how to get k10temp on squeeze?

[Siju George]

Hi,

 I have a new amd64 Phenome II X6 server which gives this when I run
sensors-detect

===========

Driver `k10temp':
  * Chip `AMD Family 10h thermal sensors' (confidence: 9)

Warning: the required module k10temp is not currently installed
on your system. If it is built into the kernel then it's OK.

============

How do I find out if it is built into the kernel?

the sensors now give me this data

$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.42 V  (min =  +0.80 V, max =  +1.60 V)
+3.3V Voltage:      +3.31 V  (min =  +2.97 V, max =  +3.63 V)
+5V Voltage:        +5.08 V  (min =  +4.50 V, max =  +5.50 V)
+12V Voltage:      +11.86 V  (min = +10.20 V, max = +13.80 V)
CPU Fan Speed:     3341 RPM  (min =  600 RPM)
Chassis Fan Speed: 1080 RPM  (min =  600 RPM)
Chassis2 Fan Speed:   0 RPM  (min =  600 RPM)
Power Fan Speed:      0 RPM  (min =  600 RPM)
CPU Temperature:    +42.0°C  (high = +60.0°C, crit = +95.0°C)
MB Temperature:     +36.0°C  (high = +45.0°C, crit = +75.0°C)

Is it possible to get per CPU Data?

thanks

--Siju