console in UEFI boot
karu.pruun
karu.pruun at gmail.com
Wed Jul 6 02:51:32 PDT 2016
Update: the console works fine if one escapes to loader prompt and sets
mode to either 0 (80x25) or 1 (80x50), and then boots the system up. The
original mode set by EFI is 2 (210x55). When the system has booted up,
ttyv0 will still be smaller in the top left corner, but switching to any
other ttyv gives a full display (105x32).
So all in all: using DragonFly 4.5 and UEFI I have a multiboot machine
(macbookpro 15) with DragonFly, MacOSX, and I also installed FreeBSD for
testing purposes.
For those interested: DragonFly can be installed manually as described on
the manual page gpt(8). The difference is in creating partitions. For
booting, create a 1 GB partition and format without labelling:
gpt add -s 2000000 -t "DragonFly UFS1" adX
newfs /dev/adXsY
where X and Y are the disk and slice respectively. Other partitions can be
labelled as usual. cpdup boot stuff to the boot partition as explained in
gpt(8), and the rest to other partitions. When you're finished, mount the
EFI system partition
mount -t msdos /dev/adsX /mnt
and copy DragonFly's EFI bootloader to it
mkdir -p /mnt/EFI/dragonfly
cp /boot/boot1.efi /mnt/EFI/dragonfly/dragonfly_x64.efi
If you have an EFI boot manager like refind, you can boot DragonFly or any
other system by choosing the respective EFI bootloader at startup. If you
don't have a boot manager, then EFI will look for
\EFI\BOOT\BOOTx64.EFI
so copy DragonFly's EFI bootloader to this file,
cp /boot/boot1.efi /mnt/EFI/boot/bootx64.efi
Cheers
Peeter
--
On Tue, Jul 5, 2016 at 1:19 PM, karu.pruun <karu.pruun at gmail.com> wrote:
> Hello
>
> I am booting DragonFly via UEFI on a macbookpro and running into
> issues with console. UEFI puts console into a resolution 1680x1050,
> but as soon as kernel has loaded and starts it switches to 40x25 mode
> (or something similar, i.e. the default mode one sees at say CD boot),
> but does not quite succeed: there's a 40x25 black-white quadrant in
> the top-left corner and the rest is gray. This is compounded with
> another issue: when booting is almost finished, the console starts
> printing line feeds very fast although no key is pressed. In the end
> the console is unusable as the prompt gets line feeds 10x a second and
> nothing can be entered. Not sure the keyboard works at all. Aside from
> that the system is running fine when used via ssh.
>
> When booted using a CD the console and keyboard are fine.
>
> Can I set a variable in loader.conf or elsewhere to switch the mode
> back to 1680x1050 or something else?
>
> Cheers
>
> Peeter
>
> --
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20160706/85818a2c/attachment-0002.html>
More information about the Users
mailing list