AsRock Vision3D 137D, NVidia GeForce 425 (X server conf)
George
g.lister at nodeunit.com
Mon Mar 9 09:47:54 PDT 2015
On 15-03-09 04:09 PM, George wrote:
>
>
> On 15-03-09 03:26 PM, Zachary Crownover wrote:
>> DragonFlyBSD and PCBSD are not comparable as you make them right now.
>> PCBSD takes almost everything from upstream FreeBSD and patches it
>> slightly for their system with a lot of GUI work to make the default
>> interface and configuration easier for you, but under the hood, it's
>> still 99% FreeBSD. DragonFlyBSD forked from FreeBSD 11 years ago and
>> has become it's own completely independent and separate project.
>> There is cross pollination of code from time to time, but it has
>> diverged greatly from FreeBSD. There is no Nvidia driver for
>> DragonFlyBSD. The PCBSD Nvidia driver works because it's written for
>> FreeBSD, and binaries compiled on those two will work on the other,
>> they're using the same kernel.
>> Vesa is sort of a last resort, and I don't remember if the nouveau
>> is up to date at all, we don't have Nvidia support at this time.
>
> Hi Zachary,
>
> Thanks for the response actually the nv driver lists a number of
> NVidia cards, that's probably nouveau, but unfortunately mine is not
> on the list. BTW I am not trying to make DragonFly the same as PC-BSD
> I know they are not I was just hoping that some drivers move over and
> maybe I was missing an update or maybe someone has gotten the same
> card to work.
>
> I shall give it a few more tries as I would really like to give
> DragonFly a run as a system and see how it works for a daily driver so
> far I am really impressed by the speed.
>
> Thanks for your time.
> Cheers,
> George
>
BTW on a slightly different angle I just went to NVidia's web site and
downloaded the FreeBSD x86_64 driver files and they contain sources and
instructions for FreeBSD. How would one go about porting something like
this for DragonFly BSD??? Or maybe I should ask Francois Tigeot I saw a
presentation he did in Sofia last year and I think he has been working
on stuff like that?
Thanks.
George
>>
>> On Mon, Mar 9, 2015 at 2:59 AM, George <g.lister at nodeunit.com
>> <mailto:g.lister at nodeunit.com>> wrote:
>>
>> Hi guys,
>>
>> I have the following question. I have an AsRock Vision 3D 137D
>> HTPC with i3 core and an NVidia GeForce 425 card.
>>
>> I wish to use the system for a personal desktop and some
>> development etc.., the personal desktop is kind of a high
>> priority for this system for me.
>>
>> I have managed to get a sort of decent, screen uses 1600x1200
>> instead of the 1920x1080 optimal fonts are streched etc. (I am
>> running XFCE), config for X see below:
>>
>> # cat /etc/X11/xorg.conf
>> Section "ServerLayout"
>> Identifier "X.org Configured"
>> Screen 0 "Screen0" 0 0
>> InputDevice "Mouse0" "CorePointer"
>> InputDevice "Keyboard0" "CoreKeyboard"
>> EndSection
>>
>> Section "Files"
>> ModulePath "/usr/local/lib/xorg/modules"
>> FontPath "/usr/local/lib/X11/fonts/misc/"
>> FontPath "/usr/local/lib/X11/fonts/TTF/"
>> FontPath "/usr/local/lib/X11/fonts/OTF/"
>> FontPath "/usr/local/lib/X11/fonts/Type1/"
>> FontPath "/usr/local/lib/X11/fonts/100dpi/"
>> FontPath "/usr/local/lib/X11/fonts/75dpi/"
>> EndSection
>>
>> Section "Module"
>> Load "glx"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Keyboard0"
>> Driver "kbd"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Mouse0"
>> Driver "mouse"
>> Option "Protocol" "auto"
>> Option "Device" "/dev/sysmouse"
>> Option "ZAxisMapping" "4 5 6 7"
>> EndSection
>>
>> Section "Monitor"
>> Identifier "Monitor0"
>> VendorName "Samsung"
>> ModelName "BX2235 23inch LCD"
>> HorizSync 31.469-79.976 <tel:31.469-79.976>
>> VertRefresh 56.250-75.029 <tel:56.250-75.029>
