Lenovo Y510P test on latest Dfly amd64

bodie bodzart at openbsd.cz
Wed May 21 21:17:32 PDT 2014



On 21.05.2014 18:37, bodie wrote:
> On 21.05.2014 10:02, bodie wrote:
>> On 18.05.2014 06:59, bodie wrote:
>>> On 16.05.2014 22:26, bodie wrote:
>>>> Hi all,
>>>>
>>>> as stated in Subject I tried to boot latest amd64 Dfly, but not
>>>> success. It doesn't go beyond initial boot screen with F1 option 
>>>> for
>>>> boot of Dfly. No error, no boot, nothing, it's just repeating that
>>>> menu on screen. Here at least some output from OpenBSD -current 
>>>> test
>>>> http://marc.info/?l=openbsd-misc&m=140024527331873&w=2 . Is there 
>>>> a
>>>> way how to test it? I can test it for devs to at least boot in 
>>>> live
>>>> system and collect some outputs if I will get past boot menu.
>>>
>>> So got it running on newer snapshot. Questions remain the same as 
>>> on
>>> misc archive for OpenBSD. Regarding disk it will be most 
>>> interesting
>>> to know if there's a chance to get access to internal SSD part of 
>>> that
>>> hybrid disk combo. Will be perfect candidate for use in swapcache 
>>> :-)
>>> Any ideas regarding LAN (https://github.com/markjdb/alx-freebsd),
>>> audio (can't see it in dmesg), but maybe loading module for azalia 
>>> is
>>> enough then and is vga really supported?
>>>
>>> Thanks a lot
>>>
>>> Copyright (c) 2003-2014 The DragonFly Project.
>>> Copyright (c) 1992-2003 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
>>> 1994
>>>         The Regents of the University of California. All rights 
>>> reserved.
>>> DragonFly v3.7.1.1195.gc9774-DEVELOPMENT #0: Sat May 17 12:59:14 
>>> UTC 2014
>>>     
>>> root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
>>> TSC invariant clock: 2194969312 Hz, i8254 clock: 1193210 Hz
>>> CPU: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (2194.93-MHz 
>>> K8-class CPU)
>>>   Origin = "GenuineIntel"  Id = 0x306c3  Stepping = 3
>>>
>>> 
>>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>>
>>> 
>>> Features2=0x77dafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
>>>   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>>>   AMD Features2=0x21<LAHF,ABM>
>>>   Structured Extended
>>> 
>>> Features=0x27ab<GSFSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID>
>>>   Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
>>>   MONITOR/MWAIT Features=0x3<CST,INTBRK>
>>> real memory  = 17092170752 (16300 MB)
>>> avail memory = 16080101376 (15335 MB)
>>> lapic: divisor index 0, frequency 49884692 Hz
>>> Initialize MI interrupts
>>> TSC testing MP synchronization ...
>>> TSC is MP synchronized
>>> TSC: cputimer freq 68591587, shift 5
>>> FQ scheduler policy version 1.1 loaded
>>> wdog: In-kernel automatic watchdog reset enabled
>>> kbd1 at kbdmux0
>>> disk scheduler: set policy of md0 to noop
>>> md0: Malloc disk
>>> ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
>>> ACPI: XSDT 0x000000008CFFE210 0000A4 (v01 LENOVO CB-01    00000001
>>>  01000013)
>>> ACPI: FACP 0x000000008CFF7000 00010C (v05 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: DSDT 0x000000008CFE7000 00C690 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: FACS 0x000000008CFBA000 000040
>>> ACPI: SLIC 0x000000008CFFD000 000176 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: UEFI 0x000000008CFFC000 000236 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: FPDT 0x000000008CFFA000 000044 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: MSDM 0x000000008CFF9000 000055 (v03 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: ASF! 0x000000008CFF8000 0000A5 (v32 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: HPET 0x000000008CFF6000 000038 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: APIC 0x000000008CFF5000 00008C (v03 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: MCFG 0x000000008CFF4000 00003C (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: SSDT 0x000000008CFE6000 000838 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: BOOT 0x000000008CFE4000 000028 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: ASPT 0x000000008CFE2000 000034 (v07 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: DBGP 0x000000008CFE1000 000034 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: SSDT 0x000000008CFD9000 000539 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: SSDT 0x000000008CFD8000 000AD8 (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> ACPI: SSDT 0x000000008CFD4000 00326E (v01 LENOVO CB-01    00000001
>>> ACPI 00040000)
>>> cryptosoft0: <software crypto> on motherboard
>>> aesni0: <AES-CBC,AES-XTS> on motherboard
>>> padlock0: No ACE support.
>>> rdrand0: <RdRand RNG> on motherboard
>>> acpi0: <LENOVO CB-01> on motherboard
>>> ACPI: All ACPI Tables successfully acquired
