3.4.3 also (Re: (x86_64) 3.6.0 ifconfig bge0 gives Fatal trap 19.

Sepherosa Ziehau sepherosa at gmail.com
Tue Dec 3 03:58:53 PST 2013


Hi,

I have commit the ASF support (obtained from FreeBSD) to master.  Please
try the snapshot at
http://mirror-master.dragonflybsd.org/snapshots/x86_64/images/

The image contains the fix (57b622244562b2b67b60bc5eeecd498f5946d359)
probably will pop up tomorrow.

Best Regards,
sephe

On Tue, Dec 3, 2013 at 2:55 PM, Makoto Fujiwara <makoto at ki.nu> wrote:

> | From: Sepherosa Ziehau <sepherosa at gmail.com>
> | Subject: Re: (x86_64) 3.6.0 ifconfig bge0 gives Fatal trap 19.
> | Date: Tue, 3 Dec 2013 13:50:18 +0800
>
> > Sounds like ASF problem.  Is it possible to disable ASF from BIOS?
> Do you mean Alert Standard Format ?
> I could not find any related words in BIOS setup, sorry.
>
> HP machines has iLO, Internal Light Out. Sub small CPU will
> monitor and control whole machine. (But not for Interrupt).
>
> Another thing I need to report is that
>  dfly-i386-3.4.3_REL.img.bz2
> has the same situation.
> (To be honest, I'm quite new to DragonFlyBSD ;-)
> ---
> Makoto Fujiwara,
> Chiba, Japan, Narita Airport and Disneyland prefecture.
>
>
>
> Copyright (c) 2003-2013 The DragonFly Project.
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> DragonFly v3.4.3-RELEASE #0: Wed Aug 28 01:55:49 UTC 2013
>     root@:/usr/obj/usr/src/sys/GENERIC
> TSC clock: 2128021776 Hz, i8254 clock: 1193194 Hz
> CPU: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz (2128.02-MHz
> 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20000000<LM>
>   AMD Features2=0x1<LAHF>
> real memory  = 1071670272 (1022 MB)
> avail memory = 1015721984 (968 MB)
> lapic: divisor index 0, frequency 133000530 Hz
> Initialize MI interrupts
> FQ scheduler policy version 1.1 loaded
> wdog: In-kernel automatic watchdog reset enabled
> kbd1 at kbdmux0
> disk scheduler: set policy of md0 to noop
> md0: Malloc disk
> ACPI: RSDP 0xf4f00 00024 (v02 HP    )
> ACPI: XSDT 0x3fe667c0 00074 (v01 HP     ProLiant 00000002   ?? 0000162E)
> ACPI: FACP 0x3fe66840 000F4 (v03 HP     ProLiant 00000002   ?? 0000162E)
> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
> (20110527/tbfadt-710)
> ACPI: DSDT 0x3fe66940 02D63 (v01 HP         DSDT 00000001 INTL 20030228)
> ACPI: FACS 0x3fe66100 00040
> ACPI: SPCR 0x3fe66140 00050 (v01 HP     SPCRRBSU 00000001   ?? 0000162E)
> ACPI: MCFG 0x3fe661c0 0003C (v01 HP     ProLiant 00000001      00000000)
> ACPI: HPET 0x3fe66200 00038 (v01 HP     ProLiant 00000002   ?? 0000162E)
> ACPI: SPMI 0x3fe66240 00040 (v05 HP     ProLiant 00000001   ?? 0000162E)
> ACPI: ERST 0x3fe66280 001D0 (v01 HP     ProLiant 00000001   ?? 0000162E)
> ACPI: APIC 0x3fe66480 00092 (v01 HP     ProLiant 00000002      00000000)
> ACPI: FFFF 0x3fe66540 00176 (v01 HP     ProLiant 00000001   ?? 0000162E)
> ACPI: BERT 0x3fe666c0 00030 (v01 HP     ProLiant 00000001   ?? 0000162E)
> ACPI: HEST 0x3fe66700 000BC (v01 HP     ProLiant 00000001   ?? 0000162E)
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> Using XMM optimized bcopy/copyin/copyout
> cryptosoft0: <software crypto> on motherboard
> acpi0: <HP ProLiant> on motherboard
> ACPI FADT: SCI testing interrupt mode ...
> ACPI FADT: SCI select level/high
> objcache_reclaimlist
> objcache_reclaimlist
> objcache_reclaimlist
> objcache_reclaimlist
> acpi0: Power Button (fixed)
> Warning: ACPI is disabling APM's device.  You can't run both
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> acpi_hpet0: frequency 14318180
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci21: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci21
> pci24: <ACPI PCI bus> on pcib2
> pcib2: No _PRT found, routing with pci
> pcib3: <MPTABLE PCI-PCI bridge> at device 4.0 on pci24
> pci25: <PCI bus> on pcib3
> ciss0: <HP Smart Array E200> port 0x4000-0x40ff mem
> 0xfdf70000-0xfdf77fff,0xfdf80000-0xfdffffff irq 16 at device 8.0 on pci24
> ciss0: PERFORMANT Transport
> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci18: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci2
> pci3: <ACPI PCI bus> on pcib6
> bge0: <Broadcom BCM5715 Gigabit Ethernet> mem
> 0xfdee0000-0xfdeeffff,0xfdef0000-0xfdefffff irq 16 at device 4.0 on pci3
> bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5714 10/100/1000baseT PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge0: MAC address: 00:24:81:00:91:14
> bge1: <Broadcom BCM5715 Gigabit Ethernet> mem
> 0xfdec0000-0xfdecffff,0xfded0000-0xfdedffff irq 17 at device 4.1 on pci3
> bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5714 10/100/1000baseT PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge1: MAC address: 00:24:81:00:91:15
> pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0
> pci4: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 28.3 on pci0
> pci7: <ACPI PCI bus> on pcib8
> pcib9: <ACPI PCI-PCI bridge> at device 28.4 on pci0
> pci10: <ACPI PCI bus> on pcib9
> pcib10: <ACPI PCI-PCI bridge> at device 28.5 on pci0
> pci13: <ACPI PCI bus> on pcib10
> uhci0: <Intel 82801I (ICH9) USB controller> port 0x1000-0x101f irq 21 at
> device 29.0 on pci0
> usb0: <Intel 82801I (ICH9) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801I (ICH9) USB controller> port 0x1020-0x103f irq 21 at
> device 29.1 on pci0
> usb1: <Intel 82801I (ICH9) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801I (ICH9) USB controller> port 0x1040-0x105f irq 21 at
> device 29.2 on pci0
> usb2: <Intel 82801I (ICH9) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801I (ICH9) USB controller> port 0x1060-0x107f irq 21 at
> device 29.3 on pci0
> usb3: <Intel 82801I (ICH9) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdbf0000-0xfdbf03ff irq
> 21 at device 29.7 on pci0
> usb4: waiting for BIOS to give up control
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
> uhub4: 8 ports with 8 removable, self powered
> umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on
> uhub4
> pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib11
> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
> 0xfddf0000-0xfddfffff,0xd8000000-0xdfffffff irq 21 at device 2.0 on pci1
> pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 22
> pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 23
> uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 23 at device
> 4.4 on pci1
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> pci1: <serial bus> (vendor 0x103c, dev 0x3302) at device 4.6 irq 22
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH9 SATA300 controller> port
> 0x10b0-0x10bf,0x10a0-0x10af,0x1098-0x109b,0x1090-0x1097,0x1088-0x108b,0x1080-0x1087
> irq 20 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> atapci1: <Intel ICH9 SATA300 controller> port
> 0x10f0-0x10ff,0x10e0-0x10ef,0x10d8-0x10db,0x10d0-0x10d7,0x10c8-0x10cb,0x10c0-0x10c7
> irq 20 at device 31.5 on pci0
> ata4: <ATA channel 0> on atapci1
> ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
> kbd2 at ukbd0
> ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
> ums0: 3 buttons
> ukbd1: <CHICONY HP Basic USB Keyboard - JP, class 0/0, rev 1.10/3.00, addr
> 2> on uhub2
> kbd3 at ukbd1
> disk scheduler: set policy of acd0 to noop
> acd0: DVDROM <HL-DT-STDVD-ROM GDR-R10N/2.02> at ata4-master UDMA33
> ata5: <ATA channel 1> on atapci1
> acpi_tz0: <Thermal Zone> on acpi0
> [ACPI Debug]  String [0x0B] "_CRT Method"
> [ACPI Debug]  String [0x0B] "_PSV Method"
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> device_probe_and_attach: atkbd0 attach returned 6
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550, console
> cpu0: <ACPI CPU> on acpi0
> cpu_cst0: <ACPI CPU C-State> on cpu0
> cpu1: <ACPI CPU> on acpi0
> cpu_cst1: <ACPI CPU C-State> on cpu1
> cpu2: <ACPI CPU> on acpi0
> cpu_cst2: <ACPI CPU C-State> on cpu2
> cpu3: <ACPI CPU> on acpi0
> cpu_cst3: <ACPI CPU C-State> on cpu3
> orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
> pmtimer0 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> sio2 at port 0x2f8-0x2ff irq 3 on isa0
> sio2: type 16550A
> ppc0: parallel port not found.
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_CRT Method"
> [ACPI Debug]  String [0x0B] "_PSV Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_CRT Method"
> [ACPI Debug]  String [0x0B] "_PSV Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> hpt27xx: no controller detected.
> CAM: Configuring 7 busses
> (probe31:umass-sim0:0:0:0): Uninitialized Transport 5:cea31380?
