DragonFly gets stuck booting Toshiba Portege Z30-C-13E
Roman Neuhauser
neuhauser at sigpipe.cz
Sat Sep 10 03:08:42 PDT 2016
hola,
tldr: Linux, OpenBSD ok; DragonFly, FreeBSD fail on Toshiba Z30-C-13E.
v4.6.0, v4.7.0.373.ged27c images get stuck booting at (transcribed):
ACPI: DMAR 0x00000000D92B7000 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: FPDT 0x00000000D92FD000 000044 (v01 TOSHIB A009F 00000000 00000000)
ACPI: ASF! 0x00000000D92B5000 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x00000000D92B4000 000038 (v01 INTEL EDK2 00000002 01000013)
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
acpi0: <TOSHIB A009F> on motherboard
ACPI: Executed 19 blocks of module-level executable AML code
ACPI: 10 ACPI AML table successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 24000000
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
and i got a panic after loading acpi_toshiba.ko:
OK load kernel
kernel text=0x9c60a8 data=0xeeaa440 syms=[0x8+0xeb938+0x8+0xc6fc5]
OK load acpi_toshiba.ko
acpi_toshiba.ko size 0x4240 at 0x1e23000
loading required module 'acpi'
acpi.ko size 0xcac18 at 0x1e28000
OK boot -p
ehci.ko size 0xcc58 at 0x1ef3000
xhci.ko size 0xd2f0 at 0x1f00000
Copyright (c) 2003-2016 The DragonFly Project.
<pause; press any key to proceed to next line or '.' to end pause mode>panic with 1 spinlocks held
panic: lockmgr atkbd from 0xffffffff8150cb50: called from interrupt, ipi, or hard code section
cpuid = 0
Trace beginning at frame 0xffffffff8150ca30
(null)() at 0xffffffff8060776a 0xffffffff8060776a
(null)() at 0xffffffff8060776a 0xffffffff8060776a
(null)() at 0xffffffff805f74dc 0xffffffff805f74dc
(null)() at 0xffffffff809d2ab5 0xffffffff809d2ab5
(null)() at 0xffffffff809dfe7f 0xffffffff809dfe7f
(null)() at 0xffffffff809dffa9 0xffffffff809dffa9
Debugger("panic")
CPU0 stopping CPUs: 0x00000000
stopped
Stopped at 0xffffffff809f8650: movb $0,0xb0ef15(%rip)
db>
OpenBSD-6.0 installed happily, as did VoidLinux-20160420
(dmesg from both attached); haven't tried anything else.
i'd prefer to run DragonFly or FreeBSD on this laptop.
what can i do to help make it happen?
--
roman
-------------- next part --------------
[ 0.000000] Linux version 4.5.2_1 (xbps-builder at build.voidlinux.eu) (gcc version 4.9.3 (GCC) ) #1 SMP PREEMPT Wed Apr 20 08:16:49 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz initrd=/boot/initrd root=live:CDLABEL=VOID_LIVE init=/sbin/init ro rd.luks=0 rd.md=0 rd.dm=0 loglevel=4 vconsole.unicode=1 vconsole.keymap=us locale.LANG=en_US.UTF-8
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a4e2efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a4e2f000-0x00000000a4e2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a4e30000-0x00000000a5153fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a5154000-0x00000000a5154fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a5155000-0x00000000d80cbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d80cc000-0x00000000d80ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d80cd000-0x00000000d80f6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d80f7000-0x00000000d821efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d821f000-0x00000000d9159fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d915a000-0x00000000d9299fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d929a000-0x00000000d92fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d92ff000-0x00000000d92fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9300000-0x00000000dbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000222ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: TOSHIBA PORTEGE Z30-C/PORTEGE Z30-C, BIOS Version 5.60 04/21/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x223000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 00DA000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00D9800000 mask 7FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xd9300 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01b66000, 0x01b66fff] PGTABLE
[ 0.000000] BRK [0x01b67000, 0x01b67fff] PGTABLE
[ 0.000000] BRK [0x01b68000, 0x01b68fff] PGTABLE
[ 0.000000] BRK [0x01b69000, 0x01b69fff] PGTABLE
[ 0.000000] BRK [0x01b6a000, 0x01b6afff] PGTABLE
[ 0.000000] BRK [0x01b6b000, 0x01b6bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7e560000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0030 000024 (v02 TOSHIB)
[ 0.000000] ACPI: XSDT 0x00000000D92B6188 0000E4 (v01 TOSHIB A009F 20160115 01000013)
[ 0.000000] ACPI: FACP 0x00000000D92F5000 0000F4 (v05 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000D92C4000 02AFE3 (v02 TOSHIB A009F 20160115 INTL 20141107)