>>> ACPI FADT: SCI testing interrupt mode ...
>>> ACPI FADT: SCI select level/high
>>> ACPI: Executed 1 blocks of module-level executable AML code
>>> objcache_reclaimlist
>>> objcache_reclaimlist
>>> objcache_reclaimlist
>>> objcache_reclaimlist
>>> acpi0: Power Button (fixed)
>>> Warning: ACPI is disabling APM's device.  You can't run both
>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on 
>>> acpi0
>>> acpi_hpet0: <High Precision Event Timer> iomem 
>>> 0xfed00000-0xfed003ff on acpi0
>>> acpi_hpet0: frequency 14318180
>>> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>> pci0: <ACPI PCI bus> on pcib0
>>> vgapci0: <VGA-compatible display> port 0x4000-0x403f mem
>>> 0x90000000-0x9fffffff,0xa0000000-0xa03fffff irq 16 at device 2.0 on
>>> pci0
>>> agp0: <Haswell mobile GT2 IG> on vgapci0
>>> agp0: aperture size is 256M, detected 32764k stolen memory
>>> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x0c0c) at device 3.0 
>>> irq 16
>>> pci0: <serial bus, USB> (vendor 0x8086, dev 0x8c31) at device 20.0 
>>> irq 16
>>> pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 
>>> 16
>>> ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem
>>> 0xa061d000-0xa061d3ff irq 16 at device 26.0 on pci0
>>> usbus0: waiting for BIOS to give up control
>>> usbus0: EHCI version 1.0
>>> usbus0: <Intel Lynx Point USB 2.0 controller USB-B> on ehci0
>>> pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0 
>>> irq 22
>>> pcib1: <ACPI PCI-PCI bridge> irq 19 at device 28.0 on pci0
>>> pci1: <ACPI PCI bus> on pcib1
>>> pci1: <network, ethernet> (vendor 0x1969, dev 0x10a1) at device 0.0 
>>> irq 19
>>> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>>> pci2: <ACPI PCI bus> on pcib2
>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xa0400000-0xa0401fff 
>>> irq
>>> 16 at device 0.0 on pci2
>>> usbus0: 480Mbps High Speed USB v2.0
>>> ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem
>>> 0xa061c000-0xa061c3ff irq 23 at device 29.0 on pci0
>>> usbus1: waiting for BIOS to give up control
>>> ugen0.1: <Intel> at usbus0
>>> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
>>> usbus0
>>> usbus1: EHCI version 1.0
>>> usbus1: <Intel Lynx Point USB 2.0 controller USB-A> on ehci1
>>> usbus1: 480Mbps High Speed USB v2.0
>>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>>> isa0: <ISA bus> on isab0
>>> ahci0: <AHCI-PCI-SATA> port
>>> 
>>> 0x4060-0x407f,0x4090-0x4093,0x4080-0x4087,0x4094-0x4097,0x4088-0x408f
>>> mem 0xa061b000-0xa061b7ff irq 19 at device 31.2 on pci0
>>> ugen1.1: <Intel> at usbus1
>>> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
>>> usbus1
>>> uhub0: 2 ports with 2 removable, self powered
>>> uhub1: 2 ports with 2 removable, self powered
>>> ugen0.2: <vendor 0x8087> at usbus0
>>> uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, 
>>> addr
>>> 2> on usbus0
>>> ahci0: Intel hocus pocus
>>> ahci0: AHCI 1.3 cap
>>> 0xc730ff43<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<BOH>, 4
>>> ports, 32 tags/port, gen 3 (6Gbps)
>>> ahci0.5: Caps 6<POD,SUD>
>>> ugen1.2: <vendor 0x8087> at usbus1
>>> uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, 
>>> addr
>>> 2> on usbus1
>>> uhub2: 6 ports with 6 removable, self powered
>>> uhub3: 8 ports with 8 removable, self powered
>>> ugen0.3: <vendor 0x8087> at usbus0
>>> ugen1.3: <Generic> at usbus1
>>> ugen1.4: <Kingston> at usbus1
>>> umass0: <Kingston DT 101 II, class 0/0, rev 2.00/2.00, addr 4> on 
>>> usbus1
>>> ugen1.5: <Razer> at usbus1
>>> ums0: <Razer Razer Abyssus, class 0/0, rev 2.00/1.00, addr 5> on 
>>> usbus1
>>> ums0: 7 buttons and [XYZ] coordinates ID=0
>>> ahci0.5: Found DISK "ST1000LM014-1EJ164 LVD3" serial="W380PGFM"
>>> ahci0.5: tags=32/32 satacap=8f0e satacap2=0006 satafea=004c NCQ=YES
>>> capacity=953869.71MB
>>> ahci0.5: f85=3469 f86=bc09 f87=6163 WC=enabled RA=enabled 
>>> SEC=frozen
>>> pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 
>>> 31.3 irq 18
>>> acpi_lid0: <Control Method Lid Switch> on acpi0
>>> acpi_tz0: <Thermal Zone> on acpi0
>>> acpi_button0: <Power Button> on acpi0
>>> acpi_button1: <Sleep Button> on acpi0
>>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on 
>>> acpi0
>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>> kbd0 at atkbd0
>>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>>> psm0: model Generic PS/2 mouse, device ID 0
>>> battery0: <ACPI Control Method Battery> on acpi0
>>> acpi_acad0: <AC Adapter> on acpi0
>>> cpu0: <ACPI CPU> on acpi0
>>> ACPI: Dynamic OEM Table Load:
>>> ACPI: SSDT 0xFFFFFFE1F0E22C00 0003D3 (v01 PmRef  Cpu0Cst  00003001
>>> INTL 20130117)
>>> cpu_cst0: <ACPI CPU C-State> on cpu0
>>> cpu_pst0: <ACPI CPU P-State> on cpu0
>>> clockmod0: <CPU clock modulation> on cpu0
>>> perfbias0: <CPU perf-energy bias> on cpu0
