3.4.3 also (Re: (x86_64) 3.6.0 ifconfig bge0 gives Fatal trap 19.

[Makoto Fujiwara]

| From: Sepherosa Ziehau <sepherosa at gmail.com>
| Subject: Re: (x86_64) 3.6.0 ifconfig bge0 gives Fatal trap 19.
| Date: Tue, 3 Dec 2013 13:50:18 +0800

> Sounds like ASF problem.  Is it possible to disable ASF from BIOS?
Do you mean Alert Standard Format ?
I could not find any related words in BIOS setup, sorry.

HP machines has iLO, Internal Light Out. Sub small CPU will
monitor and control whole machine. (But not for Interrupt).

Another thing I need to report is that
 dfly-i386-3.4.3_REL.img.bz2
has the same situation.
(To be honest, I'm quite new to DragonFlyBSD ;-)
---
Makoto Fujiwara, 
Chiba, Japan, Narita Airport and Disneyland prefecture.



Copyright (c) 2003-2013 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly v3.4.3-RELEASE #0: Wed Aug 28 01:55:49 UTC 2013
    root@:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2128021776 Hz, i8254 clock: 1193194 Hz
CPU: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz (2128.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
real memory  = 1071670272 (1022 MB)
avail memory = 1015721984 (968 MB)
lapic: divisor index 0, frequency 133000530 Hz
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0xf4f00 00024 (v02 HP    )
ACPI: XSDT 0x3fe667c0 00074 (v01 HP     ProLiant 00000002   ?? 0000162E)
ACPI: FACP 0x3fe66840 000F4 (v03 HP     ProLiant 00000002   ?? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-710)
ACPI: DSDT 0x3fe66940 02D63 (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 0x3fe66100 00040
ACPI: SPCR 0x3fe66140 00050 (v01 HP     SPCRRBSU 00000001   ?? 0000162E)
ACPI: MCFG 0x3fe661c0 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 0x3fe66200 00038 (v01 HP     ProLiant 00000002   ?? 0000162E)
ACPI: SPMI 0x3fe66240 00040 (v05 HP     ProLiant 00000001   ?? 0000162E)
ACPI: ERST 0x3fe66280 001D0 (v01 HP     ProLiant 00000001   ?? 0000162E)
ACPI: APIC 0x3fe66480 00092 (v01 HP     ProLiant 00000002      00000000)
ACPI: FFFF 0x3fe66540 00176 (v01 HP     ProLiant 00000001   ?? 0000162E)
ACPI: BERT 0x3fe666c0 00030 (v01 HP     ProLiant 00000001   ?? 0000162E)
ACPI: HEST 0x3fe66700 000BC (v01 HP     ProLiant 00000001   ?? 0000162E)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci21: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci21
pci24: <ACPI PCI bus> on pcib2
pcib2: No _PRT found, routing with pci
pcib3: <MPTABLE PCI-PCI bridge> at device 4.0 on pci24
pci25: <PCI bus> on pcib3
ciss0: <HP Smart Array E200> port 0x4000-0x40ff mem 0xfdf70000-0xfdf77fff,0xfdf80000-0xfdffffff irq 16 at device 8.0 on pci24
ciss0: PERFORMANT Transport
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci18: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib6
bge0: <Broadcom BCM5715 Gigabit Ethernet> mem 0xfdee0000-0xfdeeffff,0xfdef0000-0xfdefffff irq 16 at device 4.0 on pci3
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:24:81:00:91:14
bge1: <Broadcom BCM5715 Gigabit Ethernet> mem 0xfdec0000-0xfdecffff,0xfded0000-0xfdedffff irq 17 at device 4.1 on pci3
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseT PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: MAC address: 00:24:81:00:91:15
pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci7: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci10: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci13: <ACPI PCI bus> on pcib10
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1000-0x101f irq 21 at device 29.0 on pci0
usb0: <Intel 82801I (ICH9) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1020-0x103f irq 21 at device 29.1 on pci0
usb1: <Intel 82801I (ICH9) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1040-0x105f irq 21 at device 29.2 on pci0
usb2: <Intel 82801I (ICH9) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1060-0x107f irq 21 at device 29.3 on pci0
usb3: <Intel 82801I (ICH9) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdbf0000-0xfdbf03ff irq 21 at device 29.7 on pci0
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub4
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xfddf0000-0xfddfffff,0xd8000000-0xdfffffff irq 21 at device 2.0 on pci1
pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 22
pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 23
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 23 at device 4.4 on pci1
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
pci1: <serial bus> (vendor 0x103c, dev 0x3302) at device 4.6 irq 22
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0x10b0-0x10bf,0x10a0-0x10af,0x1098-0x109b,0x1090-0x1097,0x1088-0x108b,0x1080-0x1087 irq 20 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <Intel ICH9 SATA300 controller> port 0x10f0-0x10ff,0x10e0-0x10ef,0x10d8-0x10db,0x10d0-0x10d7,0x10c8-0x10cb,0x10c0-0x10c7 irq 20 at device 31.5 on pci0
ata4: <ATA channel 0> on atapci1
ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
kbd2 at ukbd0
ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
ums0: 3 buttons
ukbd1: <CHICONY HP Basic USB Keyboard - JP, class 0/0, rev 1.10/3.00, addr 2> on uhub2
kbd3 at ukbd1
disk scheduler: set policy of acd0 to noop
acd0: DVDROM <HL-DT-STDVD-ROM GDR-R10N/2.02> at ata4-master UDMA33
ata5: <ATA channel 1> on atapci1
acpi_tz0: <Thermal Zone> on acpi0
[ACPI Debug]  String [0x0B] "_CRT Method"
[ACPI Debug]  String [0x0B] "_PSV Method"
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550, console
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
ppc0: parallel port not found.
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_CRT Method"
[ACPI Debug]  String [0x0B] "_PSV Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_CRT Method"
[ACPI Debug]  String [0x0B] "_PSV Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
hpt27xx: no controller detected.
CAM: Configuring 7 busses
(probe31:umass-sim0:0:0:0): Uninitialized Transport 5:cea31380?
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of da8 to noop
disk scheduler: set policy of cd0 to noop
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-5 device 
da0: Serial Number PA6C90P9SWW1Q2
da0: 135.168MB/s transfers
da0: Command Queueing Enabled
da0: 228858MB (468702240 512 byte sectors: 255H 32S/T 57439C)
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device 
da8: 40.000MB/s transfers
da8: 7691MB (15751168 512 byte sectors: 255H 63S/T 980C)
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDR-R10N 2.02> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:da8s1a
DMA space used: 912k, remaining available: 16384k
Mounting devfs
Loading configuration files.
Loading devfs rules: /etc/defaults/devfs.conf.
Initializing random seed: done. 
Starting file system checks:
/dev/da8s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da8s1a: clean, 644567 free (327 frags, 80530 blocks, 0.0% fragmentation)