[ 0.000000] ACPI: FACS 0x00000000D9281000 000040
[ 0.000000] ACPI: UEFI 0x00000000D9298000 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000D92F7000 005548 (v02 SaSsdt SaSsdt 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x00000000D92F6000 0005C5 (v02 Intel PerfTune 00001000 INTL 20141107)
[ 0.000000] ACPI: HPET 0x00000000D92F4000 000038 (v01 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: LPIT 0x00000000D92F3000 000094 (v01 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: APIC 0x00000000D92F2000 0000BC (v03 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000D92F1000 00003C (v01 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: MSDM 0x00000000D92F0000 000055 (v03 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: SLIC 0x00000000D92EF000 000176 (v01 TOSHIB A009F 20160115 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000D92C3000 000248 (v02 TOSHIB sensrhub 00000000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x00000000D92C2000 0002D4 (v01 TOSHIB EInkApp 00000000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x00000000D92BF000 002BAE (v02 TOSHIB PtidDevc 00001000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x00000000D92BE000 0001D2 (v02 TOSHIB Sata0Ide 00001000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x00000000D92BD000 000B49 (v02 TOSHIB UsbCTabl 00001000 INTL 20141107)
[ 0.000000] ACPI: DBGP 0x00000000D92BC000 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000D92BB000 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000D92BA000 0006C7 (v02 TOSHIB SYSTEM-2 00001000 INTL 20141107)
[ 0.000000] ACPI: BOOT 0x00000000D92B9000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000D92B8000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20141107)
[ 0.000000] ACPI: DMAR 0x00000000D92B7000 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: FPDT 0x00000000D92FD000 000044 (v01 TOSHIB A009F 00000000 00000000)
[ 0.000000] ACPI: ASF! 0x00000000D92B5000 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: BGRT 0x00000000D92B4000 000038 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000222ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x222ff7000-0x222ffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000222ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a4e2efff]
[ 0.000000] node 0: [mem 0x00000000a4e30000-0x00000000a5153fff]
[ 0.000000] node 0: [mem 0x00000000a5155000-0x00000000d80cbfff]
[ 0.000000] node 0: [mem 0x00000000d80f7000-0x00000000d821efff]
[ 0.000000] node 0: [mem 0x00000000d92ff000-0x00000000d92fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000222ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000222ffffff]
[ 0.000000] On node 0 totalpages: 2077071
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13768 pages used for memmap
[ 0.000000] DMA32 zone: 881139 pages, LIFO batch:31
[ 0.000000] Normal zone: 18624 pages used for memmap
[ 0.000000] Normal zone: 1191936 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xda000000-0xdbffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa4e2f000-0xa4e2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa5154000-0xa5154fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd80cc000-0xd80ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd80cd000-0xd80f6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd821f000-0xd9159fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd915a000-0xd9299fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd929a000-0xd92fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9300000-0xdbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xdc000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880222c00000 s93720 r8192 d29160 u262144
[ 0.000000] pcpu-alloc: s93720 r8192 d29160 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044594
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz initrd=/boot/initrd root=live:CDLABEL=VOID_LIVE init=/sbin/init ro rd.luks=0 rd.md=0 rd.dm=0 loglevel=4 vconsole.unicode=1 vconsole.keymap=us locale.LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8068756K/8308284K available (6026K kernel code, 1049K rwdata, 1948K rodata, 1256K init, 1136K bss, 239528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:4352 nr_irqs:2048 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2592.235 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.47 BogoMIPS (lpj=2592235)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000011] ACPI: Core revision 20160108
[ 0.045145] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.045165] Security Framework initialized
[ 0.045166] Yama: becoming mindful.