>> Modeline "1152x864_75.00" 104.00 1152 1224 1344
>> 1536 864 867 871 905 -hsync +vsync
>> Modeline "1280x800_59.81" 83.25 1280 1352 1480
>> 1680 800 803 809 831 -hsync +vsync
>> Modeline "1280x800_74.93" 106.25 1280 1360 1488
>> 1696 800 803 809 838 -hsync +vsync
>> Modeline "1280x1024_60.02" 109.00 1280 1368 1496
>> 1712 1024 1027 1034 1063 -hsync +vsync
>> Modeline "1280x1024_75.03" 138.75 1280 1368 1504
>> 1728 1024 1027 1034 1072 -hsync +vsync
>> Modeline "1440x900_59.89" 106.25 1440 1528 1672 1904
>> 900 903 909 934 -hsync +vsync
>> Modeline "1440x900_74.98" 136.50 1440 1536 1688
>> 1936 900 903 909 942 -hsync +vsync
>> Modeline "1680x1200_60.00" 168.25 1680 1792 1968 2256
>> 1200 1203 1213 1245 -hsync +vsync
>> Modeline "1680x1050_59.95" 146.00 1680 1784 1960 2240
>> 1050 1053 1059 1089 -hsync +vsync
>> Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576
>> 1080 1083 1088 1120 -hsync +vsync
>> EndSection
>>
>> Section "Device"
>> ### Available Driver options are:-
>> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
>> ### <percent>: "<f>%"
>> ### [arg]: arg optional
>> #Option "ShadowFB" # [<bool>]
>> #Option "DefaultRefresh" # [<bool>]
>> #Option "ModeSetClearScreen" # [<bool>]
>> Identifier "Card0"
>> Driver "vesa"
>> BusID "PCI:1:0:0"
>> EndSection
>>
>> Section "Screen"
>> Identifier "Screen0"
>> Device "Card0"
>> Monitor "Monitor0"
>> SubSection "Display"
>> Viewport 0 0
>> Depth 1
>> Modes "1152x864_75.00" "1280x800_59.81"
>> "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>> "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>> "1680x1050_59.95" "1920x1080_60.00"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 4
>> Modes "1152x864_75.00" "1280x800_59.81"
>> "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>> "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>> "1680x1050_59.95" "1920x1080_60.00"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 8
>> Modes "1152x864_75.00" "1280x800_59.81"
>> "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>> "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>> "1680x1050_59.95" "1920x1080_60.00"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 15
>> Modes "1152x864_75.00" "1280x800_59.81"
>> "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>> "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>> "1680x1050_59.95" "1920x1080_60.00"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 16
>> Modes "1152x864_75.00" "1280x800_59.81"
>> "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>> "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>> "1680x1050_59.95" "1920x1080_60.00"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 24
>> Modes "1152x864_75.00" "1280x800_59.81"
>> "1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
>> "1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
>> "1680x1050_59.95" "1920x1080_60.00"
>> EndSubSection
>> EndSection
>>
>> I tried also the "nv" NVidia??? driver but I get back "GeForce
>> 425 not supported" the other drivers are ATI etc.. which will ot
>> work.
>>
>> I have tried PC-BSD 10.1 release on the machine and it has an
>> NVidia driver which detects the card and everything looks OK on
>> the screen. DragonFly is a FreeBSD derivative just like PC-BSD. I
>> am wondering whether the driver has not been ported yet?? I have
>> used PC-BSD and it is very nice but it is kind of too slow
>> (compared to Ubuntu on the same machine) and I am having some
>> issues accessing an NetBSD NFS server it hangs with timeouts on
>> lockd ... anyway long story short. I decided to give DragonFly a
>> try and it is smocking fast to boot to shutdown to install
>> packages etc. ... if I could only get X setup it would be great.
