boot0 via serial console

[Thomas Nikolajsen]

>installed 2.4.1 inside a VM and would like to run it headless, therefore
>I did "the usual" to get the boot output on COM1, but this is not quite
>working.
>
>I put -Dh in /boot.config and removed the Booteasy manager. Upon boot I
>see (on vidconsole!)

Try using /boot/boot.config;
boot.config needs to go in the root of your boot file system.
If you are using a separate boot file system (i.e. not same as root file system),
it will make a difference.

 -thomas