>>> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>>> cpu1: <ACPI CPU> on acpi0
>>> ACPI: Dynamic OEM Table Load:
>>> ACPI: SSDT 0xFFFFFFE1EF715080 0005AA (v01 PmRef  ApIst    00003000
>>> INTL 20130117)
>>> ACPI: Dynamic OEM Table Load:
>>> ACPI: SSDT 0xFFFFFFE0379F96C0 000119 (v01 PmRef  ApCst    00003000
>>> INTL 20130117)
>>> cpu_cst1: <ACPI CPU C-State> on cpu1
>>> cpu_pst1: <ACPI CPU P-State> on cpu1
>>> clockmod1: <CPU clock modulation> on cpu1
>>> perfbias1: <CPU perf-energy bias> on cpu1
>>> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
>>> cpu2: <ACPI CPU> on acpi0
>>> cpu_cst2: <ACPI CPU C-State> on cpu2
>>> cpu_pst2: <ACPI CPU P-State> on cpu2
>>> clockmod2: <CPU clock modulation> on cpu2
>>> perfbias2: <CPU perf-energy bias> on cpu2
>>> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
>>> cpu3: <ACPI CPU> on acpi0
>>> cpu_cst3: <ACPI CPU C-State> on cpu3
>>> cpu_pst3: <ACPI CPU P-State> on cpu3
>>> clockmod3: <CPU clock modulation> on cpu3
>>> perfbias3: <CPU perf-energy bias> on cpu3
>>> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
>>> cpu4: <ACPI CPU> on acpi0
>>> cpu_cst4: <ACPI CPU C-State> on cpu4
>>> cpu_pst4: <ACPI CPU P-State> on cpu4
>>> clockmod4: <CPU clock modulation> on cpu4
>>> perfbias4: <CPU perf-energy bias> on cpu4
>>> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
>>> cpu5: <ACPI CPU> on acpi0
>>> cpu_cst5: <ACPI CPU C-State> on cpu5
>>> cpu_pst5: <ACPI CPU P-State> on cpu5
>>> clockmod5: <CPU clock modulation> on cpu5
>>> perfbias5: <CPU perf-energy bias> on cpu5
>>> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
>>> cpu6: <ACPI CPU> on acpi0
>>> cpu_cst6: <ACPI CPU C-State> on cpu6
>>> cpu_pst6: <ACPI CPU P-State> on cpu6
>>> clockmod6: <CPU clock modulation> on cpu6
>>> perfbias6: <CPU perf-energy bias> on cpu6
>>> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
>>> cpu7: <ACPI CPU> on acpi0
>>> cpu_cst7: <ACPI CPU C-State> on cpu7
>>> cpu_pst7: <ACPI CPU P-State> on cpu7
>>> clockmod7: <CPU clock modulation> on cpu7
>>> perfbias7: <CPU perf-energy bias> on cpu7
>>> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
>>> ACPI: Enabled 7 GPEs in block 00 to 3F
>>> orm0: <Option ROM> at iomem 0xcf000-0xcffff on isa0
>>> pmtimer0 on isa0
>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff 
>>> on isa0
>>> sc0: <System console> at flags 0x100 on isa0
>>> sc0: VGA <16 virtual consoles, flags=0x300>
>>> wbsio1: <Winbond LPC Super I/O W83687THF rev 0x86> at port 
>>> 0x4e-0x4f on isa0
>>> wbsio1: hardware monitor iobase is 0x0
>>> wbsio1: no hardware monitor configured
>>> sio0: can't drain, serial port might not exist, disabling
>>> sio1: can't drain, serial port might not exist, disabling
>>> ppc0: cannot reserve I/O port range
>>> hpt27xx: no controller detected.
>>> CAM: Configuring 2 busses
>>> CAM: finished configuring all busses
>>> disk scheduler: set policy of da8 to noop
>>> disk scheduler: set policy of da0 to noop
>>> da8 at umass-sim0 bus 0 target 0 lun 0
>>> da8: <Kingston DT 101 II 1.00> Removable Direct Access SCSI-2 
>>> device
>>> da8: Serial Number 000FEAFD4177A91187020046
>>> da8: 40.000MB/s transfers
>>> da8: 3832MB (7847936 512 byte sectors: 255H 63S/T 488C)
>>> da0 at ahci0 bus 5 target 0 lun 0
>>> da0: <SATA ST1000LM014-1EJ1 LVD3> Fixed Direct Access SCSI-4 device
>>> da0: Serial Number W380PGFM
>>> da0: 600.000MB/s transfers
>>> da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>>> no B_DEVMAGIC (bootdev=0)
>>> Mounting root from hammer:serno/000FEAFD4177A91187020046.s1d
>>> HAMMER(ROOT) recovery check seqno=00109b35
>>> HAMMER(ROOT) recovery range 30000000018ad9f8-30000000018ad9f8
>>> HAMMER(ROOT) recovery nexto 30000000018ad9f8 endseqno=00109b36
>>> HAMMER(ROOT) mounted clean, no recovery needed
>>> DMA space used: 10164k, remaining available: 16384k
>>> Mounting devfs
>>
>>
>> So wireless doesn't work properly. All modules related to iwn and
>> iwnfw loaded during boot and then here
>> 
>> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html
>> in 30.3.4.1.1 after trying to scan for APs I get "Fatal trap 9:
>> general protection fault while in kernel mode"" coming from
>> ieee80211_ioctl() (sorry don't have more details). It's on latest
>> amd64 snapshot.
>
> Update on snapshot from 21.5.
>
> WiFi is working at least on my home WiFi. That corporate one will
> test tomorrow morning. Except of that:
>
> 1) ums0: <Razer Razer Abyssus, class 0/0, rev 2.00/1.00, addr 5> on 
> usbus1
> ums0: 7 buttons and [XYZ] coordinates ID=0
>
> that mouse stop working in <1 minute in X everytime I start X. Have
> two InputDevices in xorg.conf, one for /dev/sysmouse and one for
> /dev/ums0 and both work, after a while only touchpad on sysmouse is
> working, same if I enable only ums0
>
> 2) X works in VESA - no Intel/KSM for Intel HD4600?


