device lacks SMART capability
Predrag Punosevac
punosevac72 at gmail.com
Sat Sep 23 13:29:30 PDT 2017
Matthew Dillon <dillon at backplane.com> wrote:
> It's probably trying to use IDE ioctls instead of SCSI. Try this:
>
Right on money! See below. What should I put in smartd.conf to force
-d s
check?
Best,
Predrag
smartctl 6.5 2016-05-07 r4318 [DragonFly 4.8-RELEASE x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TS32GMTS400
Serial Number: B620550018
Firmware Version: 20140516
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Sep 23 16:27:02 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 343
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 58
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 23
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 45
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 37342
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 43
163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2
164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 305299
165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 345
166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 243
167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 301
168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000
169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 92
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 596
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 161066
242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 20776
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 60 -
# 2 Short offline Completed without error 00% 59 -
# 3 Short offline Completed without error 00% 59 -
# 4 Short offline Completed without error 00% 58 -
# 5 Extended offline Completed without error 00% 57 -
# 6 Short offline Completed without error 00% 56 -
# 7 Short offline Completed without error 00% 55 -
# 8 Short offline Completed without error 00% 54 -
# 9 Short offline Completed without error 00% 53 -
#10 Short offline Completed without error 00% 53 -
#11 Short offline Completed without error 00% 52 -
#12 Short offline Completed without error 00% 51 -
#13 Extended offline Completed without error 00% 50 -
#14 Short offline Completed without error 00% 49 -
#15 Short offline Completed without error 00% 48 -
#16 Short offline Completed without error 00% 47 -
#17 Short offline Completed without error 00% 47 -
#18 Short offline Completed without error 00% 46 -
#19 Short offline Completed without error 00% 45 -
#20 Short offline Completed without error 00% 44 -
#21 Extended offline Completed without error 00% 43 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
> Try smartctl -d sat -a /dev/<blah>
>
> -Matt
> ???
More information about the Users
mailing list