[ 0.045630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.047290] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.048039] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.048047] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.048266] CPU: Physical Processor ID: 0
[ 0.048267] CPU: Processor Core ID: 0
[ 0.048270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.048271] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.048276] mce: CPU supports 8 MCE banks
[ 0.048288] CPU0: Thermal monitoring handled by SMI
[ 0.048296] process: using mwait in idle threads
[ 0.048298] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.048299] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.048657] Freeing SMP alternatives memory: 24K (ffffffff81a42000 - ffffffff81a48000)
[ 0.053193] ftrace: allocating 24744 entries in 97 pages
[ 0.062372] DMAR: Host address width 39
[ 0.062374] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.062379] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.062380] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.062383] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.062385] DMAR: RMRR base: 0x000000d8eff000 end: 0x000000d8f1efff
[ 0.062386] DMAR: RMRR base: 0x000000d9800000 end: 0x000000dbffffff
[ 0.062388] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.062389] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.062390] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.062390] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.063861] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.063862] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.068011] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078020] TSC deadline timer enabled
[ 0.078025] smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.078043] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[ 0.078071] ... version: 4
[ 0.078072] ... bit width: 48
[ 0.078072] ... generic registers: 4
[ 0.078073] ... value mask: 0000ffffffffffff
[ 0.078074] ... max period: 0000ffffffffffff
[ 0.078075] ... fixed-purpose events: 3
[ 0.078075] ... event mask: 000000070000000f
[ 0.087157] x86: Booting SMP configuration:
[ 0.087158] .... node #0, CPUs: #1
[ 0.087559] CPU1: Thermal monitoring handled by SMI
[ 0.089705] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.092675] #2
[ 0.093197] CPU2: Thermal monitoring handled by SMI
[ 0.098316] #3
[ 0.098815] CPU3: Thermal monitoring handled by SMI
[ 0.100880] x86: Booted up 1 node, 4 CPUs
[ 0.100883] smpboot: Total of 4 processors activated (20737.88 BogoMIPS)
[ 0.105264] devtmpfs: initialized
[ 0.107309] PM: Registering ACPI NVS region [mem 0xd80cc000-0xd80ccfff] (4096 bytes)
[ 0.107311] PM: Registering ACPI NVS region [mem 0xd915a000-0xd9299fff] (1310720 bytes)
[ 0.107384] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.107435] pinctrl core: initialized pinctrl subsystem
[ 0.107591] NET: Registered protocol family 16
[ 0.112167] cpuidle: using governor ladder
[ 0.116191] cpuidle: using governor menu
[ 0.116235] Simple Boot Flag at 0x47 set to 0x1
[ 0.116281] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116283] ACPI: bus type PCI registered
[ 0.116284] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116352] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.116354] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.116358] PCI: Using configuration type 1 for base access
[ 0.120283] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.120284] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.120477] ACPI: Added _OSI(Module Device)
[ 0.120478] ACPI: Added _OSI(Processor Device)
[ 0.120479] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.120480] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.125619] ACPI: Executed 19 blocks of module-level executable AML code
[ 0.132425] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.136012] ACPI: Dynamic OEM Table Load:
[ 0.136021] ACPI: SSDT 0xFFFF88021888F000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
[ 0.137022] ACPI: Dynamic OEM Table Load:
[ 0.137029] ACPI: SSDT 0xFFFF880218893800 000771 (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
[ 0.138518] ACPI: Dynamic OEM Table Load:
[ 0.138525] ACPI: SSDT 0xFFFF880218894000 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
[ 0.139698] ACPI: Dynamic OEM Table Load:
[ 0.139704] ACPI: SSDT 0xFFFF8802188AEC00 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
[ 0.142178] ACPI: Interpreter enabled
[ 0.142222] ACPI: (supports S0 S3 S4 S5)
[ 0.142223] ACPI: Using IOAPIC for interrupt routing
[ 0.142257] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.142734] ACPI: Power Resource [PG00] (on)
[ 0.143035] ACPI: Power Resource [PG01] (on)
[ 0.143321] ACPI: Power Resource [PG02] (on)
[ 0.150005] ACPI: Power Resource [WRST] (off)
[ 0.150194] ACPI: Power Resource [WRST] (off)
[ 0.150708] ACPI: Power Resource [WRST] (off)
[ 0.150893] ACPI: Power Resource [WRST] (off)
[ 0.151075] ACPI: Power Resource [WRST] (off)
[ 0.151258] ACPI: Power Resource [WRST] (off)
[ 0.151441] ACPI: Power Resource [WRST] (off)
[ 0.151628] ACPI: Power Resource [WRST] (off)
[ 0.151812] ACPI: Power Resource [WRST] (off)
[ 0.151995] ACPI: Power Resource [WRST] (off)
[ 0.152179] ACPI: Power Resource [WRST] (off)
[ 0.152363] ACPI: Power Resource [WRST] (off)
[ 0.152517] ACPI: Power Resource [WRST] (off)
[ 0.152674] ACPI: Power Resource [WRST] (off)
[ 0.152830] ACPI: Power Resource [WRST] (off)
[ 0.152984] ACPI: Power Resource [WRST] (off)
[ 0.153138] ACPI: Power Resource [WRST] (off)
[ 0.153291] ACPI: Power Resource [WRST] (off)
[ 0.153447] ACPI: Power Resource [WRST] (off)
[ 0.153603] ACPI: Power Resource [WRST] (off)
[ 0.157333] ACPI: Power Resource [PDOC] (off)
[ 0.157383] acpi PNP0A05:05: ACPI dock station (docks/bays count: 1)
[ 0.159906] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.159912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.162324] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.162326] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.164029] PCI host bridge to bus 0000:00
[ 0.164032] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.164033] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.164035] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.164036] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xf7ffffff window]
[ 0.164037] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.164038] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.164045] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.164867] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.164875] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[ 0.164881] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.164885] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.165605] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.165698] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
[ 0.165763] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.166414] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.166448] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.166467] pci 0000:00:14.2: reg 0x10: [mem 0xf124a000-0xf124afff 64bit]
[ 0.167171] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.167190] pci 0000:00:16.0: reg 0x10: [mem 0xf124b000-0xf124bfff 64bit]
[ 0.167254] pci 0000:00:16.0: PME# supported from D3hot
[ 0.167932] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.167947] pci 0000:00:17.0: reg 0x10: [mem 0xf1248000-0xf1249fff]
[ 0.167955] pci 0000:00:17.0: reg 0x14: [mem 0xf124e000-0xf124e0ff]
[ 0.167963] pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