Setting hostname: .
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet 127.0.0.1 netmask 0xff000000 
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 
Additional routing options:.
hw.bus.devctl_disable: 0 -> 1
Generating nsswitch.conf.
Generating host.conf.
Mounting NFS file systems:.
Building databases...
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/pkg/lib /usr/local/lib
[ACPI Debug]  String [0x0B] "_TMP Method"
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
sendmail_submit: /etc/mail/aliases.db not present, generating
/etc/mail/aliases: 29 aliases, longest 10 bytes, 292 bytes total
Additional ABI support:.
Local package initialization:.
Additional TCP options:.
Starting pfi...
Looking for pfi.conf on /dev/acd0...mount_cd9660: /dev/acd0: Invalid argument
 not found
Looking for pfi.conf on /dev/cd0...mount_cd9660: /dev/cd0: Invalid argument
 not found
Looking for pfi.conf on /dev/da0s1...mount_msdos: /dev/da0s1: Invalid argument
 not found
Looking for pfi.conf on /dev/da8s1...mount_msdos: /dev/da8s1: Invalid argument
 not found

Tue Dec  3 06:21:29 UTC 2013
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
Welcome to DragonFly!

To start the installer, login as 'installer'.  To just get a shell prompt,
login as 'root'.

DragonFly/i386 (Amnesiac) (console)

login: root
Last login: Tue Dec  3 06:21:42 2013 on ttyv0
Copyright (c) 2003-2013 The DragonFly Project.
Copyright (c) 19[ACPI Debug]  String [0x0B] "_TMP Method"
92-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.

DragonFly v3.4.3-RELEASE (GENERIC) #0: Wed Aug 28 01:55:49 UTC 2013

Welcome to DragonFly!

# ifconfig bge0 192.168.1.1
NMI ISA a1, EISA ff
RAM parity error, likely hardware failure.

Fatal trap 19: non-maskable interrupt trap while in kernel mode
cpuid = 0; lapic.id = 00000000
instruction pointer     = 0x8:0xc0254cce
stack pointer           = 0x10:0xcf000cb8
frame pointer           = 0x10:0xff800000
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, IOPL = 0
current process         = Idle
current thread          = pri 28 (CRIT)
 <- SMP: XXX
kernel: type 19 trap, code=0

CPU0 stopping CPUs: 0x0000000e
 stopped
Stopped at      bge_link_poll+0x23:     testl   %eax,0x6190(%ecx)
db> trace
bge_link_poll(0,182,0,ff8007f4,ce982d88) at bge_link_poll+0x23 0xc0254cce
intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4
intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4
intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4
...
... (looks infinite)...