USB keyboard
Stefan Johannesdal
stefan.johannesdal at gmail.com
Tue Sep 9 06:05:45 PDT 2008
Hi!
I have encountered a slightly annoying problem. When using my USB
keyboard with a SMP enabled kernel it simply won't work and I have to
plug my old PS2 keyboard back in and reboot to get a working keyboard.
With a UP kernel the USB keyboard works as it should.
Any ideas?
--
Mvh - Stefan -
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.1.0-DEVELOPMENT #3: Mon Sep 8 12:30:25 CEST 2008
root at sledge.lan:/usr/obj/usr/src/sys/SLEDGE-UP
Calibrating clock(s) ... TSC clock: 2420714571 Hz, i8254 clock: 1193310 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2420.47-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
Hyperthreading: 2 logical CPUs
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2147418112 (2097088K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005b2000 - 0x7ffdffff, 2141380608 bytes (522798 pages)
avail memory = 2074398720 (2025780K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb1e0
bios32: Entry = 0xfb330 (c00fb330) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb360
pnpbios: Found PnP BIOS data at 0xc00fb9f0
pnpbios: Entry = f0000:ba20 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel" at 0xc0585000.
wlan: <802.11 Link Layer>
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
ACPI: RSDP @ 0x0xf6c90/0x0014 (v 0 Nvidia)
ACPI: RSDT @ 0x0x7fff3000/0x002C (v 1 Nvidia AWRDACPI 0x42302E31 AWRD 0x01010101)
ACPI: FACP @ 0x0x7fff3040/0x0074 (v 1 Nvidia AWRDACPI 0x42302E31 AWRD 0x01010101)
ACPI: DSDT @ 0x0x7fff30c0/0x4AC4 (v 1 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000C)
ACPI: FACS @ 0x0x7fff0000/0x0040
ACPI: APIC @ 0x0x7fff7bc0/0x007C (v 1 Nvidia AWRDACPI 0x42302E31 AWRD 0x01010101)
pci_open(1): mode 1 addr port (0x0cf8) is 0x80004004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00e110de)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fd550
PCI-Only Interrupts: 5 9 10 11
Location Bus Device Pin Link IRQs
slot 1 0 14 A 0x01 3 4 5 7 9 10 11 12
slot 1 0 14 B 0x02 3 4 5 7 9 10 11 12
slot 1 0 14 C 0x03 3 4 5 7 9 10 11 12
slot 1 0 14 D 0x04 3 4 5 7 9 10 11 12
slot 2 2 6 A 0x03 3 4 5 7 9 10 11 12
slot 2 2 6 B 0x04 3 4 5 7 9 10 11 12
slot 2 2 6 C 0x01 3 4 5 7 9 10 11 12
slot 2 2 6 D 0x02 3 4 5 7 9 10 11 12
slot 3 2 7 A 0x04 3 4 5 7 9 10 11 12
slot 3 2 7 B 0x01 3 4 5 7 9 10 11 12
slot 3 2 7 C 0x02 3 4 5 7 9 10 11 12
slot 3 2 7 D 0x03 3 4 5 7 9 10 11 12
slot 4 2 8 A 0x01 3 4 5 7 9 10 11 12
slot 4 2 8 B 0x02 3 4 5 7 9 10 11 12
slot 4 2 8 C 0x03 3 4 5 7 9 10 11 12
slot 4 2 8 D 0x04 3 4 5 7 9 10 11 12
slot 5 2 9 A 0x02 3 4 5 7 9 10 11 12
slot 5 2 9 B 0x03 3 4 5 7 9 10 11 12
slot 5 2 9 C 0x04 3 4 5 7 9 10 11 12
slot 5 2 9 D 0x01 3 4 5 7 9 10 11 12
slot 6 2 10 A 0x03 3 4 5 7 9 10 11 12
slot 6 2 10 B 0x04 3 4 5 7 9 10 11 12
slot 6 2 10 C 0x01 3 4 5 7 9 10 11 12
slot 6 2 10 D 0x02 3 4 5 7 9 10 11 12
slot 7 2 11 A 0x04 3 4 5 7 9 10 11 12
slot 7 2 11 B 0x01 3 4 5 7 9 10 11 12
slot 7 2 11 C 0x02 3 4 5 7 9 10 11 12
slot 7 2 11 D 0x03 3 4 5 7 9 10 11 12
slot 8 2 12 A 0x01 3 4 5 7 9 10 11 12
slot 8 2 12 B 0x02 3 4 5 7 9 10 11 12
slot 8 2 12 C 0x03 3 4 5 7 9 10 11 12
slot 8 2 12 D 0x04 3 4 5 7 9 10 11 12
slot 9 2 13 A 0x02 3 4 5 7 9 10 11 12
slot 9 2 13 B 0x03 3 4 5 7 9 10 11 12
slot 9 2 13 C 0x04 3 4 5 7 9 10 11 12
slot 9 2 13 D 0x01 3 4 5 7 9 10 11 12
slot 10 2 14 A 0x03 3 4 5 7 9 10 11 12
slot 10 2 14 B 0x04 3 4 5 7 9 10 11 12
slot 10 2 14 C 0x01 3 4 5 7 9 10 11 12
slot 10 2 14 D 0x02 3 4 5 7 9 10 11 12
embedded 0 11 A 0x05 3 4 5 7 9 10 11 12
embedded 0 11 B 0x02 3 4 5 7 9 10 11 12
embedded 0 11 C 0x02 3 4 5 7 9 10 11 12
embedded 0 11 D 0x02 3 4 5 7 9 10 11 12
acpi0.nexus0.root0
