installed but no network

[Ludo Beckers]

Rebooted and did
pkg upgrade

It's working!
:-)
Thanks thanks thanks!

Ludo
www.potingue.be


On Fri, Apr 4, 2014 at 1:35 PM, Ludo Beckers <lazylew at gmail.com> wrote:

> <Do you know your network?  typically it starts with 192.168.0,
> 192.168.1, 10.0.0, etc, and the nameserver is the ".1" address.
>
> That is exactly what I can't figure out.
>
> If a reboot doesn't work, I'll study this >
> http://www.dragonflybsd.org/docs/newhandbook/Configuration/#index8h2before getting everyone annoyed here...
>
> Ludo
> www.potingue.be
>
>
> On Fri, Apr 4, 2014 at 1:30 PM, John Marino <dragonflybsd at marino.st>wrote:
>
>>
>>
>> On 4/4/2014 13:24, Ludo Beckers wrote:
>> > <We are getting back into hand-holding territory here
>> >
>> > I know, sorry about that :-/
>> >
>> > I found nfe0 is correct here, so I adapted the rc.conf accordingly.
>> >
>> > resolv.conf reads: search be
>>
>> Like Pierre and I mentioned, you need a "nameserver" line.
>> Do you know your network?  typically it starts with 192.168.0,
>> 192.168.1, 10.0.0, etc, and the nameserver is the ".1" address.
>>
>> >
>> > I hope I have the right documentation here to study?
>> > http://www.dragonflybsd.org/docs/newhandbook/Configuration/#index8h2
>>
>> seems pretty reasonable, that should be a good start.
>> John
>>
>>
>> >
>> >
>> > Ludo
>> > www.potingue.be <http://www.potingue.be>
>> >
>> >
>> > On Fri, Apr 4, 2014 at 1:09 PM, John Marino <dragonflybsd at marino.st
>> > <mailto:dragonflybsd at marino.st>> wrote:
>> >
>> >     We are getting back into hand-holding territory here, this must be
>> >     mentioned in "setting up networking" tutorials.
>> >
>> >     Your issue may be the value in /etc/resolv.conf
>> >
>> >     As a example, mine looks like this:
>> >     # cat /etc/resolv.conf
>> >     nameserver 192.168.0.1
>> >
>> >     You might want to use "ipconfig" to verify that your network card is
>> >     "em0", I didn't how how Sascha knew that.
>> >
>> >     John
>> >
>> >
>> >     On 4/4/2014 13:00, Ludo Beckers wrote:
>> >     > I added it to the end of rc.conf (btw emZERO, correct?) and then
>> did
>> >     > ping avalon.dragonflybsd.org <http://avalon.dragonflybsd.org>
>> >     <http://avalon.dragonflybsd.org>
>> >     > and got Host name lookup failure.
>> >     >
>> >     > Ludo
>> >     > www.potingue.be <http://www.potingue.be> <http://www.potingue.be>
>> >     >
>> >     >
>> >     > On Fri, Apr 4, 2014 at 12:33 PM, Sascha Wildner <saw at online.de
>> >     <mailto:saw at online.de>
>> >     > <mailto:saw at online.de <mailto:saw at online.de>>> wrote:
>> >     >
>> >     >     On Fri, 04 Apr 2014 11:42:00 +0200, Ludo Beckers
>> >     <lazylew at gmail.com <mailto:lazylew at gmail.com>
>> >     >     <mailto:lazylew at gmail.com <mailto:lazylew at gmail.com>>> wrote:
>> >     >
>> >     >         It clearly shows I hadn't a clue what I was doing when
>> >     trying to
>> >     >         set up the
>> >     >         network.
>> >     >         Is there something I should retry with the CD first, or
>> >     >         otherwise can
>> >     >         someone send me the link for the right documentation
>> (Network
>> >     >         for Dummies?)
>> >     >         please?
>> >     >
>> >     >
>> >     >     Try putting ifconfig_em0="DHCP" into /etc/rc.conf (assuming
>> you
>> >     >     configured an Intel card in the guest)
>> >     >
>> >     >
>> >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20140404/0ce48cb1/attachment-0003.htm>