>> Then I can move on to fighting HP printing etc. ;).
>>
>> Here is a dmesg from the machine:
>>
>> $ dmesg
>> Copyright (c) 2003-2014 The DragonFly Project.
>> Copyright (c) 1992-2003 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
>> 1993, 1994
>> The Regents of the University of California. All rights reserved.
>> DragonFly v4.0.3-RELEASE #27: Thu Jan 22 17:19:56 PST 2015
>> root at pkgbox64.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC
>> TSC invariant clock: 2409543436 <tel:2409543436> Hz, i8254 clock:
>> 1193223 Hz
>> CPU: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (2409.47-MHz
>> K8-class CPU)
>> Origin = "GenuineIntel" Id = 0x20655 Stepping = 5
>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>> Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT>
>> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>> AMD Features2=0x1<LAHF>
>> Thermal and PM Features=0x5<SENSOR,ARAT>
>> MONITOR/MWAIT Features=0x3<CST,INTBRK>
>> real memory = 6433078272 (6135 MB)
>> avail memory = 6023581696 <tel:6023581696> (5744 MB)
>> lapic: divisor index 0, frequency 66929700 Hz
>> Initialize MI interrupts
>> TSC testing MP synchronization ...
>> TSC is MP synchronized
>> TSC: cputimer freq 75296071, shift 5
>> FQ scheduler policy version 1.1 loaded
>> wdog: In-kernel automatic watchdog reset enabled
>> kbd1 at kbdmux0
>> disk scheduler: set policy of vn0 to noop
>> disk scheduler: set policy of vn1 to noop
>> disk scheduler: set policy of vn2 to noop
>> disk scheduler: set policy of vn3 to noop
>> disk scheduler: set policy of md0 to noop
>> md0: Malloc disk
>> ACPI: RSDP 0x00000000000F9EF0 000014 (v00 ACPIAM)
>> ACPI: RSDT 0x00000000D3770000 000044 (v01 102410 RSDT1223
>> 20101024 MSFT 00000097)
>> ACPI: FACP 0x00000000D3770200 000084 (v01 A_M_I OEMFACP 12000601
>> MSFT 00000097)
>> ACPI: DSDT 0x00000000D3770460 0074A4 (v01 AS388 AS388115
>> 00000115 INTL 20051117)
>> ACPI: FACS 0x00000000D3780000 000040
>> ACPI: APIC 0x00000000D3770390 00008C (v01 102410 APIC1223
>> 20101024 MSFT 00000097)
>> ACPI: MCFG 0x00000000D3770420 00003C (v01 102410 OEMMCFG 20101024
>> MSFT 00000097)
>> ACPI: OEMB 0x00000000D3780040 000072 (v01 102410 OEMB1223
>> 20101024 MSFT 00000097)
>> ACPI: AAFT 0x00000000D377A460 000027 (v01 102410 OEMAAFT 20101024
>> MSFT 00000097)
>> ACPI: HPET 0x00000000D377A490 000038 (v01 102410 OEMHPET 20101024
>> MSFT 00000097)
>> ACPI: ASF! 0x00000000D377A4D0 000099 (v32 LEGEND I865PASF
>> 00000001 INTL 20051117)
>> ACPI: SSDT 0x00000000D37815F0 000363 (v01 DpgPmm CpuPm 00000012
>> INTL 20051117)
>> cryptosoft0: <software crypto> on motherboard
>> aesni0: No AESNI support.
>> padlock0: No ACE support.
>> rdrand0: No RdRand support.
>> acpi0: <102410 RSDT1223> on motherboard
>> ACPI: All ACPI Tables successfully acquired
>> ACPI FADT: SCI testing interrupt mode ...
