growfs for hammer?
Remi Locherer
remi.locherer at relo.ch
Tue Mar 3 23:29:47 PST 2015
Hi,
I installed dragonfly on a server with a 2TB raid volume. The installer
just used 500GB out of the 2TB. I could grow the slice and partition
with fdisk and disklabel64. How can I grow hammer?
hurricane# fdisk da0
******* Working on device /dev/da0 *******
parameters extracted from device are:
cylinders=242244 heads=256 sectors/track=63 (16128 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=242244 heads=256 sectors/track=63 (16128 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
start 63, size 3906911169 (1907671 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
hurricane#
hurricane# disklabel da0s1
# /dev/da0s1:
#
# Informational fields calculated from the above
# All byte equivalent offsets must be aligned
#
# boot space: 1044992 bytes
# data space: 1953454555 blocks # 1907670.46 MB (2000337464832 bytes)
#
# NOTE: If the partition data base looks odd it may be
# physically aligned instead of slice-aligned
#
diskid: e96698b4-9b47-11e4-ab34-012481a71e2c
label:
boot2 data base: 0x000000001000
partitions data base: 0x000000100200
partitions data stop: 0x01d1bd777000
backup label: 0x01d1bd777000
total size: 0x01d1bd778200 # 1907671.47 MB
alignment: 4096
display block size: 1024 # for partition display only
16 partitions:
# size offset fstype fsuuid
a: 1048576 0 4.2BSD # 1024.000MB
b: 1952404952 1048576 HAMMER # 1906645.461MB
a-stor_uuid: f3b48ee3-9b47-11e4-ab34-012481a71e2c
b-stor_uuid: f3b48f25-9b47-11e4-ab34-012481a71e2c
hurricane#
hurricane# hammer info
Volume identification
Label ROOT
No. Volumes 1
FSID f54133e0-9b47-11e4-ab34-012481a71e2c
HAMMER Version 6
Big block information
Total 63928
Used 566 (0.89%)
Reserved 97 (0.15%)
Free 63265 (98.96%)
Space information
No. Inodes 112391
Total size 499G (536266932224 bytes)
Used 4.4G (0.89%)
Reserved 776M (0.15%)
Free 494G (98.96%)
PFS information
PFS ID Mode Snaps Mounted on
0 MASTER 7 /
1 MASTER 7 /var
2 MASTER 0 /tmp
3 MASTER 7 /usr
4 MASTER 7 /home
5 MASTER 0 /usr/obj
6 MASTER 7 /var/crash
7 MASTER 0 /var/tmp
8 MASTER 1 /jails
hurricane#
hurricane# dmesg
Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v4.0.3.6.g14a55-RELEASE #0: Thu Feb 26 15:44:52 CET 2015
root at hurricane.relo.ch:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC clock: 2833435237 Hz, i8254 clock: 1193182 Hz
CPU: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz (2833.45-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Thermal and PM Features=0x1<SENSOR>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 25767588864 (24573 MB)
avail memory = 24357068800 (23228 MB)
lapic: divisor index 0, frequency 166673048 Hz
Initialize MI interrupts
VMM: VMENTRY_LOAD_IA32_EFER not supported by this CPU
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of vn0 to noop
disk scheduler: set policy of vn1 to noop
disk scheduler: set policy of vn2 to noop
disk scheduler: set policy of vn3 to noop
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x00000000CFE447C0 00007C (v01 HP ProLiant 00000002 ?? 0000162E)
ACPI: FACP 0x00000000CFE44840 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140828/tbfadt-730)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20140828/tbfadt-730)
ACPI: DSDT 0x00000000CFE44940 002148 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x00000000CFE44100 000040
ACPI: SPCR 0x00000000CFE44140 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E)
ACPI: MCFG 0x00000000CFE441C0 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0x00000000CFE44200 000038 (v01 HP ProLiant 00000002 ?? 0000162E)
ACPI: SPMI 0x00000000CFE44240 000040 (v05 HP ProLiant 00000001 ?? 0000162E)