> CAM: finished configuring all busses
> disk scheduler: set policy of da0 to noop
> disk scheduler: set policy of da8 to noop
> disk scheduler: set policy of cd0 to noop
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-5 device
> da0: Serial Number PA6C90P9SWW1Q2
> da0: 135.168MB/s transfers
> da0: Command Queueing Enabled
> da0: 228858MB (468702240 512 byte sectors: 255H 32S/T 57439C)
> da8 at umass-sim0 bus 0 target 0 lun 0
> da8: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device
> da8: 40.000MB/s transfers
> da8: 7691MB (15751168 512 byte sectors: 255H 63S/T 980C)
> cd0 at ata2 bus 0 target 0 lun 0
> cd0: <HL-DT-ST DVD-ROM GDR-R10N 2.02> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Mounting root from ufs:da8s1a
> DMA space used: 912k, remaining available: 16384k
> Mounting devfs
> Loading configuration files.
> Loading devfs rules: /etc/defaults/devfs.conf.
> Initializing random seed: done.
> Starting file system checks:
> /dev/da8s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/da8s1a: clean, 644567 free (327 frags, 80530 blocks, 0.0%
> fragmentation)
>
> Setting hostname: .
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         options=3<RXCSUM,TXCSUM>
>         inet 127.0.0.1 netmask 0xff000000
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
> Additional routing options:.
> hw.bus.devctl_disable: 0 -> 1
> Generating nsswitch.conf.
> Generating host.conf.
> Mounting NFS file systems:.
> Building databases...
> NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
> ELF ldconfig path: /usr/lib /usr/lib/compat /usr/pkg/lib /usr/local/lib
> [ACPI Debug]  String [0x0B] "_TMP Method"
> Starting local daemons:.
> Updating motd.
> Configuring syscons: blanktime.
> sendmail_submit: /etc/mail/aliases.db not present, generating
> /etc/mail/aliases: 29 aliases, longest 10 bytes, 292 bytes total
> Additional ABI support:.
> Local package initialization:.
> Additional TCP options:.
> Starting pfi...
> Looking for pfi.conf on /dev/acd0...mount_cd9660: /dev/acd0: Invalid
> argument
>  not found
> Looking for pfi.conf on /dev/cd0...mount_cd9660: /dev/cd0: Invalid argument
>  not found
> Looking for pfi.conf on /dev/da0s1...mount_msdos: /dev/da0s1: Invalid
> argument
>  not found
> Looking for pfi.conf on /dev/da8s1...mount_msdos: /dev/da8s1: Invalid
> argument
>  not found
>
> Tue Dec  3 06:21:29 UTC 2013
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> [ACPI Debug]  String [0x0B] "_TMP Method"
> Welcome to DragonFly!
>
> To start the installer, login as 'installer'.  To just get a shell prompt,
> login as 'root'.
>
> DragonFly/i386 (Amnesiac) (console)
>
> login: root
> Last login: Tue Dec  3 06:21:42 2013 on ttyv0
> Copyright (c) 2003-2013 The DragonFly Project.
> Copyright (c) 19[ACPI Debug]  String [0x0B] "_TMP Method"
> 92-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
>
> DragonFly v3.4.3-RELEASE (GENERIC) #0: Wed Aug 28 01:55:49 UTC 2013
>
> Welcome to DragonFly!
>
> # ifconfig bge0 192.168.1.1
> NMI ISA a1, EISA ff
> RAM parity error, likely hardware failure.
>
> Fatal trap 19: non-maskable interrupt trap while in kernel mode
> cpuid = 0; lapic.id = 00000000
> instruction pointer     = 0x8:0xc0254cce
> stack pointer           = 0x10:0xcf000cb8
> frame pointer           = 0x10:0xff800000
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                         = DPL 0, pres 1, def32 1, gran 1
> processor eflags        = interrupt enabled, IOPL = 0
> current process         = Idle
> current thread          = pri 28 (CRIT)
>  <- SMP: XXX
> kernel: type 19 trap, code=0
>
> CPU0 stopping CPUs: 0x0000000e
>  stopped
> Stopped at      bge_link_poll+0x23:     testl   %eax,0x6190(%ecx)
> db> trace
> bge_link_poll(0,182,0,ff8007f4,ce982d88) at bge_link_poll+0x23 0xc0254cce
> intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4
> intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4
> intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4
> ...
> ... (looks infinite)...
>
>
>
>


-- 
Tomorrow Will Never Die
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dragonflybsd.org/pipermail/users/attachments/20131203/bcce9540/attachment-0001.htm>


More information about the Users mailing list