SSD questions

[Matthew Dillon]

Yes.  If you have that much on spinning rust then I would dedicate a whole
SSD (separate from your boot SSD) to swapcache.  At least 128G, maybe even
a 256G SSD.   32G is woefully insufficient as a swapcache for 10TB of data.

-Matt

On Thu, Mar 26, 2015 at 4:07 PM, Tim Darby <t+dfbsd at timdarby.net> wrote:

> On Thu, Mar 26, 2015 at 3:49 PM, Matthew Dillon <
> dillon at apollo.backplane.com> wrote:
>
>>
>>     I would not use the installer to try to set it up.  I'd do it manually
>>     if you know enough about how installs work to do that.  Leave your 40G
>>     SSD in place until you have your new SSD fully operational and
>> booting.
>>     Be careful not to accidently wipe your original SSD while messing with
>>     the new one :-)
>>
>>                                                 -Matt
>>
>>
> Thanks! You've talked me out of using the installer. :) I should have
> mentioned that I have approximately 10TB of stuff on spinning disks as
> well. Does that change the swap recommendation?
>
> Tim
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20150327/8a7b926a/attachment-0002.html>