acpi0: <Nvidia AWRDACPI> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: switching to generic Cx mode
cpu0: <ACPI CPU> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
fdc0.acpi0.nexus0.root0
fdc0: <NEC 72065B or clone> [tentative] port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0.fdc0.acpi0.nexus0.root0
fd0: <1440-KB 3.5" drive> [tentative] on fdc0 drive 0
fd0: <1440-KB 3.5" drive> [attached!] on fdc0 drive 0
fdc0: <NEC 72065B or clone> [attached!] port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1.acpi0.nexus0.root0
sio1 [tentative] port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1 [attached!] port 0x2f8-0x2ff irq 3 on acpi0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0.acpi0.nexus0.root0
ppc0 [tentative] port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0.ppc0.acpi0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0.ppc0.acpi0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.acpi0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.acpi0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0 [attached!] port 0x378-0x37f irq 7 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <Nvidia AWRDACPI> [attached!] at irq 9 on motherboard
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
map[10]: type 1, range 32, base f0000000, size 27
found-> vendor=0x10de, dev=0x00e1, revid=0xa1
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10de, dev=0x00e0, revid=0xa2
bus=0, slot=1, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 0000e000, size 5
map[20]: type 1, range 32, base 00001c00, size 6
map[24]: type 1, range 32, base 00002000, size 6
found-> vendor=0x10de, dev=0x00e4, revid=0xa1
bus=0, slot=1, func=1
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base fc003000, size 12
found-> vendor=0x10de, dev=0x00e7, revid=0xa1
bus=0, slot=2, func=0
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fc004000, size 12
found-> vendor=0x10de, dev=0x00e7, revid=0xa1
bus=0, slot=2, func=1
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base fc005000, size 8
found-> vendor=0x10de, dev=0x00e8, revid=0xa2
bus=0, slot=2, func=2
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=c, irq=9
map[10]: type 1, range 32, base fc000000, size 12
map[14]: type 1, range 32, base 0000b400, size 3
found-> vendor=0x10de, dev=0x00df, revid=0xa2
bus=0, slot=5, func=0
class=[BRIDGE]06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000b800, size 8
map[14]: type 1, range 32, base 0000bc00, size 7
map[18]: type 1, range 32, base fc001000, size 12
found-> vendor=0x10de, dev=0x00ea, revid=0xa1
bus=0, slot=6, func=0
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x10de, dev=0x00e5, revid=0xa2
bus=0, slot=8, func=0
class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 000009f0, size 3
map[14]: type 1, range 32, base 00000bf0, size 2
map[18]: type 1, range 32, base 00000970, size 3
map[1c]: type 1, range 32, base 00000b70, size 2
map[20]: type 1, range 32, base 0000d800, size 4
map[24]: type 1, range 32, base 0000dc00, size 7
found-> vendor=0x10de, dev=0x00e3, revid=0xa2
bus=0, slot=10, func=0
class=[STORAGE]01-01-85, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
found-> vendor=0x10de, dev=0x00e2, revid=0xa2
bus=0, slot=11, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x10de, dev=0x00ed, revid=0xa2
bus=0, slot=14, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <NVIDIA nForce3-250 AGP Controller> [tentative] mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: allocating GATT for aperture of size 128M
agp0: <NVIDIA nForce3-250 AGP Controller> [attached!] mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=10de device=00e0)> [tentative] at device 1.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=10de device=00e0)> [attached!] at device 1.0 on pci0
