Lenovo Y510P test on latest Dfly amd64

bodie bodzart at openbsd.cz
Sat May 17 21:59:00 PDT 2014

On 16.05.2014 22:26, bodie wrote:
> Hi all,
> as stated in Subject I tried to boot latest amd64 Dfly, but not
> success. It doesn't go beyond initial boot screen with F1 option for
> boot of Dfly. No error, no boot, nothing, it's just repeating that
> menu on screen. Here at least some output from OpenBSD -current test
> http://marc.info/?l=openbsd-misc&m=140024527331873&w=2 . Is there a
> way how to test it? I can test it for devs to at least boot in live
> system and collect some outputs if I will get past boot menu.

So got it running on newer snapshot. Questions remain the same as on 
misc archive for OpenBSD. Regarding disk it will be most interesting to 
know if there's a chance to get access to internal SSD part of that 
hybrid disk combo. Will be perfect candidate for use in swapcache :-) 
Any ideas regarding LAN (https://github.com/markjdb/alx-freebsd), audio 
(can't see it in dmesg), but maybe loading module for azalia is enough 
then and is vga really supported?

Thanks a lot

Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
         The Regents of the University of California. All rights 
DragonFly v3.7.1.1195.gc9774-DEVELOPMENT #0: Sat May 17 12:59:14 UTC 
     root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC invariant clock: 2194969312 Hz, i8254 clock: 1193210 Hz
CPU: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (2194.93-MHz K8-class 
   Origin = "GenuineIntel"  Id = 0x306c3  Stepping = 3
   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
   AMD Features2=0x21<LAHF,ABM>
   Structured Extended 
   Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
real memory  = 17092170752 (16300 MB)
avail memory = 16080101376 (15335 MB)
lapic: divisor index 0, frequency 49884692 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 68591587, shift 5
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x000000008CFFE210 0000A4 (v01 LENOVO CB-01    00000001      
ACPI: FACP 0x000000008CFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 
ACPI: DSDT 0x000000008CFE7000 00C690 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: FACS 0x000000008CFBA000 000040
ACPI: SLIC 0x000000008CFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: UEFI 0x000000008CFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: FPDT 0x000000008CFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: MSDM 0x000000008CFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 
ACPI: ASF! 0x000000008CFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 
ACPI: HPET 0x000000008CFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: APIC 0x000000008CFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 
ACPI: MCFG 0x000000008CFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 
ACPI: SSDT 0x000000008CFE6000 000838 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: BOOT 0x000000008CFE4000 000028 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: ASPT 0x000000008CFE2000 000034 (v07 LENOVO CB-01    00000001 ACPI 
ACPI: DBGP 0x000000008CFE1000 000034 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: SSDT 0x000000008CFD9000 000539 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: SSDT 0x000000008CFD8000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 
ACPI: SSDT 0x000000008CFD4000 00326E (v01 LENOVO CB-01    00000001 ACPI 
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
acpi0: <LENOVO CB-01> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
acpi_hpet0: frequency 14318180
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 
0x90000000-0x9fffffff,0xa0000000-0xa03fffff irq 16 at device 2.0 on pci0
agp0: <Haswell mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x0c0c) at device 3.0 irq 
pci0: <serial bus, USB> (vendor 0x8086, dev 0x8c31) at device 20.0 irq 
pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 16
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 
0xa061d000-0xa061d3ff irq 16 at device 26.0 on pci0
usbus0: waiting for BIOS to give up control
usbus0: EHCI version 1.0
usbus0: <Intel Lynx Point USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0 irq 
