4.8.0 to 4.8.1 update requirements

[Antonio Olivares]

On Wed, Aug 16, 2017 at 10:20 PM, Sepherosa Ziehau <sepherosa at gmail.com> wrote:
> Checkout the source code in /usr/src
>
> cd /usr/src
> make -j `sysctl -n hw.ncpu` buildworld && make -j `sysctl -n hw.ncpu`
> buildkernel
> make installkernel
> shutdown -r now
>
> # after reboot
> cd /usr/src
> make installworld
> make upgrade
> reboot
>
> # after reboot
> pkg update
> pkg upgrade -y # or pkg upgrade -fy
>
> Thanks,
> sephe
>
>
> On Thu, Aug 17, 2017 at 11:11 AM, Antonio Olivares
> <olivares14031 at gmail.com> wrote:
>> Dear kind DragonflyBSD users,
>>
>> I have a machine running 4.8.0 in a small 74.? GB hard drive with hammer.  I
>> ignored some warnings that installing to small hard drives could jeopardize
>> some operations.  In light of avoiding problems, how can I check if it is
>> recommended to run
>> #make ...
>> I.e, the commands needed to upgrade system.
>> Or it would be preferred to pop in another disk and install from 4.8.1
>> installation media.?
>>
>> Thanks for advice provided.  I have not updated the machine since last days
>> of may of this year.  Now I have to get back to work and I would like to be
>> caught up with new release and new packages.
>>
>> Best Regards,
>>
>>
>> Antonio
>
>
>
> --
> Tomorrow Will Never Die

I got a chance to try to update one of my machines, and I am running
into a problem.  I believe that somehow someone is blocking access
firewall??

see below:

eightcoreF104# ls
COPYRIGHT       etc             root
bin             home            sbin
boot            lib             sys
build           libexec         tmp
compat          mnt             usr
dev             opt             var
entropy         proc
eightcoreF104# cd /usr/
eightcoreF104# ls
Makefile        include         obj
bin             lib             sbin
distfiles       libdata         share
dports          libexec
games           local
eightcoreF104# cd src
src: No such file or directory.
eightcoreF104# make src-create
If problems occur you may have to rm -rf src and try again.

Initialized empty Git repository in /usr/src/.git/
cd /usr/src && git fetch origin
fatal: read error: Connection reset by peer
*** Error code 128

Stop.
make: stopped in /usr
eightcoreF104# rm -rf src
recursively remove src? y
eightcoreF104# make src-create
If problems occur you may have to rm -rf src and try again.

Initialized empty Git repository in /usr/src/.git/
cd /usr/src && git fetch origin
fatal: read error: Connection reset by peer
*** Error code 128

Stop.
make: stopped in /usr
eightcoreF104# git clone git://git.dragonflybsd.org/dragonfly.git dragonfl
Cloning into 'dragonfl'...
fatal: read error: Connection reset by peer
eightcoreF104# git clone git://git.dragonflybsd.org/dragonfly.git dragonfly
Cloning into 'dragonfly'...
fatal: read error: Connection reset by peer
eightcoreF104# ifconfig -a
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet6 fe80::beee:7bff:fe5a:718a%re0 prefixlen 64 scopeid 0x1
        inet 10.155.142.84 netmask 0xffffff00 broadcast 10.155.142.255
        ether bc:ee:7b:5a:71:8a
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        options=43<RXCSUM,TXCSUM,RSS>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
eightcoreF104#
eightcoreF104# uname -a
DragonFly eightcoreF104 4.8-RELEASE DragonFly v4.8.0-RELEASE #4: Sun
Mar 26 20:55:22 EDT 2017
root at www.shiningsilence.com:/usr/obj/home/justin/release/4_8/sys/X86_64_GENERIC
 x86_64
eightcoreF104#

I have 4.8.1 on a dvd, but I wanted to use src :(
I will have to wait to see what is going on.

Best Regards && Thanks for helping


Antonio