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age   Offline      -       0
160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       43
163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       2
164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       305299
165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       345
166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       243
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       301
168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3000
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       92
232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      -       100
177 Wear_Leveling_Count     0x0000   100   100   050    Old_age   Offline      -       596
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       161066
242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      -       20776

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        60         -
# 2  Short offline       Completed without error       00%        59         -
# 3  Short offline       Completed without error       00%        59         -
# 4  Short offline       Completed without error       00%        58         -
# 5  Extended offline    Completed without error       00%        57         -
# 6  Short offline       Completed without error       00%        56         -
# 7  Short offline       Completed without error       00%        55         -
# 8  Short offline       Completed without error       00%        54         -
# 9  Short offline       Completed without error       00%        53         -
#10  Short offline       Completed without error       00%        53         -
#11  Short offline       Completed without error       00%        52         -
#12  Short offline       Completed without error       00%        51         -
#13  Extended offline    Completed without error       00%        50         -
#14  Short offline       Completed without error       00%        49         -
#15  Short offline       Completed without error       00%        48         -
#16  Short offline       Completed without error       00%        47         -
#17  Short offline       Completed without error       00%        47         -
#18  Short offline       Completed without error       00%        46         -
#19  Short offline       Completed without error       00%        45         -
#20  Short offline       Completed without error       00%        44         -
#21  Extended offline    Completed without error       00%        43         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



> Try smartctl -d sat -a /dev/<blah>
> 
> -Matt
> ???



More information about the Users mailing list