DragonFly on Aleutia
Pierre Abbat
phma at bezitopo.org
Fri Dec 7 09:41:52 PST 2012
I succeeded to install DragonFly on Aleutia; the dmesg is attached. Should I
try anything else (like sound or X) or should I post it on dragonflybsd.org as
working? This Aleutia box is going to run Ubuntu once I finish testing
DragonFly on it, but I'm planning to buy more and run DragonFly.
Pierre
--
gau do li'i co'e kei do
-------------- next part --------------
Copyright (c) 2003-2012 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v3.2.1.9.g80b03f-RELEASE #3: Wed Oct 31 20:06:46 PDT 2012
root at pkgbox64.dragonflybsd.org:/usr/obj/build/justin/src/sys/X86_64_GENERIC
TSC clock: 1800039042 Hz, i8254 clock: 1193165 Hz
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.08-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 4277079040 (4078 MB)
avail memory = 3932844032 (3750 MB)
lapic: divisor index 0, frequency 100003983 Hz
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
hpt27xx: RocketRAID 27xx controller driver v1.0 (Oct 31 2012 20:06:37)
ACPI: RSDP 0xf2060 00024 (v2 INTEL )
ACPI: XSDT 0xceffe120 0004C (v1 INTEL D525MW 00000053 01000013)
ACPI: FACP 0xceffd000 000F4 (v3 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: DSDT 0xceff9000 03796 (v1 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: FACS 0xcef87000 00040
ACPI: APIC 0xceff8000 00084 (v2 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: MCFG 0xceff7000 0003C (v1 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: HPET 0xceff6000 00038 (v1 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: SSDT 0xceff2000 0377C (v1 INTEL D525MW 00000053 MSFT 0100000D)
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL D525MW> on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0xe0100000-0xe01fffff,0xd0000000-0xdfffffff,0xe0200000-0xe027ffff irq 16 at device 2.0 on pci0
agp0: <Intel IGD SVGA controller> on vgapci0
agp0: detected 8188k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xe0000000-0xe0003fff,0xe0004000-0xe0004fff irq 16 at device 0.0 on pci1
re0: Hardware rev. 0x2c000000; MAC ver. 0x2f; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: MAC address: 4c:72:b9:7b:8d:bf
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller> port 0x2080-0x209f irq 23 at device 29.0 on pci0
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801G (ICH7) USB controller> port 0x2060-0x207f irq 19 at device 29.1 on pci0
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801G (ICH7) USB controller> port 0x2040-0x205f irq 18 at device 29.2 on pci0
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801G (ICH7) USB controller> port 0x2020-0x203f irq 16 at device 29.3 on pci0
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xe0284400-0xe02847ff irq 23 at device 29.7 on pci0
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
umass0: <UFD 2.0 Silicon-Power4G, class 0/0, rev 2.00/1.00, addr 2> on uhub4
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x20a0-0x20af,0x20c8-0x20cb,0x20b0-0x20b7,0x20cc-0x20cf,0x20b8-0x20bf mem 0xe0284000-0xe02843ff irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
disk scheduler: set policy of ad4 to noop
ad4: 476940MB <WDC WD5000BPVT-00HXZT3 01.01A01> at ata2-master SATA150
ata3: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: Can't get _PSS package - AE_NOT_FOUND
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: Can't get _PSS package - AE_NOT_FOUND
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: Can't get _PSS package - AE_NOT_FOUND
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: Can't get _PSS package - AE_NOT_FOUND
orm0: <Option ROM> at iomem 0xce000-0xcefff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O W83627DHG-P rev 0x73> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
wbsio0: lm0 is already attached at 0x290
ppc1: cannot reserve I/O port range
hpt27xx: no controller detected.
