Installation of DragonFly 4.0.0 RC

[Mehmet Erol Sanliturk]

On Fri, Oct 31, 2014 at 1:02 AM, Sascha Wildner <saw at online.de> wrote:

> On Thu, 30 Oct 2014 04:09:05 +0100, Mehmet Erol Sanliturk <
> m.e.sanliturk at gmail.com> wrote:
>
>  Dears All ,
>>
>>
>> During installation of DragonFly 4.0.0 RC , the following points may
>> require improvement :
>>
>>
>> 1. USB network cards are NOT recognized during install boot and
>> configuration ( and after
>>    reboot in 3.8.2  by ifconfig )
>>
>
> There could be 2 reasons I can think of:
>
> * If it is a USB3 port, the port might not work at all until xhci(4) is
> loaded. We don't load xhci by default (but I really think we should start
> doing so).
>
> * The adapter is not supported. Right now, we have only 2 drivers (3, if
> you count urndis(4)): axe(4) and udav(4).
>
> What adapter is it that you have?
>
> Sascha
>




Port is USB 2.0 .

Adapter is :

http://www.digitus.info/en/products/network/fast-ethernet-network/network-interface-cards/
http://www.digitus.info/en/products/network/fast-ethernet-network/network-interface-cards/fast-ethernet-usb-20-adapter-dn-10050/

FreeBSD 8 is NOT recognizing but FreeBSD 9 and 10 are recognizing it .

Thank you very much .

Mehmet Erol Sanliturk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20141031/dca3e998/attachment-0001.htm>