Boot hang with GENERIC_SMP kernel on x86-64
Neil Booth
neil at daikokuya.co.uk
Tue Feb 8 06:20:25 PST 2011
GENERIC_SMP hangs during the boot process immediately after the line
CAM: Configuring 4 busses
I've attached the dmesg of a GENERIC UP kernel booting on the same
machine. The GENERIC UP kernel works fine.
Let me know what I can do to help debug this.
Neil.
Copyright (c) 2003-2011 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v2.9.1.650.g4e6c6-DEVELOPMENT #0: Mon Feb 7 21:26:40 JST 2011
neil at athlon2.akihabara.co.uk:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC clock: 2600198679 Hz, i8254 clock: 1193207 Hz
CPU: AMD Athlon(tm) Dual Core Processor 5050e (2600.16-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
real memory = 4025809920 (3839 MB)
avail memory = 3752448000 (3578 MB)
module_register: module pci/ahci already exists!
Module pci/ahci failed to register: 17
FQ scheduler policy version 1.0 loaded
No policy for md0 specified, or policy not found
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd0 at kbdmux0
ACPI: RSDP 0xf9910 00014 (v0 ACPIAM)
ACPI: RSDT 0xcffb0000 00038 (v1 100808 RSDT1710 20081008 MSFT 00000097)
ACPI: FACP 0xcffb0200 00084 (v2 100808 FACP1710 20081008 MSFT 00000097)
ACPI: DSDT 0xcffb0440 04D17 (v1 RS78E RS78E27A 0000027A INTL 20051117)
ACPI: FACS 0xcffbe000 00040
ACPI: APIC 0xcffb0390 0006C (v1 100808 APIC1710 20081008 MSFT 00000097)
ACPI: MCFG 0xcffb0400 0003C (v1 100808 OEMMCFG 20081008 MSFT 00000097)
ACPI: OEMB 0xcffbe040 00071 (v1 100808 OEMB1710 20081008 MSFT 00000097)
ACPI: HPET 0xcffb5160 00038 (v1 100808 OEMHPET 20081008 MSFT 00000097)
cryptosoft0: <software crypto> on motherboard
acpi0: <100808 RSDT1710> on motherboard
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
ACPI HPET table warning: Sequence is non-zero (2)
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xfe900000-0xfe9fffff,0xfeaf0000-0xfeafffff,0xd0000000-0xdfffffff irq 10 at device 5.0 on pci1
pcm0: <ATI (Unknown) High Definition Audio Controller> mem 0xfeae8000-0xfeaebfff irq 10 at device 5.1 on pci1
pcib2: <PCI-PCI bridge> irq 10 at device 10.0 on pci0
pci2: <PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 10 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x05> on mskc0
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> on miibus0
e1000phy0: 1000baseT-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, auto
msk0: MAC address: 00:ea:01:03:cc:bb
atapci0: <ATI ATA controller> port 0x8000-0x800f,0x9000-0x9003,0xa000-0xa007,0xb000-0xb003,0xc000-0xc007 mem 0xfe8ff800-0xfe8ffbff irq 11 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci0
No policy for acd0 specified, or policy not found
disk scheduler: set policy of acd0 to noop
acd0: DVDR <Optiarc DVD RW AD-7203S/1.J1> at ata2-master UDMA33
ata3: <ATA channel 1> on atapci0
No policy for ad6 specified, or policy not found
disk scheduler: set policy of ad6 to noop
ad6: 610480MB <SAMSUNG HD642JI 1AA01111> at ata3-master UDMA33
ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 10 at device 18.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 10 at device 18.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff irq 11 at device 18.2 on pci0
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 10 at device 19.0 on pci0
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 10 at device 19.1 on pci0
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8fa800-0xfe8fa8ff irq 10 at device 19.2 on pci0
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 6 ports with 6 removable, self powered
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
atapci1: <ATI ATA controller> port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pcm1: <ATI SB600 High Definition Audio Controller> mem 0xfe8f4000-0xfe8f7fff irq 10 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <PCI-PCI bridge> at device 20.4 on pci0
pci3: <PCI bus> on pcib3
ohci4: <OHCI (generic) USB controller> mem 0xfe8f9000-0xfe8f9fff irq 10 at device 20.5 on pci0
usb6: OHCI version 1.0, legacy support
usb6: <OHCI (generic) USB controller> on ohci4
usb6: USB revision 1.0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
wbsio0: <Winbond LPC Super I/O W83627DHG rev 0x25> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0xa10
wbsio0: found unused lm0 at 0x290 with state 0, reusing at 0xa10
lm0: <Winbond W83627DHG Hardware Monitor> at port 0xa10-0xa17 on isa0
sio2: can't drain, serial port might not exist, disabling
ppc0: cannot reserve I/O port range
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.99, addr 2> on uhub0
ums0: 3 buttons and Z dir.
ukbd0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> on uhub4
kbd1 at ukbd0
uhid0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> on uhub4
pcm0: <HDA Codec: Unknown Codec>
pcm0: <HDA Driver Revision: 20071129_0050>
pcm1: <HDA Codec: Realtek ALC885>
pcm1: <HDA Driver Revision: 20071129_0050>
CAM: Configuring 4 busses
CAM: finished configuring all busses
No policy for cd0 specified, or policy not found
disk scheduler: set policy of cd0 to noop
no B_DEVMAGIC (bootdev=0)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7203S 1.J1> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from hammer:serno/S1QFJ1EQ500327.s1d
tryroot serno/S1QFJ1EQ500327.s1d
HAMMER(ROOT) recovery check seqno=0097e590
HAMMER(ROOT) recovery range 300000001ae90b80-300000001ae90b80
HAMMER(ROOT) recovery nexto 300000001ae90b80 endseqno=0097e591
HAMMER(ROOT) mounted clean, no recovery needed
Mounting devfs
drm0: <ATI Radeon HD 3200 Graphics> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780/RS880 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
More information about the Users
mailing list