CAM: Configuring 3 busses
CAM: finished configuring all busses
no B_DEVMAGIC (bootdev=0)
Device Mapper version 4.16.0 loaded
dm_target_error: Successfully initialized
dm_target_zero: Successfully initialized
disk scheduler: set policy of da8 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <UFD 2.0 Silicon-Power4G PMAP> Removable Direct Access SCSI-4 device
da8: 40.000MB/s transfers
da8: 3700MB (7579008 512 byte sectors: 255H 63S/T 471C)
Mounting root from ufs:da8s1a
DMA space used: 4132k, remaining available: 16384k
Mounting devfs
HAMMER(ROOT) recovery check seqno=000fbfff
HAMMER(ROOT) recovery range 3000000000000000-3000000000000000
HAMMER(ROOT) recovery nexto 3000000000000000 endseqno=000fc000
HAMMER(ROOT) mounted clean, no recovery needed
HAMMER(ROOT) recovery check seqno=00108898
HAMMER(ROOT) recovery range 30000000016a4aa0-30000000016a4aa0
HAMMER(ROOT) recovery nexto 30000000016a4aa0 endseqno=00108899
HAMMER(ROOT) mounted clean, no recovery needed
HAMMER(ROOT) recovery check seqno=00108956
HAMMER(ROOT) recovery range 30000000016b9060-30000000016b9060
HAMMER(ROOT) recovery nexto 30000000016b9060 endseqno=00108957
HAMMER(ROOT) mounted clean, no recovery needed
boot() called on cpu#0
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
Waiting (max 60 seconds) for system thread syncer0 to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
syncing disks... 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
done
Uptime: 11m23s
The operating system has halted.
Please press any key to reboot.
Rebooting...
Copyright (c) 2003-2012 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v3.2.1.9.g80b03f-RELEASE #3: Wed Oct 31 20:06:46 PDT 2012
root at pkgbox64.dragonflybsd.org:/usr/obj/build/justin/src/sys/X86_64_GENERIC
TSC clock: 1800043344 Hz, i8254 clock: 1193169 Hz
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.08-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 4277079040 (4078 MB)
avail memory = 3933229056 (3751 MB)
lapic: divisor index 0, frequency 100003972 Hz
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
hpt27xx: RocketRAID 27xx controller driver v1.0 (Oct 31 2012 20:06:37)
ACPI: RSDP 0xf2060 00024 (v2 INTEL )
ACPI: XSDT 0xceffe120 0004C (v1 INTEL D525MW 00000053 01000013)
ACPI: FACP 0xceffd000 000F4 (v3 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: DSDT 0xceff9000 03796 (v1 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: FACS 0xcef87000 00040
ACPI: APIC 0xceff8000 00084 (v2 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: MCFG 0xceff7000 0003C (v1 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: HPET 0xceff6000 00038 (v1 INTEL D525MW 00000053 MSFT 0100000D)
ACPI: SSDT 0xceff2000 0377C (v1 INTEL D525MW 00000053 MSFT 0100000D)
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL D525MW> on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0xe0100000-0xe01fffff,0xd0000000-0xdfffffff,0xe0200000-0xe027ffff irq 16 at device 2.0 on pci0
agp0: <Intel IGD SVGA controller> on vgapci0
agp0: detected 8188k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xe0000000-0xe0003fff,0xe0004000-0xe0004fff irq 16 at device 0.0 on pci1
re0: Hardware rev. 0x2c000000; MAC ver. 0x2f; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: MAC address: 4c:72:b9:7b:8d:bf
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller> port 0x2080-0x209f irq 23 at device 29.0 on pci0
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801G (ICH7) USB controller> port 0x2060-0x207f irq 19 at device 29.1 on pci0
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801G (ICH7) USB controller> port 0x2040-0x205f irq 18 at device 29.2 on pci0
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801G (ICH7) USB controller> port 0x2020-0x203f irq 16 at device 29.3 on pci0
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xe0284400-0xe02847ff irq 23 at device 29.7 on pci0
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x20a0-0x20af,0x20c8-0x20cb,0x20b0-0x20b7,0x20cc-0x20cf,0x20b8-0x20bf mem 0xe0284000-0xe02843ff irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
disk scheduler: set policy of ad4 to noop
ad4: 476940MB <WDC WD5000BPVT-00HXZT3 01.01A01> at ata2-master SATA150
ata3: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: Can't get _PSS package - AE_NOT_FOUND
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: Can't get _PSS package - AE_NOT_FOUND
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: Can't get _PSS package - AE_NOT_FOUND
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: Can't get _PSS package - AE_NOT_FOUND
orm0: <Option ROM> at iomem 0xce000-0xcefff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O W83627DHG-P rev 0x73> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
wbsio0: lm0 is already attached at 0x290
ppc1: cannot reserve I/O port range
hpt27xx: no controller detected.
CAM: Configuring 2 busses
CAM: finished configuring all busses
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/WD-WX61EC1LDA23.s1d
HAMMER(ROOT) recovery check seqno=001089f9
HAMMER(ROOT) recovery range 30000000016cacd0-30000000016cacd0
HAMMER(ROOT) recovery nexto 30000000016cacd0 endseqno=001089fa
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 3744k, remaining available: 16384k
Mounting devfs
More information about the Users
mailing list