System no response problem

Tue Feb 25 00:35:55 PST 2014

dmesg:
Copyright (c) 2003-2013 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
MPTABLE: warning duplicated PCI int entry for bus 2, dev 0, pin 0
MPTABLE: warning duplicated PCI int entry for bus 2, dev 0, pin 1
MPTABLE: warning duplicated PCI int entry for bus 2, dev 0, pin 2
MPTABLE: warning duplicated PCI int entry for bus 2, dev 0, pin 3
DragonFly v3.6.0.32.g5d744-RELEASE #0: Wed Feb 19 16:32:44 CST 2014
lhm at reli.com:/usr/obj/usr/src/sys/lhmwzy
TSC clock: 1595969560 Hz, i8254 clock: 1193166 Hz
CPU: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz (1596.00-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 2135926784 (2036 MB)
avail memory = 1989926912 (1897 MB)
lapic: divisor index 0, frequency 99749671 Hz
Initialize MI interrupts
VMM: VMX is not supported by this Intel CPU
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd1 at kbdmux0
ACPI: RSDP 0xfebf0 00024 (v02 DELL )
ACPI: XSDT 0xfd033 0007C (v01 DELL B9K 0000000D ASL 00000061)
ACPI: FACP 0xfd153 000F4 (v03 DELL B9K 0000000D ASL 00000061)
ACPI: DSDT 0xfff5db8e 03315 (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 0x7f55ac00 00040
ACPI: SSDT 0xfff60fc4 000AC (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 0xfd247 00092 (v01 DELL B9K 0000000D ASL 00000061)
ACPI: BOOT 0xfd2d9 00028 (v01 DELL B9K 0000000D ASL 00000061)
ACPI: ASF! 0xfd301 00092 (v32 DELL B9K 0000000D ASL 00000061)
ACPI: MCFG 0xfd393 0003E (v01 DELL B9K 0000000D ASL 00000061)
ACPI: HPET 0xfd3d1 00038 (v01 DELL B9K 0000000D ASL 00000061)
ACPI: SLIC 0xfd409 000C0 (v01 DELL B9K 0000000D ASL 00000061)
ACPI: SSDT 0x7f55ac40 00175 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 0x7f55b049 00175 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 0x7f55b452 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL B9K > on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xecd8-0xecdf mem
0xdff00000-0xdfffffff,0xc0000000-0xcfffffff,0xdfe00000-0xdfe7ffff irq 16 at
device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7164k stolen memory
vgapci1: <VGA-compatible display> mem 0xdfe80000-0xdfefffff at device 2.1
on pci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 16
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5787 Gigabit Ethernet> mem 0xdfbf0000-0xdfbfffff irq 16
at device 0.0 on pci2
bge0: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5787 10/100/1000baseT PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: MAC address: 00:1d:09:09:00:51
uhci0: <Intel 82801G (ICH7) USB controller> port 0xff80-0xff9f irq 21 at
device 29.0 on pci0
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801G (ICH7) USB controller> port 0xff60-0xff7f irq 22 at
device 29.1 on pci0
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801G (ICH7) USB controller> port 0xff40-0xff5f irq 18 at
device 29.2 on pci0
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801G (ICH7) USB controller> port 0xff20-0xff3f irq 23 at
device 29.3 on pci0
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xff980800-0xff980bff irq
21 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ahci0: <AHCI-PCI-SATA> port
0xfec0-0xfecf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 mem
0xff970000-0xff9703ff irq 20 at device 31.2 on pci0
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on uhub0
kbd2 at ukbd0
ahci0: Intel hocus pocus
ahci0: AHCI 1.1 cap 0xc720ff03<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC>, 4
ports, 32 tags/port, gen 2 (3Gbps)
ahci0.0: Caps 6<POD,SUD>
ahci0.1: Caps 6<POD,SUD>
ahci0.2: Caps 6<POD,SUD>
ahci0.3: Caps 6<POD,SUD>
ahci0.0: Found DISK "ST3160815AS 3.ADA" serial="5RX1G47G"
ahci0.0: tags=32/32 satacap=0506 satafea=0040 NCQ=YES capacity=152587.89MB
ahci0.0: f85=3469 f86=3401 f87=4023 WC=enabled RA=enabled SEC=frozen
ahci0.1: Found ATAPI "TSSTcorp CD-RW/DVD-ROM TS-H493B D200" serial=""
ahci0.1: tags=0/32 satacap=0402 satafea=0040 NCQ=NO capacity=1.00MB
ahci0.1: f85=0000 f86=0001 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
ahci0.2: No device detected
ahci0.3: No device detected
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 17
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
orm0: <Option ROMs> at iomem
0xc0000-0xcb7ff,0xcb800-0xcd7ff,0xcd800-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
CAM: Configuring 6 busses
CAM: finished configuring all busses
no B_DEVMAGIC (bootdev=0)
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of cd0 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA ST3160815AS 3.AD> Fixed Direct Access SCSI-4 device
da0: Serial Number 5RX1G47G
da0: 300.000MB/s transfers
da0: 152587MB (312500000 512 byte sectors: 255H 63S/T 19452C)
cd0 at ahci0 bus 1 target 0 lun 0
cd0: <TSSTcorp CDRWDVD TS-H493B D200> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
Mounting root from hammer:serno/5RX1G47G.s1d
HAMMER(ROOT) recovery check seqno=00ab2b50
HAMMER(ROOT) recovery range 300000001a49efe0-300000001a49efe0
HAMMER(ROOT) recovery nexto 300000001a49efe0 endseqno=00ab2b51
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 6200k, remaining available: 16384k
Mounting devfs

I think I might be caused by run out of memory.

When run make buildworld,make kernel,make installword,the memory is almost
use out and can't be released automatically,thus the memory and the swap
useage is more and more.Finally the memory is used out and
"swap_pager: indefinite wait buffer: offset: 416837632,size:4096" is out.

2014-02-25 15:32 GMT+08:00 lhmwzy <lhmwzy at gmail.com>:

> Unless reboot,everything will not function normal.
> The box installed DragonFly BSD 3.6.
> Or the hard disk is going to bad?
>
>
> 2014-02-25 15:09 GMT+08:00 lhmwzy <lhmwzy at gmail.com>:
>
> It was happened when insert datas to mysql database.
>>
>>
>> 2014-02-25 15:07 GMT+08:00 lhmwzy <lhmwzy at gmail.com>:
>>
>> It has serveral times run into no responese problem.
>>> the console messages are:
>>> cache_lock blocked on 0xffffffe085065430 80000001 "blocklist.RSA-2048"
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> swap_pager: indefinite wait buffer: offset: 416837632,size:4096
>>> .....
>>>
>>> nodump and can't login in through ssh or console.
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20140225/44c67ec4/attachment-0003.html>