DBSD on Hp mini

[william opensource4you]

All,

This is my feedback with DragonFlyBSD on an HP-mini:
- Atom N455
- AR9285 Wireless Network Adapter
- RTL8101E/RTL8102E PCI Express Fast Ethernet controller
- N10/ICH 7 Family High Definition Audio Controller
- Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller

I've not yet tested the sound and webcam.


short: DBSD rocks except that wifi cpu grows to 100%


details:
----------
With Dbsd-3.0.2 I was not able to have my realtek network driver.
Despite the wifi was well recognized. I was expecting the opposite :-)
By installing the development version ( 21/07/2012), realtek driver
was well recognized (great).

As said in a previous topic, powerd is well working (not cpu heat, ...).

Screen driver (intel) is not recognized by xorg, but we know why
(developed mainly for Linux).
But with the Vesa driver I'm able to install Xfce-4.6 via pkgin.
I've even be able to compile and run without problem Xfce-4.10 :-).

Sata disk and usb storages are working as they should.


I'm thus quite satisfied with DragonFlyBSD.



The touchpad is working, but not the vertical scroll. If I'm right,
this feature is not yet implemented.
Thus touchpad is working as it should.




But I still have one small issue with the wifi :-(.
After 10 or 15 minutes of connection, the dhclient start to use 100%
of the CPU.
This sounds to be linked to the Atheros driver wants with the cable,
I've not such issues at all.

I don't know which type of info could help to solve this issue, so I
post here the dmesg info I receive when I load (kldload
/boot/kernel/if_ath.ko) it in verbose mode (boot option "v"):
ath0.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
ath0: <Atheros 9285> [tentative] mem 0x52000000-0x5200ffff irq 17 at
device 0.0 on pci2
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0x52000000
vm_page_alloc_contig: 00000000011d0000/16384k
boundary check failed
alignment check failed
vm_page_alloc_contig: 00000000011d1000/16384k
vm_page_alloc_contig: 00000000011d2000/16384k
vm_page_alloc_contig: 0000000001200000/16568k
vm_page_alloc_contig: 00000000011d3000/16384k
alignment check failed
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps
150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
ath0: <Atheros 9285> [attached!] mem 0x52000000-0x5200ffff irq 17 at
device 0.0 on pci2


When CPU becomes to to 100%, I can see those messages in dmesg:
ath0: hardware error; resetting
ath0: 0x00000000 0x00000200 0x00000000, 0x00000000 0x00000000 0x00000000
ath0: hardware error; resetting
ath0: 0x00000000 0x00000200 0x00000000, 0x00000000 0x00000000 0x00000000
ath0: hardware error; resetting
ath0: 0x00000000 0x00000200 0x00000000, 0x00000000 0x00000000 0x00000000
ath0: hardware error; resetting
ath0: 0x00000000 0x00000200 0x00000000, 0x00000000 0x00000000 0x00000000


William