ACPI: ERST 0x00000000CFE44280 0001D0 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: APIC 0x00000000CFE44480 00009E (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 0x00000000CFE44540 000176 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: BERT 0x00000000CFE446C0 000030 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: HEST 0x00000000CFE44700 0000BC (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: SSDT 0x00000000CFE49000 000C85 (v01 HP SSDTP 00000001 INTL 20061109)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <HP ProLiant> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
ACPI Warning: \\_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20140828/nsprepkg-138)
pci9: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib3
pcib4: <MPTABLE PCI-PCI bridge> at device 1.0 on pci10
pci14: <PCI bus> on pcib4
pcib5: <MPTABLE PCI-PCI bridge> at device 2.0 on pci10
pci15: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci9
pci16: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib7
ciss0: <HP Smart Array P400i> port 0x4000-0x40ff mem 0xfddf0000-0xfddf0fff,0xfde00000-0xfdefffff irq 16 at device 0.0 on pci6
ciss0: PERFORMANT Transport
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci19: <ACPI PCI bus> on pcib8
pcib9: <MPTABLE PCI-PCI bridge> at device 5.0 on pci0
pci22: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib11
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseT PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: MAC address: 00:24:81:a7:1e:2c
pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib13
bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 19 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseT PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: MAC address: 00:24:81:a7:1e:30
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2>ugen0.1: <Intel> at usbus0
port uhub0: 0x1020<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
-0x103f irq 17 at device 29.1 on pci0
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3>ugen1.1: <Intel> at usbus1
port uhub1: 0x1040<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
-0x105fuhub0: irq 2 ports with 2 removable, self powered
18 at device 29.2 on pci0
intr 16 on cpu0 at 40001/40000 hz, livelocked limit engaged!
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4>ugen2.1: <Intel> at usbus2
port uhub1: uhub2: 2 ports with 2 removable, self powered
0x1060<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
-0x107f irq 19 at device 29.3 on pci0
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 63XXESB USB 2.0 controller>ugen3.1: <Intel> at usbus3
mem uhub3: 0xf7df0000<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
-0xf7df03ff irq uhub2: 162 ports with 2 removable, self powered
at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib14: ugen4.1: <Intel> at usbus4
uhub4: at device 30.0<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
on pci0
pci1: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display>uhub3: port 2 ports with 2 removable, self powered
0x3000-0x30ff mem 0xf7ff0000-0xf7ffffff,0xd8000000-0xdfffffff irq 23 at device 3.0 on pci1
vgapci0: Boot video device
pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 21
pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 22
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
intr 16 on cpu0 at 6903/20000 hz, livelock removed
usbus5: <UHCI (generic) USB controller> on uhci4
usbus5: 12Mbps Full Speed USB v1.0
ugen5.1: <0x103c> at usbus5
uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
pci1: <serial bus> (vendor 0x103c, dev 0x3302) at device 4.6 irq 21
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x500-0x50f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 17 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
uhub5: 2 ports with 2 removable, self powered
disk scheduler: set policy of acd0 to noop
acd0: CDRW <TSSTcorpCDW/DVD TS-L462D/HG01> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
intr 16 on cpu0 at 40001/40000 hz, livelocked limit engaged!