[ 0.167971] pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.167979] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.167987] pci 0000:00:17.0: reg 0x24: [mem 0xf124c000-0xf124c7ff]
[ 0.168028] pci 0000:00:17.0: PME# supported from D3hot
[ 0.168698] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400
[ 0.168759] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.169441] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[ 0.169506] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.170208] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.170963] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.170974] pci 0000:00:1f.2: reg 0x10: [mem 0xf1244000-0xf1247fff]
[ 0.171683] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.171708] pci 0000:00:1f.3: reg 0x10: [mem 0xf1240000-0xf1243fff 64bit]
[ 0.171741] pci 0000:00:1f.3: reg 0x20: [mem 0xf1230000-0xf123ffff 64bit]
[ 0.171792] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.172451] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.172486] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.172533] pci 0000:00:1f.4: reg 0x10: [mem 0xf124d000-0xf124d0ff 64bit]
[ 0.172602] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.173328] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
[ 0.173349] pci 0000:00:1f.6: reg 0x10: [mem 0xf1200000-0xf121ffff]
[ 0.173452] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.174086] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.174164] pci 0000:01:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.174183] pci 0000:01:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
[ 0.174314] pci 0000:01:00.0: supports D1 D2
[ 0.174315] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.175632] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.175636] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.175929] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.176011] pci 0000:02:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit]
[ 0.176291] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.179250] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.179254] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.180784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.180828] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.180870] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.180911] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.180952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.180993] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.181035] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.181078] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.181447] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.181534] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.181536] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.181538] vgaarb: loaded
[ 0.181539] vgaarb: bridge control possible 0000:00:02.0
[ 0.181616] pps_core: LinuxPPS API ver. 1 registered
[ 0.181617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.181620] PTP clock support registered
[ 0.181679] PCI: Using ACPI for IRQ routing
[ 0.188463] PCI: pci_cache_line_size set to 64 bytes
[ 0.188960] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.188961] e820: reserve RAM buffer [mem 0xa4e2f000-0xa7ffffff]
[ 0.188962] e820: reserve RAM buffer [mem 0xa5154000-0xa7ffffff]
[ 0.188963] e820: reserve RAM buffer [mem 0xd80cc000-0xdbffffff]
[ 0.188965] e820: reserve RAM buffer [mem 0xd821f000-0xdbffffff]
[ 0.188966] e820: reserve RAM buffer [mem 0xd9300000-0xdbffffff]
[ 0.188967] e820: reserve RAM buffer [mem 0x223000000-0x223ffffff]
[ 0.189131] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.189135] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.191180] clocksource: Switched to clocksource hpet
[ 0.195681] VFS: Disk quotas dquot_6.6.0
[ 0.195700] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.195796] pnp: PnP ACPI init
[ 0.195902] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.195904] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.195906] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.195907] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.195908] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.195910] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.195911] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.195913] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196196] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.196198] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196320] system 00:02: [io 0x01e0-0x01e7] has been reserved
[ 0.196321] system 00:02: [io 0x0680-0x06ff] has been reserved
[ 0.196323] system 00:02: [io 0xffff] has been reserved
[ 0.196324] system 00:02: [io 0xffff] has been reserved
[ 0.196325] system 00:02: [io 0xffff] has been reserved
[ 0.196326] system 00:02: [io 0x1800-0x18fe] could not be reserved
[ 0.196328] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.196329] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196416] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.196444] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.196446] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.196550] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.196577] pnp 00:06: Plug and Play ACPI device, IDs TOS020c PNP0f03 (active)
[ 0.197616] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.197618] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.197619] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.197621] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198080] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.198082] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.198083] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.198084] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.198086] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.198087] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.198088] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.198090] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.198091] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.198093] system 00:08: [mem 0xdc000000-0xdc01ffff] has been reserved
[ 0.198094] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198667] pnp: PnP ACPI: found 9 devices
[ 0.206836] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.206854] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.206859] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.206864] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.206868] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.206875] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.206876] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.206877] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.206878] pci_bus 0000:00: resource 7 [mem 0xdc000000-0xf7ffffff window]
[ 0.206880] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.206881] pci_bus 0000:01: resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.206882] pci_bus 0000:02: resource 1 [mem 0xf1000000-0xf10fffff]
[ 0.206906] NET: Registered protocol family 2
[ 0.207052] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.207211] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.207381] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.207407] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.207436] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.207490] NET: Registered protocol family 1
[ 0.207502] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.207952] PCI: CLS 0 bytes, default 64
[ 0.207986] Unpacking initramfs...
