re0 drivers (was tips for writing img to usb thumb drive)

[jungle Boogie]

On 2 January 2016 at 23:59, Sepherosa Ziehau <sepherosa at gmail.com> wrote:
> I have pushed some changes to the re's PHY initialization, you could
> try latest usb image; hope it works for you.
>
> Thanks,
> sephe


The build is finished and I don't see re0 with ifconfig. I checked
your commits against mine just to make sure I did the build correctly
and I see the changes you made.

I was on:
DragonFly fly.in.lylie.net 4.5-DEVELOPMENT DragonFly
v4.5.0.263.g9261e-DEVELOPMENT #0: Thu Dec 31 16:13:10 UTC 2015
root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
x86_64

Now on:
DragonFly fly.in.lylie.net 4.5-DEVELOPMENT DragonFly
v4.5.0.282.g5b1a5-DEVELOPMENT #0: Sun Jan  3 01:11:07 PST 2016
root at fly.in.lylie.net:/usr/obj/usr/src/sys/X86_64_GENERIC  x86_64


I see the same dmesg:
% dmesg | grep re0
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem
0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on
pci2
re0: Hardware rev. 0x50800000; PCI-E 125MHz
re0: PHY write failed
re0: PHY write failed
re0: MII without any phy!
device_probe_and_attach: re0 attach returned 6
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem
0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on
pci2
re0: Hardware rev. 0x50800000; PCI-E 125MHz
re0: PHY write failed
re0: PHY write failed
re0: MII without any phy!
device_probe_and_attach: re0 attach returned 6


% ifconfig
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2290
        ether 30:52:cb:a3:cf:a7
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng
        status: associated
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::3252:cbff:fea3:cfa7%wlan0 prefixlen 64 scopeid 0x6
        inet 192.168.0.56 netmask 0xffffff00 broadcast 192.168.0.255
        ether 30:52:cb:a3:cf:a7
        ssid somuch_ channel 6 (2437 MHz 11g ht/20) bssid 64:70:02:32:c2:48
        regdomain 108 indoor ecm authmode WPA privacy ON deftxkey UNDEF
        TKIP 3:128-bit txpower 20 bmiss 7 scanvalid 60 protmode CTS
        ampdulimit 64k shortgi wme burst roaming MANUAL
        media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
        status: associated
urtwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2290
        ether 80:1f:02:68:5d:39
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier

pciconf -lv:
re0 at pci0:2:0:0: class=0x020000 card=0x200f1043 chip=0x816810ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet

Any ideas?

-- 
-------
inum: 883510009027723
sip: jungleboogie at sip2sip.info
xmpp: jungle-boogie at jit.si