Hammer error?
Sdävtaker
sdavtaker at gmail.com
Wed May 20 06:56:07 PDT 2009
Oh, after retry with the new IP it started in
transactionid=000000000002 again, is it ok? shouldnt it start where it
crashed?
Sdav
On Wed, May 20, 2009 at 10:44, Sdävtaker <sdavtaker at gmail.com> wrote:
> I will check with the debugger later, but i can tell in advance that i
> found the trigger, i could reproduce the error :-)
>
> Machine0 has standard out of the box hammerFS from installer, used
> for 2-3 months, now 30GB in /home, it's a server, it has a public
> static IP for his own.
> Machine1 fresh install same structure, running in a VM in my home
> behind a router, behind a ADSL (Dynamic-ip)
> I forwaded the ADSL port 22 to the Machine1, checked my ip address at
> the moment and ran:
>
> Machine0# hammer pfs-status /home //to get shared-uuid
> Machine1# hammer pfs-slave /pfs/machine0.home shared-uuid=******
> Machine0# hammer mirror-copy /home root at Machine1IpAddress:/pfs/machine0.home
> It took a couple of hours (30GB) and sometime in the run the public
> address of my ADSL modem changed (not the internat, im still
> 192.168....)
> Then i got a hammer.core in my root's home.
> I think there is nothing to do about this just do the copy in small
> chunks, right?
> Sdav
>
> On Tue, May 19, 2009 at 22:49, Matthew Dillon
> <dillon at apollo.backplane.com> wrote:
>>
>> :Hello,
>> :I was doing some backup from Machine0 to Machine1 using hammer
>> :mirror-copy and got a suppicious new file called "hammer.core".
>> :Looking around the files it looks like a success copy but i still
>> :curious about this new 720kb file.
>> :Someone can tell me if i need to worry about it and where can i start
>> :checking for errors in case there was one?
>> :Machine0 has DFBSD2.2.0-release, Machine1 has DFBSD2.2.1-release,
>> :could it be the problem? should i just upgrade both?
>> :Sdav
>>
>> A hammer.core could only come from the hammer utility core dumping.
>> This wouldn't be a filesystem error but it certainly indicates a bug
>> somewhere in the hammer utility.
>>
>> If you haven't updated the sources relative to when the core was
>> generated you can recompile the hammer utility with DEBUG_FLAGS=-g and
>> then gdb the binary and core file and get a backtrace to see where it
>> died.
>>
>> If you have updated the sources since then you'd have to wait for a new
>> core file to be generated for a newly debug-compiled hammer utility to
>> match the core file.
>>
>> cd /usr/src/sbin/hammer
>> make clean
>> make obj
>> make DEBUG_FLAGS=-g all install
>>
>> ...
>>
>> gdb /sbin/hammer hammer.core
>> ...
>> gdb> back
>>
>>
>> -Matt
>> Matthew Dillon
>> <dillon at backplane.com>
>>
>
>
>
> --
> Sdävtaker prays to Rikku goddess for a good treasure.
>
--
Sdävtaker prays to Rikku goddess for a good treasure.
More information about the Users
mailing list