[ 2.559296] Freeing initrd memory: 27264K (ffff88007e560000 - ffff880080000000)
[ 2.559319] DMAR: No ATSR found
[ 2.559427] DMAR: dmar0: Using Queued invalidation
[ 2.559547] DMAR: dmar1: Using Queued invalidation
[ 2.559552] DMAR: Setting RMRR:
[ 2.559579] DMAR: Setting identity map for device 0000:00:02.0 [0xd9800000 - 0xdbffffff]
[ 2.559590] DMAR: Setting identity map for device 0000:00:14.0 [0xd8eff000 - 0xd8f1efff]
[ 2.559596] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 2.559601] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 2.559637] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 2.559682] iommu: Adding device 0000:00:00.0 to group 0
[ 2.559689] iommu: Adding device 0000:00:02.0 to group 1
[ 2.559700] iommu: Adding device 0000:00:14.0 to group 2
[ 2.559705] iommu: Adding device 0000:00:14.2 to group 2
[ 2.559713] iommu: Adding device 0000:00:16.0 to group 3
[ 2.559719] iommu: Adding device 0000:00:17.0 to group 4
[ 2.559734] iommu: Adding device 0000:00:1c.0 to group 5
[ 2.559745] iommu: Adding device 0000:00:1c.2 to group 5
[ 2.559759] iommu: Adding device 0000:00:1f.0 to group 6
[ 2.559765] iommu: Adding device 0000:00:1f.2 to group 6
[ 2.559770] iommu: Adding device 0000:00:1f.3 to group 6
[ 2.559777] iommu: Adding device 0000:00:1f.4 to group 6
[ 2.559783] iommu: Adding device 0000:00:1f.6 to group 6
[ 2.559789] iommu: Adding device 0000:01:00.0 to group 5
[ 2.559796] iommu: Adding device 0000:02:00.0 to group 5
[ 2.561492] Scanning for low memory corruption every 60 seconds
[ 2.561728] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 2.561763] audit: initializing netlink subsys (disabled)
[ 2.561774] audit: type=2000 audit(1473508708.552:1): initialized
[ 2.562024] Initialise system trusted keyring
[ 2.563494] zbud: loaded
[ 2.564632] Key type asymmetric registered
[ 2.564635] Asymmetric key parser 'x509' registered
[ 2.564663] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.564729] io scheduler noop registered
[ 2.564731] io scheduler deadline registered
[ 2.564753] io scheduler cfq registered (default)
[ 2.565263] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 2.565285] aer 0000:00:1c.2:pcie02: service driver aer loaded
[ 2.565297] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.565298] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.565301] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.565307] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 2.565308] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.565311] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 2.565315] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.565320] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.565334] intel_idle: MWAIT substates: 0x11142120
[ 2.565335] intel_idle: v0.4.1 model 0x4E
[ 2.565336] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.565569] GHES: HEST is not enabled!
[ 2.565650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.566538] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend at alpha.franken.de
[ 2.566546] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.566547] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.566558] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.566559] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.566569] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.566570] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.566706] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.862062] e1000e 0000:00:1f.6 eth0: registered PHC clock
[ 2.862065] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) ec:21:e5:09:3e:20
[ 2.862067] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 2.862118] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 2.862151] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.864114] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.864137] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.864388] mousedev: PS/2 mouse device common for all mice
[ 2.864455] rtc_cmos 00:03: RTC can wake from S4
[ 2.865111] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.865190] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.865203] Intel P-state driver initializing.
