ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=809594688
Siju George
sgeorge.ml at gmail.com
Sun May 29 22:28:46 PDT 2011
On Sun, May 29, 2011 at 12:54 PM, Francois Tigeot <ftigeot at wolfpond.org> wrote:
>
>>
>> ad8: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=809594688
>> ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR>
>> error=10<NID_NOT_FOUND> LBA=809594688
>
> Your hard-disk may be dying or you may have a problem with the cable/the
> controller.
>
> What sort of disk is this ? If it's an old IDE model, is your ribbon cable
> a 80-wire one ?
> It may be worth it to change it. You may also want to reduce DMA speed as
> a workaround (you should be able to do it from the BIOS).
>
Thanks a lot Francois for the reply :-)
This error appears only some times.
I refitted the cables of all hard disks once again and this error does
not seem to occor for some time.
The Disk is SATA
disk scheduler: set policy of ad8 to noop
ad8: 476940MB <Seagate ST3500418AS CC38> at ata4-master SATA150
disk scheduler: set policy of ad8 to noop
ad8: 476940MB <Seagate ST3500418AS CC38> at ata4-master SATA150
What should I do to find out if the disk is working right?
Is a
# smartctl -t long /dev/ad8
enough?
Also will this type of error affect the Integrity of hammer File System?
Should I do some thing to Check the integrity of the file system ?
My versions are
dfly-bkpsrv# hammer version /Backup3
min=1 wip=none max=6 current=4 description="New undo/flush, faster
flush/sync (DragonFly 2.5+)"
available versions:
I plan to upgrade to hammer v6 soon.
Kernel is DragonFly v2.11.0.247.gda17d9-DEVELOPMENT #36: Mon May 23
12:57:37 IST 2011
Also How do I map ad8 etc to their sernos?
The answer i got from this list earlier was to ls /dev/ and /dev/serno
and match according to the order found there
it was ok before there was ad10. Now ad10 shows up first even before
ad4. so I am a bit confused.
dfly-bkpsrv# cd /dev/
dfly-bkpsrv# ls
acd0 ad4s1g ad8s1 consolectl kmem
psm0 ttyd0 ttyv9 udev
acpi ad4s1h ad8s1d crypto log
ptmx ttyid0 ttyva urandom
ad10 ad6 apm cuaa0 lpt0
pts ttyld0 ttyvb usb
ad10s1 ad6s1 ata cuaia0
lpt0.ctl random ttyv0 ttyvc usb0
ad10s1d ad6s1a bpf cuala0 md0
serno ttyv1 ttyvd usb1
ad4 ad6s1b bpf0 devctl md0s0
sg0 ttyv2 ttyve usb2
ad4s1 ad6s1d bpf1 devfs mem
sga ttyv3 ttyvf xpt0
ad4s1a ad6s1e bpf2 fd null
stderr ttyv4 tun zero
ad4s1b ad6s1f bpf3 io
part-by-uuid stdin ttyv5 tun0
ad4s1d ad6s1g bpsm0 kbd0 pass0
stdout ttyv6 tun1
ad4s1e ad6s1h cd0 kbd1 pci
sysmouse ttyv7 tun2
ad4s1f ad8 console klog ppi0
tty ttyv8 tun3
dfly-bkpsrv# cd /dev/serno/
dfly-bkpsrv# ls
9QMAS4SZ 9QMAS4SZ.s1b 9QMAS4SZ.s1f 9QMATBHX
9QMATBHX.s1b 9QMATBHX.s1f 9VMRFDSY 9VMRG202
9QMAS4SZ.s1 9QMAS4SZ.s1d 9QMAS4SZ.s1g 9QMATBHX.s1
9QMATBHX.s1d 9QMATBHX.s1g 9VMRFDSY.s1 9VMRG202.s1
9QMAS4SZ.s1a 9QMAS4SZ.s1e 9QMAS4SZ.s1h 9QMATBHX.s1a
9QMATBHX.s1e 9QMATBHX.s1h 9VMRFDSY.s1d 9VMRG202.s1d
Thanks
--Siju
More information about the Users
mailing list