>> ACPI FADT: SCI select level/high
>> ACPI: Executed 1 blocks of module-level executable AML code
>> objcache_reclaimlist
>> objcache_reclaimlist
>> objcache_reclaimlist
>> objcache_reclaimlist
>> acpi0: Power Button (fixed)
>> Warning: ACPI is disabling APM's device. You can't run both
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> acpi_hpet0: <High Precision Event Timer> iomem
>> 0xfed00000-0xfed003ff on acpi0
>> acpi_hpet0: frequency 14318180
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> pcib1: No _PRT found, routing with pci
>> pcib1: No _PRT found, routing with pci
>> vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem
>> 0xd6000000-0xd7ffffff,0xd8000000-0xdfffffff,0xfa000000-0xfaffffff
>> irq 16 at device 0.0 on pci1
>> vgapci0: Boot video device
>> pci1: <multimedia, HDA> (vendor 0x10de, dev 0x0bea) at device 0.1
>> irq 17
>> pci0: <dasp> (vendor 0x8086, dev 0x0050) at device 4.0 irq 16
>> ehci0: <Intel PCH USB 2.0 controller USB-B> mem
>> 0xf9ff8000-0xf9ff83ff irq 16 at device 26.0 on pci0
>> usbus0: EHCI version 1.0
>> usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
>> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x3b56) at device
>> 27.0 irq 22
>> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
>> pci2: <ACPI PCI bus> on pcib2
>> re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe800-0xe8ff
>> mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8ffffff irq 16 at device
>> 0.0 on pci2
>> re0: Hardware rev. 0x2c000000; PCI-E 125MHz
>> miibus0: <MII bus> on re0
>> rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
>> rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>> 1000baseT, 1000baseT-FDX, auto
>> usbus0: 480Mbps High Speed USB v2.0
>> re0: MAC address: e0:69:95:1f:6d:81
>> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
>> pci3: <ACPI PCI bus> on pcib3
>> xhci0: <NEC uPD720200 USB 3.0 controller> mem
>> 0xfbdfe000-0xfbdfffff irq 17 at device 0.0 on pci3
>> ugen0.1: <Intel> at usbus0
>> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>> usbus0
>> xhci0: 32 byte context size.
>> usbus1 on xhci0
>> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
>> pci4: <ACPI PCI bus> on pcib4
>> ath0: <Atheros 9287> mem 0xfbef0000-0xfbefffff irq 18 at device
>> 0.0 on pci4
>> usbus1: 5.0Gbps Super Speed USB v3.0
>> ugen1.1: <0x1033> at usbus1
>> uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>
>> on usbus1
>> ath0: AR9287 mac 384.2 RF5133 phy 15.15
>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
>> pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
>> pci5: <ACPI PCI bus> on pcib5
>> xhci1: <XHCI (generic) USB 3.0 controller> mem
>> 0xfbff0000-0xfbffffff irq 19 at device 0.0 on pci5
>> xhci1: 32 byte context size.