[ 2.865205] intel_pstate: HWP enabled
[ 2.865618] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.865801] NET: Registered protocol family 10
[ 2.866134] NET: Registered protocol family 17
[ 2.866145] Key type dns_resolver registered
[ 2.866290] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x88
[ 2.866337] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x88
[ 2.866356] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x88
[ 2.866412] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x88
[ 2.866499] microcode: Microcode Update Driver: v2.01 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 2.866763] registered taskstats version 1
[ 2.866773] Loading compiled-in X.509 certificates
[ 2.866785] zswap: loaded using pool lzo/zbud
[ 2.868131] rtc_cmos 00:03: setting system clock to 2016-09-10 11:58:29 UTC (1473508709)
[ 2.869283] Freeing unused kernel memory: 1256K (ffffffff81908000 - ffffffff81a42000)
[ 2.869285] Write protecting the kernel read-only data: 8192k
[ 2.869562] Freeing unused kernel memory: 108K (ffff8800015e5000 - ffff880001600000)
[ 2.869787] Freeing unused kernel memory: 100K (ffff8800017e7000 - ffff880001800000)
[ 2.873704] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.911658] dracut: dracut-044
[ 2.959281] dracut: rd.luks=0: removing cryptoluks activation
[ 2.965348] loop: module loaded
[ 2.966754] dracut: root was live:CDLABEL=VOID_LIVE, is now live:/dev/disk/by-label/VOID_LIVE
[ 2.986291] device-mapper: uevent: version 1.0.3
[ 2.986380] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel at redhat.com
[ 2.996992] systemd-udevd[238]: starting version 3.1.5
[ 2.997086] random: systemd-udevd urandom read with 11 bits of entropy available
[ 3.005873] dracut: rd.md=0: removing MD RAID activation
[ 3.035408] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 3.035449] ACPI: Lid Switch [LID]
[ 3.035504] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 3.035507] ACPI: Power Button [PWRB]
[ 3.035550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.035551] ACPI: Power Button [PWRF]
[ 3.037813] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.044200] wmi: Mapper loaded
[ 3.056790] Linux agpgart interface v0.103
[ 3.058018] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 125
[ 3.059137] SCSI subsystem initialized
[ 3.060191] ACPI: bus type USB registered
[ 3.060212] usbcore: registered new interface driver usbfs
[ 3.060221] usbcore: registered new interface driver hub
[ 3.060242] usbcore: registered new device driver usb
[ 3.060816] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 3.061744] [drm] Initialized drm 1.1.0 20060810
[ 3.062638] libata version 3.00 loaded.
[ 3.063905] ahci 0000:00:17.0: version 3.0
[ 3.064208] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[ 3.064211] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 3.064583] scsi host0: ahci
[ 3.066022] scsi host1: ahci
[ 3.066069] ata1: DUMMY
[ 3.066074] ata2: SATA max UDMA/133 abar m2048 at 0xf124c000 port 0xf124c180 irq 126
[ 3.072410] AVX2 version of gcm_enc/dec engaged.
[ 3.072412] AES CTR mode by8 optimization enabled
[ 3.074544] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.074551] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.075722] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 3.075728] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.075987] hub 1-0:1.0: USB hub found
[ 3.076003] hub 1-0:1.0: 12 ports detected
[ 3.084690] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.084694] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.084873] hub 2-0:1.0: USB hub found
[ 3.084885] hub 2-0:1.0: 6 ports detected
[ 3.088739] usb: port power management may be unreliable
[ 3.089668] [drm] Memory usable by graphics device = 4096M
[ 3.089670] [drm] VT-d active for gfx access
[ 3.089672] [drm] Replacing VGA console driver
[ 3.091382] Console: switching to colour dummy device 80x25
[ 3.097408] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.097410] [drm] Driver supports precise vblank timestamp query.