Update for company WiFi network
found initially on OpenBSD - 
http://marc.info/?t=140066409500003&r=1&w=2

So first morning test with DragonflyBSD amd64 snapshot from 21.5.:

arping result is 23 packets transmitted, 21 packets received.
All were returned from only one MAC which is in my arp -a output.
MAC starts on 44:1e:a1 so it's something from HP (?)

In /var/log/messages I can see similar arp related messages as on 
OpenBSD, but
rate is way lower like initial 2 messages, then after 5 minutes 4 
messages
and then already 3 minutes quiet. Try another arping till index=20 
result in
24 transmitted, 21 received, 12% unanswered. Such arping initialized 
another
2 messages in /var/log/messages (they always occur in double)

kernel: arp: GW_IP moved from 44:1e:a1:c2:XX:XX to 44:1e:a1:c2:YY:YY on 
wlan0
kernel: arp: GW_IP moved from 44:1e:a1:c2:YY:YY to 44:1e:a1:c2:XX:XX on 
wlan0

DNS which is GW_IP is returning for ALL internal or external web pages 
of company
always 123.123.123.123 , if I will try external like google.com and 
such they are
translated properly). Interestingly enough after some time at least 
public pages
of company are accessible in firefox 29 browser even as DNS returns 
123.123.123.123
for them.




More information about the Users mailing list