growfs for hammer?

[Remi Locherer]

On Thu, Mar 05, 2015 at 10:37:54AM +0100, Sascha Wildner wrote:
> On Wed, 04 Mar 2015 08:29:47 +0100, Remi Locherer <remi.locherer at relo.ch>
> wrote:
> 
> >Hi,
> >
> >I installed dragonfly on a server with a 2TB raid volume. The installer
> >just used 500GB out of the 2TB. I could grow the slice and partition
> >with fdisk and disklabel64. How can I grow hammer?
> 
> You can't.
> 
> >hurricane# fdisk da0
> >******* Working on device /dev/da0 *******
> >parameters extracted from device are:
> >cylinders=242244 heads=256 sectors/track=63 (16128 blks/cyl)
> >
> >Figures below won't work with BIOS for partitions not in cyl 1
> >parameters to be used for BIOS calculations are:
> >cylinders=242244 heads=256 sectors/track=63 (16128 blks/cyl)
> >
> >Media sector size is 512
> >Warning: BIOS sector numbering starts with sector 1
> >Information from DOS bootblock is:
> >The data for partition 1 is:
> >sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
> >    start 63, size 3906911169 (1907671 Meg), flag 80 (active)
> >        beg: cyl 0/ head 1/ sector 1;
> >        end: cyl 1023/ head 255/ sector 63
> 
> Looks OK, 2TB here.
> 
> ># /dev/da0s1:
> >#
> ># Informational fields calculated from the above
> ># All byte equivalent offsets must be aligned
> >#
> ># boot space:    1044992 bytes
> ># data space: 1953454555 blocks # 1907670.46 MB (2000337464832 bytes)
> 
> 2TB here too.
> 
> >16 partitions:
> >#          size     offset    fstype   fsuuid
> >  a:    1048576          0    4.2BSD    #    1024.000MB
> >  b: 1952404952    1048576    HAMMER    # 1906645.461MB
> >  a-stor_uuid: f3b48ee3-9b47-11e4-ab34-012481a71e2c
> >  b-stor_uuid: f3b48f25-9b47-11e4-ab34-012481a71e2c
> 
> This looks weird, it is showing a 1GB /boot and the rest seems to be
> assigned to the 'b' partition. Did you remove or mess with swap in the
> installer's partition configuration screen?

I removed swap in the installer and dedicated an SSD (da1) to swap after
the installation.
 
Remi