[ 3.098332] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 3.102164] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.120603] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.120868] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.120987] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 3.297387] fbcon: inteldrmfb (fb0) is primary device
[ 3.372960] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.373924] ata2.00: ATA-9: TOSHIBA THNSNJ512G8NY, JYTA0101, max UDMA/100
[ 3.373927] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.375776] ata2.00: configured for UDMA/100
[ 3.376554] scsi 1:0:0:0: Direct-Access ATA TOSHIBA THNSNJ51 0101 PQ: 0 ANSI: 5
[ 3.391180] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.411241] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.411602] scsi host2: usb-storage 2-1:1.0
[ 3.412392] usbcore: registered new interface driver usb-storage
[ 3.413978] usbcore: registered new interface driver uas
[ 3.437140] usb 1-10: new full-speed USB device number 2 using xhci_hcd
[ 3.564136] tsc: Refined TSC clocksource calibration: 2591.990 MHz
[ 3.564140] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cad98bda, max_idle_ns: 440795306906 ns
[ 3.602931] hub 1-10:1.0: USB hub found
[ 3.603041] hub 1-10:1.0: 4 ports detected
[ 3.879119] usb 1-10.2: new full-speed USB device number 3 using xhci_hcd
[ 4.414416] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 4.417674] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 4.418105] sd 1:0:0:0: [sda] Write Protect is off
[ 4.418108] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.418208] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.419282] sd 2:0:0:0: [sdb] 15360000 512-byte logical blocks: (7.86 GB/7.32 GiB)
[ 4.419400] sda: sda4
sda4: <openbsd: sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
[ 4.420733] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.420735] sd 2:0:0:0: [sdb] Mode Sense: 2b 80 00 08
[ 4.420932] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.422126] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.428438] sdb: sdb1 sdb2
[ 4.433004] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 4.564299] clocksource: Switched to clocksource tsc
[ 4.716297] [drm] RC6 on
[ 5.113249] Console: switching to colour frame buffer device 240x67
[ 5.124758] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.440774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.495198] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.498152] ISO 9660 Extensions: RRIP_1991A
[ 5.580519] random: nonblocking pool is initialized
[ 5.630881] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem
[ 5.634012] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.691853] dracut: Mounted root filesystem /dev/mapper/live-rw
[ 6.290244] dracut: Switching root
[ 6.932837] fuse init (API version 7.24)
[ 7.002555] raid6: sse2x1 gen() 9648 MB/s
[ 7.019552] raid6: sse2x1 xor() 7896 MB/s
[ 7.036551] raid6: sse2x2 gen() 12910 MB/s
[ 7.053548] raid6: sse2x2 xor() 9160 MB/s
[ 7.070550] raid6: sse2x4 gen() 13757 MB/s
[ 7.087555] raid6: sse2x4 xor() 10203 MB/s
[ 7.104544] raid6: avx2x1 gen() 20769 MB/s
[ 7.121543] raid6: avx2x2 gen() 23753 MB/s
[ 7.138540] raid6: avx2x4 gen() 24414 MB/s
[ 7.138540] raid6: using algorithm avx2x4 gen() 24414 MB/s
[ 7.138541] raid6: using avx2x2 recovery algorithm
[ 7.152128] xor: automatically using best checksumming function:
[ 7.161537] avx : 25472.000 MB/sec
[ 7.253349] Btrfs loaded
[ 7.294642] tun: Universal TUN/TAP device driver, 1.6
[ 7.294644] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 7.344804] PPP generic driver version 2.4.2
[ 7.400531] VFIO - User Level meta-driver version: 0.3
[ 7.501716] Bluetooth: Core ver 2.21
[ 7.501727] NET: Registered protocol family 31
[ 7.501728] Bluetooth: HCI device and connection manager initialized
[ 7.501730] Bluetooth: HCI socket layer initialized
[ 7.501732] Bluetooth: L2CAP socket layer initialized
[ 7.501735] Bluetooth: SCO socket layer initialized
[ 7.518360] Bluetooth: Virtual HCI driver ver 1.5
[ 7.831061] udevd[672]: starting version 3.1.5
[ 7.921165] ACPI: AC Adapter [ADP1] (on-line)
[ 7.979745] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 8.096056] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[ 8.096063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.118816] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.161858] Bluetooth: HCI UART driver ver 2.3
[ 8.161861] Bluetooth: HCI UART protocol H4 registered
[ 8.161862] Bluetooth: HCI UART protocol BCSP registered
[ 8.161862] Bluetooth: HCI UART protocol LL registered
[ 8.161863] Bluetooth: HCI UART protocol ATH3K registered
[ 8.161864] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 8.161880] Bluetooth: HCI UART protocol Intel registered
[ 8.161888] Bluetooth: HCI UART protocol BCM registered
[ 8.161889] Bluetooth: HCI UART protocol QCA registered
[ 8.175674] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 8.253106] ACPI: Battery Slot [BAT1] (battery present)
[ 8.253625] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.253627] ACPI: Thermal Zone [TZ01] (16 C)
[ 8.277746] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_exit [i915])
[ 8.326858] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.342283] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.23
[ 8.344545] toshiba_acpi: Unable to query Hotkey Event Type
[ 8.344589] input: Toshiba input device as /devices/virtual/input/input7
[ 8.413516] toshiba_acpi: Supported laptop features: hotkeys fan keyboard-backlight touchpad usb-sleep-charge usb-rapid-charge panel-power-on
[ 8.466206] ppdev: user-space parallel port driver