>> usbus2 on xhci1
>> usbus2: 5.0Gbps Super Speed USB v3.0
>> ehci1: <Intel PCH USB 2.0 controller USB-A> mem
>> 0xf9ff2000-0xf9ff23ff irq 23 at device 29.0 on pci0
>> usbus3: EHCI version 1.0
>> ugen2.1: <0x1b73> at usbus2
>> uhub2: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>
>> on usbus2
>> usbus3: <Intel PCH USB 2.0 controller USB-A> on ehci1
>> usbus3: 480Mbps High Speed USB v2.0
>> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> pci6: <ACPI PCI bus> on pcib6
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <Intel ATA controller> port
>> 0xc080-0xc08f,0xc400-0xc40f,0xc480-0xc483,0xc800-0xc807,0xc880-0xc883,0xcc00-0xcc07
>> irq 19 at device 31.2 on pci0
>> ata2: <ATA channel 0> on atapci0
>> ugen3.1: <Intel> at usbus3
>> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>> usbus3
>> disk scheduler: set policy of ad4 to noop
>> ad4: 953869MB <TOSHIBA MQ01ABD100 AX001A> at ata2-master UDMA33
>> ata3: <ATA channel 1> on atapci0
>> uhub2: 2 ports with 2 removable, self powered
>> pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x3b30) at device
>> 31.3 irq 18
>> atapci1: <Intel ATA controller> port
>> 0xb080-0xb08f,0xb400-0xb40f,0xb480-0xb483,0xb800-0xb807,0xb880-0xb883,0xbc00-0xbc07
>> irq 19 at device 31.5 on pci0
>> ata4: <ATA channel 0> on atapci1
>> uhub1: 4 ports with 4 removable, self powered
>> unknown: timeout waiting for read DRQ
>> unknown: timeout waiting for read DRQ
>> disk scheduler: set policy of acd0 to noop
>> acd0: DVDR <Slimtype DVD A DL8ATS/XAB2> at ata4-master UDMA33
>> ata5: <ATA channel 1> on atapci1
>> uhub3: 8 ports with 8 removable, self powered
>> acpi_button0: <Power Button> on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> ACPI: Dynamic OEM Table Load:
>> ACPI: SSDT 0xFFFFFFE03FACB600 001028 (v01 DpgPmm P001Ist 00000011
>> INTL 20051117)
>> ACPI: Dynamic OEM Table Load:
>> ACPI: SSDT 0xFFFFFFE0B6167380 0004F4 (v01 PmRef P001Cst 00003001
>> INTL 20051117)
>> cpu_cst0: <ACPI CPU C-State> on cpu0
>> cpu_pst0: <ACPI CPU P-State> on cpu0
>> clockmod0: <CPU clock modulation> on cpu0
>> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>> cpu1: <ACPI CPU> on acpi0
>> cpu_cst1: <ACPI CPU C-State> on cpu1
>> cpu_pst1: <ACPI CPU P-State> on cpu1
>> clockmod1: <CPU clock modulation> on cpu1
>> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
>> cpu2: <ACPI CPU> on acpi0
>> cpu_cst2: <ACPI CPU C-State> on cpu2
>> cpu_pst2: <ACPI CPU P-State> on cpu2
>> clockmod2: <CPU clock modulation> on cpu2
>> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
>> cpu3: <ACPI CPU> on acpi0
>> cpu_cst3: <ACPI CPU C-State> on cpu3
>> cpu_pst3: <ACPI CPU P-State> on cpu3
>> clockmod3: <CPU clock modulation> on cpu3
>> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
>> ACPI: Enabled 4 GPEs in block 00 to 3F
>> pmtimer0 on isa0
>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> ugen3.2: <vendor 0x8087> at usbus3
>> uhub4: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
>> addr 2> on usbus3
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
>> on isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
>> sio0: can't drain, serial port might not exist, disabling
>> sio1: can't drain, serial port might not exist, disabling
>> ppc0: cannot reserve I/O port range
>> hpt27xx: no controller detected.
>> CAM: Configuring 4 busses
>> CAM: finished configuring all busses
>> disk scheduler: set policy of cd0 to noop
>> cd0 at ata2 bus 0 target 0 lun 0
>> cd0: <Slimtype DVD A DL8ATS XAB2> Removable CD-ROM SCSI-0 device
>> cd0: 33.000MB/s transfers
>> cd0: Attempt to query device size failed: NOT READY, Medium not
>> present - tray open
>> uhub4: 8 ports with 8 removable, self powered
>> intr 19 on cpu3 at 40001/40000 hz, livelocked limit engaged!
