re0 drivers (was tips for writing img to usb thumb drive)

jungle Boogie jungleboogie0 at gmail.com
Sun Jan 3 11:48:56 PST 2016


On 3 January 2016 at 04:35, Sepherosa Ziehau <sepherosa at gmail.com> wrote:
> On Sun, Jan 3, 2016 at 5:33 PM, jungle Boogie <jungleboogie0 at gmail.com> wrote:
>> On 2 January 2016 at 23:59, Sepherosa Ziehau <sepherosa at gmail.com> wrote:
>>> I have pushed some changes to the re's PHY initialization, you could
>>> try latest usb image; hope it works for you.
>>>
>>> Thanks,
>>> sephe
>>
>>
>> The build is finished and I don't see re0 with ifconfig. I checked
>> your commits against mine just to make sure I did the build correctly
>> and I see the changes you made.
>
>
> Pull the latest master w/ at least d7c373a44888285dd1fe95c1dafd678126722b96
> And apply the following patch:
> https://www.dragonflybsd.org/~sephe/re_cfg.diff
>
> curl -o ~/re_cfg.diff https://www.dragonflybsd.org/~sephe/re_cfg.diff
> patch -p 1 -i ~/re_cfg.diff
>
> Rebuild and reinstall kernel.


I did as you requested.

I was on:
>> DragonFly fly.in.lylie.net 4.5-DEVELOPMENT DragonFly
>> v4.5.0.282.g5b1a5-DEVELOPMENT #0: Sun Jan  3 01:11:07 PST 2016
>> root at fly.in.lylie.net:/usr/obj/usr/src/sys/X86_64_GENERIC  x86_64

Now on:
DragonFly fly.in.lylie.net 4.5-DEVELOPMENT DragonFly
v4.5.0.283.gd7c37-DEVELOPMENT #1: Sun Jan  3 09:35:07 PST 2016
sean at fly.in.lylie.net:/usr/obj/usr/src/sys/X86_64_GENERIC  x86_64


Unfortunately, I still see the same things in dmesg:
% dmesg | grep re0
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem
0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on
pci2
re0: Hardware rev. 0x50800000; PCI-E 125MHz
re0: PHY write failed
re0: PHY write failed
re0: MII without any phy!
device_probe_and_attach: re0 attach returned 6
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem
0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on
pci2
re0: Hardware rev. 0x50800000; PCI-E 125MHz
re0: PHY write failed
re0: PHY write failed
re0: MII without any phy!
device_probe_and_attach: re0 attach returned 6
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem
0xb2100000-0xb2103fff,0xb2104000-0xb2104fff irq 18 at device 0.0 on
pci2
re0: Hardware rev. 0x50800000; PCI-E 125MHz
re0: PHY write failed
re0: PHY write failed
re0: MII without any phy!
device_probe_and_attach: re0 attach returned 6


Do you need to see the output of anything more?

>
> Thanks,
> sephe
>

-- 
-------
inum: 883510009027723
sip: jungleboogie at sip2sip.info
xmpp: jungle-boogie at jit.si



More information about the Users mailing list