[ 8.634191] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.634195] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.634197] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 8.634199] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.634200] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.634202] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 8.634204] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 8.635047] Intel(R) Wireless WiFi driver for Linux
[ 8.635049] Copyright(c) 2003- 2015 Intel Corporation
[ 8.637497] iwlwifi 0000:02:00.0: Unsupported splx structure
[ 8.700223] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-20.ucode failed with error -2
[ 8.700241] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-19.ucode failed with error -2
[ 8.704130] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-18.ucode failed with error -2
[ 8.704153] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-17.ucode failed with error -2
[ 8.705142] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 8.705195] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 8.705238] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 8.705279] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 8.705322] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 8.820749] intel_rapl: Found RAPL domain package
[ 8.820757] intel_rapl: Found RAPL domain core
[ 8.820760] intel_rapl: Found RAPL domain uncore
[ 8.820764] intel_rapl: Found RAPL domain dram
[ 8.934494] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
[ 8.990629] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 9.034006] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 9.034228] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 9.035129] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 9.036317] iwlwifi 0000:02:00.0: can't access the RSA semaphore it is write protected
[ 9.231717] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 9.240764] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 9.462696] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 9.657162] udevd[767]: starting version 3.1.5
[ 9.784928] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input14
[ 9.796767] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[ 10.006427] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 10.006698] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.007055] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.008070] iwlwifi 0000:02:00.0: can't access the RSA semaphore it is write protected
[ 10.144357] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.144667] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.145633] iwlwifi 0000:02:00.0: can't access the RSA semaphore it is write protected
[ 10.228570] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
-------------- next part --------------
OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016
deraadt at amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8491311104 (8097MB)
avail mem = 8229494784 (7848MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd8efa000 (43 entries)
bios0: vendor TOSHIBA version "Version 5.60" date 04/21/2016
bios0: TOSHIBA PORTEGE Z30-C
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI SSDT SSDT HPET LPIT APIC MCFG MSDM SLIC SSDT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT BOOT SSDT DMAR FPDT ASF! BGRT
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) UAR1(S3) ECIR(S4) GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2395.11 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.44 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.44 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.44 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus 1 (RP02)
acpiprt6 at acpi0: bus 2 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus -1 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus -1 (RP11)
acpiprt15 at acpi0: bus -1 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpicpu0 at acpi0: C3(200 at 1034 mwait.1 at 0x60), C2(200 at 151 mwait.1 at 0x33), C1(1000 at 1 mwait.1), PSS
acpicpu1 at acpi0: C3(200 at 1034 mwait.1 at 0x60), C2(200 at 151 mwait.1 at 0x33), C1(1000 at 1 mwait.1), PSS
acpicpu2 at acpi0: C3(200 at 1034 mwait.1 at 0x60), C2(200 at 151 mwait.1 at 0x33), C1(1000 at 1 mwait.1), PSS
acpicpu3 at acpi0: C3(200 at 1034 mwait.1 at 0x60), C2(200 at 151 mwait.1 at 0x33), C1(1000 at 1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: PDOC, resource for DOCK
acpitz0 at acpi0: critical temperature is 102 degC
"INT3F0D" at acpi0 not configured
"PNP0401" at acpi0 not configured
"MSFT0001" at acpi0 not configured
"TOS020C" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
acpitoshiba0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "G71C000K6510" serial 2 type Li-ION oem "0"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
"INT3394" at acpi0 not configured
"INT340E" at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2501, 2500, 2400, 2300, 2100, 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz
memory map conflict 0xd9400000/0x400000
memory map conflict 0xd9800000/0x800000
memory map conflict 0xda000000/0x2000000
memory map conflict 0xf80fd000/0x1000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, TOSHIBA THNSNJ51, JYTA> SCSI3 0/direct fixed naa.500080d91062a155
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0255, Intel/0x2809, using Realtek/0x0255
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi, address ec:21:e5:09:3e:20
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub1 at uhub0 port 10 "O2 Micro OZ776 Hub" rev 1.10/1.10 addr 2
ugen0 at uhub1 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (53b4cac69ed2bd9b.a) swap on sd0b dump on sd0b
iwm0: could not read firmware iwm-8000C-16 (error 2)
iwm0: failed to load init firmware
More information about the Users
mailing list