SAS RAID controllers support

[Francois Tigeot]

On Thu, Feb 04, 2010 at 06:20:51PM +0100, Francois Tigeot wrote:
> > > > >
> > > > > I'm curious about the state of hardware RAID controllers in DragonFly.
> 
> I'm now pretty sure the only hardware RAID adapters which *could* be usable
> are based on the LSI 1078 chipset
> 
> At least 6 different cards are based on it:
> 
> - LSI MegaRAID SAS 8704ELP / 8708ELP
> - LSI MegaRAID SAS 8704EM2 / 8708EM2
> - LSI MegaRAID SAS 8880EM2
> - LSI MegaRAID SAS 8888ELP
> 
> I should be able to test a MegaRAID SAS 8888ELP soon. It was not recognized last
> year but Matt has since updated the mpt(4) driver.

The MegaRAID SAS 8888ELP is still not recognized.

dmesg :

pci3: <PCI bus> on pcib3
pci3: <mass storage, RAID> (vendor 0x1000, dev 0x0060) at device 0.0 irq 11

pciconf -lv :

none17 at pci0:3:0:0:      class=0x010400 card=0x10061000 chip=0x00601000 rev=0x04 hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS1078 PCI-X Fusion-MPT SAS'
    class      = mass storage
    subclass   = RAID

So it seems DragonFly doesn't support any recent hardware RAID controller.

-- 
Francois Tigeot