ugen5.2: <HP> at usbus5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
ums0: <Virtual Mouse> on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
intr 16 on cpu0 at 21/20000 hz, livelock removed
uhub4: 8 ports with 8 removable, self powered
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5303D00 000297 (v01 HP SSDT0 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EA930 0000AD (v01 HP CPU0CST 00000001 INTL 20061109)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5303FC0 000297 (v01 HP SSDT1 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EAA90 0000AD (v01 HP CPU1CST 00000001 INTL 20061109)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
cpu_pst1: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst1 attach returned 6
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5304280 000297 (v01 HP SSDT2 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EA9E0 0000AD (v01 HP CPU2CST 00000001 INTL 20061109)
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
cpu_pst2: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst2 attach returned 6
clockmod2: <CPU clock modulation> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5304540 00029C (v01 HP SSDT3 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EAB40 0000AD (v01 HP CPU3CST 00000001 INTL 20061109)
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
cpu_pst3: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst3 attach returned 6
clockmod3: <CPU clock modulation> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
cpu4: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5304800 000298 (v01 HP SSDT4 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EABF0 0000AD (v01 HP CPU4CST 00000001 INTL 20061109)
cpu_cst4: <ACPI CPU C-State> on cpu4
cpu_pst4: <ACPI CPU P-State> on cpu4
cpu_pst4: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst4 attach returned 6
clockmod4: <CPU clock modulation> on cpu4
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
cpu5: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5304AC0 000298 (v01 HP SSDT5 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EACA0 0000AD (v01 HP CPU5CST 00000001 INTL 20061109)
cpu_cst5: <ACPI CPU C-State> on cpu5
cpu_pst5: <ACPI CPU P-State> on cpu5
cpu_pst5: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst5 attach returned 6
clockmod5: <CPU clock modulation> on cpu5
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
cpu6: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5304D80 000298 (v01 HP SSDT6 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EAD50 0000AD (v01 HP CPU6CST 00000001 INTL 20061109)
cpu_cst6: <ACPI CPU C-State> on cpu6
cpu_pst6: <ACPI CPU P-State> on cpu6
cpu_pst6: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst6 attach returned 6
clockmod6: <CPU clock modulation> on cpu6
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
cpu7: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0F5305040 000298 (v01 HP SSDT7 00000001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE04D7EAE00 0000AD (v01 HP CPU7CST 00000001 INTL 20061109)
cpu_cst7: <ACPI CPU C-State> on cpu7
cpu_pst7: <ACPI CPU P-State> on cpu7
cpu_pst7: Inconsistent _PSS cross Processor objects
device_probe_and_attach: cpu_pst7 attach returned 6
clockmod7: <CPU clock modulation> on cpu7
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
intr 16 on cpu0 at 40001/40000 hz, livelocked limit engaged!
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
ppc0: cannot reserve I/O port range
ACPI: domain3 misses processors, should be 2, got 0
ACPI: domain2 misses processors, should be 2, got 0
ACPI: domain1 misses processors, should be 2, got 0
ACPI: domain0 misses processors, should be 2, got 1
hpt27xx: no controller detected.
CAM: Configuring 4 busses
intr 16 on cpu0 at 389/20000 hz, livelock removed
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of da1 to noop
disk scheduler: set policy of cd0 to noop
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1(1VOLUME OK> Fixed Direct Access SCSI-5 device
da0: Serial Number PH92MP8253
da0: 135.168MB/s transfers
da0: Command Queueing Enabled
da0: 1907675MB (3906918832 512 byte sectors: 255H 63S/T 65535C)
can't re-use a leaf (PH92MP8253_____)!
da1 at ciss0 bus 0 target 1 lun 0
da1: <COMPAQ RAID 1(1VOLUME OK> Fixed Direct Access SCSI-5 device
da1: Serial Number PH92MP8253
da1: 135.168MB/s transfers
da1: Command Queueing Enabled
da1: 76285MB (156232125 512 byte sectors: 255H 63S/T 9725C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CDW/DVD TS-L462D HG01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
intr 16 on cpu0 at 40001/40000 hz, livelocked limit engaged!
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/PH92MP8253_____.s1b
HAMMER(ROOT) recovery check seqno=00390385
HAMMER(ROOT) recovery range 3000000009f88968-3000000009f88968
HAMMER(ROOT) recovery nexto 3000000009f88968 endseqno=00390386
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 13408k, remaining available: 16384k
Mounting devfs
pflog0: promiscuous mode enabled
Regards,
Remi
More information about the Users
mailing list