>> ugen3.3: <vendor 0x05e3> at usbus3
>> uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.64, addr
>> 3> on usbus3
>> uhub0: 6 ports with 6 removable, self powered
>> uhub5: 4 ports with 4 removable, self powered
>> ugen0.2: <vendor 0x8087> at usbus0
>> uhub6: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
>> addr 2> on usbus0
>> ugen3.4: <vendor 0x05e3> at usbus3
>> uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.64, addr
>> 4> on usbus3
>> uhub6: 6 ports with 6 removable, self powered
>> uhub7: 4 ports with 4 removable, self powered
>> ugen0.3: <Logitech> at usbus0
>> ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
>> on usbus0
>> kbd2 at ukbd0
>> ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
>> on usbus0
>> ums0: 16 buttons and [XYZT] coordinates ID=2
>> uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
>> on usbus0
>> ugen3.5: <vendor 0x05e3> at usbus3
>> uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr
>> 5> on usbus3
>> uhub8: 4 ports with 4 removable, self powered
>> no B_DEVMAGIC (bootdev=0)
>> ugen3.6: <vendor 0x05e3> at usbus3
>> uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr
>> 6> on usbus3
>> uhub9: 4 ports with 4 removable, self powered
>> ugen3.7: <HP> at usbus3
>> umass0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00,
>> addr 7> on usbus3
>> disk scheduler: set policy of da8 to noop
>> da8 at umass-sim0 bus 0 target 0 lun 0
>> da8: <HP Photosmart B110 1.00> Removable Direct Access SCSI-5 device
>> da8: 40.000MB/s transfers
>> da8: Attempt to query device size failed: NOT READY, Medium not
>> present
>> Mounting root from hammer:serno/23BBPJN0T.s1d
>> HAMMER(ROOT) recovery check seqno=00233441
>> HAMMER(ROOT) recovery range 300000000a56b9d8-300000000a56b9d8
>> HAMMER(ROOT) recovery nexto 300000000a56b9d8 endseqno=00233442
>> HAMMER(ROOT) mounted clean, no recovery needed
>> DMA space used: 12416k, remaining available: 16384k
>> Mounting devfs
>> ugen3.8: <vendor 0x05e3> at usbus3
>> uhub10: <vendor 0x05e3 USB Hub 2.0, class 9/0, rev 2.00/7.02,
>> addr 8> on usbus3
>> uhub10: 4 ports with 4 removable, self powered
>> ugen3.9: <Prolific Technology Inc.> at usbus3
>> ugen3.10: <Prolific Technology Inc.> at usbus3
>> ugen3.11: <Logitech> at usbus3
>> ums1: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/27.30,
>> addr 11> on usbus3
>> ums1: 8 buttons and [XYZT] coordinates ID=0
>> ugen3.12: <Darfon> at usbus3
>> ukbd1: <Darfon USB Combo Keyboard, class 0/0, rev 1.10/2.02, addr
>> 12> on usbus3
>> kbd3 at ukbd1
>> uhid1: <Darfon USB Combo Keyboard, class 0/0, rev 1.10/2.02, addr
>> 12> on usbus3
>> ulpt0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00, addr
>> 7> on usbus3
>> ulpt0: using bi-directional mode
>> ucom init
>> uplcom0: <Prolific Technology Inc. USB-Serial Controller, class
>> 0/0, rev 1.10/3.00, addr 10> on usbus3
>> attach tty
>> malloc:
>> uplcom1: <Prolific Technology Inc. USB-Serial Controller, class
>> 0/0, rev 1.10/3.00, addr 9> on usbus3
>> attach tty
>> malloc:
>> ugen3.11: <Logitech> at usbus3 (disconnected)
>> ums1: at uhub4, port 4, addr 11 (disconnected)
>> ums1: detached
>> ugen3.12: <Darfon> at usbus3 (disconnected)
>> ukbd1: at uhub4, port 5, addr 12 (disconnected)
>> ukbd1: detached
>> uhid1: at uhub4, port 5, addr 12 (disconnected)
>> uhid1: detached
>>
>> If someone can give me a pointer from what I have provided here
>> that would be great.
>> Thank you for making DragonFly!
>> Cheers,
>> George
>>
>>
>>
>>
>> --
>> Sincerely,
>>
>> Zachary Crownover
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20150309/9bbd4f6c/attachment-0002.html>
More information about the Users
mailing list