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network, ethernet> (vendor 0x1969, dev 0x10a1) at device 0.0 irq 
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Wireless-N 2230> mem 0xa0400000-0xa0401fff irq 16 
at device 0.0 on pci2
usbus0: 480Mbps High Speed USB v2.0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 
0xa061c000-0xa061c3ff irq 23 at device 29.0 on pci0
usbus1: waiting for BIOS to give up control
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
usbus1: EHCI version 1.0
usbus1: <Intel Lynx Point USB 2.0 controller USB-A> on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 
mem 0xa061b000-0xa061b7ff irq 19 at device 31.2 on pci0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> 
on usbus0
ahci0: Intel hocus pocus
ahci0: AHCI 1.3 cap 0xc730ff43<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> 
cap2 0x4<BOH>, 4 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.5: Caps 6<POD,SUD>
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> 
on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x8087> at usbus0
ugen1.3: <Generic> at usbus1
ugen1.4: <Kingston> at usbus1
umass0: <Kingston DT 101 II, class 0/0, rev 2.00/2.00, addr 4> on 
ugen1.5: <Razer> at usbus1
ums0: <Razer Razer Abyssus, class 0/0, rev 2.00/1.00, addr 5> on usbus1
ums0: 7 buttons and [XYZ] coordinates ID=0
ahci0.5: Found DISK "ST1000LM014-1EJ164 LVD3" serial="W380PGFM"
ahci0.5: tags=32/32 satacap=8f0e satacap2=0006 satafea=004c NCQ=YES 
ahci0.5: f85=3469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3 
irq 18
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1F0E22C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1EF715080 0005AA (v01 PmRef  ApIst    00003000 INTL 
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0379F96C0 000119 (v01 PmRef  ApCst    00003000 INTL 
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
cpu4: <ACPI CPU> on acpi0
cpu_cst4: <ACPI CPU C-State> on cpu4
cpu_pst4: <ACPI CPU P-State> on cpu4
clockmod4: <CPU clock modulation> on cpu4
perfbias4: <CPU perf-energy bias> on cpu4
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
cpu5: <ACPI CPU> on acpi0
cpu_cst5: <ACPI CPU C-State> on cpu5
cpu_pst5: <ACPI CPU P-State> on cpu5
clockmod5: <CPU clock modulation> on cpu5
perfbias5: <CPU perf-energy bias> on cpu5
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
cpu6: <ACPI CPU> on acpi0
cpu_cst6: <ACPI CPU C-State> on cpu6
cpu_pst6: <ACPI CPU P-State> on cpu6
clockmod6: <CPU clock modulation> on cpu6
perfbias6: <CPU perf-energy bias> on cpu6
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
cpu7: <ACPI CPU> on acpi0
cpu_cst7: <ACPI CPU C-State> on cpu7
cpu_pst7: <ACPI CPU P-State> on cpu7
clockmod7: <CPU clock modulation> on cpu7
perfbias7: <CPU perf-energy bias> on cpu7
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
ACPI: Enabled 7 GPEs in block 00 to 3F
orm0: <Option ROM> at iomem 0xcf000-0xcffff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
wbsio1: <Winbond LPC Super I/O W83687THF rev 0x86> at port 0x4e-0x4f on 
wbsio1: hardware monitor iobase is 0x0
wbsio1: no hardware monitor configured
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: cannot reserve I/O port range
hpt27xx: no controller detected.
CAM: Configuring 2 busses
CAM: finished configuring all busses
disk scheduler: set policy of da8 to noop
disk scheduler: set policy of da0 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Kingston DT 101 II 1.00> Removable Direct Access SCSI-2 device
da8: Serial Number 000FEAFD4177A91187020046
da8: 40.000MB/s transfers
da8: 3832MB (7847936 512 byte sectors: 255H 63S/T 488C)
da0 at ahci0 bus 5 target 0 lun 0
da0: <SATA ST1000LM014-1EJ1 LVD3> Fixed Direct Access SCSI-4 device
da0: Serial Number W380PGFM
da0: 600.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/000FEAFD4177A91187020046.s1d
HAMMER(ROOT) recovery check seqno=00109b35
HAMMER(ROOT) recovery range 30000000018ad9f8-30000000018ad9f8
HAMMER(ROOT) recovery nexto 30000000018ad9f8 endseqno=00109b36
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 10164k, remaining available: 16384k
Mounting devfs

More information about the Users mailing list