pci0: <unknown card> (vendor=0x10de, dev=0x00e4) at 1.1 irq 5
ohci0.pci0.pcib0.legacypci0.nexus0.root0
ohci0: <OHCI (generic) USB controller> [tentative] mem 0xfc003000-0xfc003fff irq 9 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0.ohci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <OHCI (generic) USB controller> [tentative] on ohci0
usb0: USB revision 1.0
uhub0.usb0.ohci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 4 ports with 4 removable, self powered
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <OHCI (generic) USB controller> [attached!] on ohci0
ohci0: <OHCI (generic) USB controller> [attached!] mem 0xfc003000-0xfc003fff irq 9 at device 2.0 on pci0
ohci1.pci0.pcib0.legacypci0.nexus0.root0
ohci1: <OHCI (generic) USB controller> [tentative] mem 0xfc004000-0xfc004fff irq 9 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1.ohci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <OHCI (generic) USB controller> [tentative] on ohci1
usb1: USB revision 1.0
uhub1.usb1.ohci1.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 4 ports with 4 removable, self powered
uhub1: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <OHCI (generic) USB controller> [attached!] on ohci1
ohci1: <OHCI (generic) USB controller> [attached!] mem 0xfc004000-0xfc004fff irq 9 at device 2.1 on pci0
pci0: <USB controller> (vendor=0x10de, dev=0x00e8) at 2.2 irq 9
nfe0.pci0.pcib0.legacypci0.nexus0.root0
nfe0: <NVIDIA nForce3 Gigabit Ethernet> [tentative] port 0xb400-0xb407 mem 0xfc000000-0xfc000fff irq 5 at device 5.0 on pci0
miibus0.nfe0.pci0.pcib0.legacypci0.nexus0.root0
miibus0: <MII bus> [tentative] on nfe0
ukphy0.miibus0.nfe0.pci0.pcib0.legacypci0.nexus0.root0
ukphy0: <Generic IEEE 802.3u media interface> [tentative] on miibus0
ukphy0: OUI 0x00057d, model 0x0004, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on nfe0
nfe0: bpf attached
nfe0: MAC address: 00:0f:ea:3f:70:96
nfe0: <NVIDIA nForce3 Gigabit Ethernet> [attached!] port 0xb400-0xb407 mem 0xfc000000-0xfc000fff irq 5 at device 5.0 on pci0
pci0: <unknown card> (vendor=0x10de, dev=0x00ea) at 6.0 irq 10
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <nVidia nForce3 Pro UDMA133 controller> [tentative] port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ad0: setting PIO4 on nForce3 Pro chip
ad0: setting UDMA66 on nForce3 Pro chip
ad0: nVidia check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
uhub2.uhub1.usb1.ohci1.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <Logitech Logitech G15 Keyboard, class 9/0, rev 1.10/1.03, addr 2> [tentative] on uhub1
ad0: FreeBSD check1 failed
ad0: 19470MB <IBM DJNA-352030 J58OA30K> at ata0-master UDMA66
ad0: 39876480 sectors [39560C/16H/63S] 16 sectors/interrupt 1 depth queue
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
uhub2: 4 ports with 2 removable, bus powered
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on nForce3 Pro chip
acd0: setting UDMA33 on nForce3 Pro chip
uhub2: <Logitech Logitech G15 Keyboard, class 9/0, rev 1.10/1.03, addr 2> [attached!] on uhub1
acd0: <HL-DT-ST DVDRAM GSA-4163B/A103> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <nVidia nForce3 Pro UDMA133 controller> [attached!] port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
atapci1.pci0.pcib0.legacypci0.nexus0.root0
atapci1: <nVidia nForce3 Pro SATA150 controller> [tentative] port 0xdc00-0xdc7f,0xd800-0xd80f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 11 at device 10.0 on pci0
ata2.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci1
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
ugen0.uhub0.usb0.ohci0.pci0.pcib0.legacypci0.nexus0.root0
ugen0: <Logitech Logitech USB Headset, class 0/0, rev 1.10/10.13, addr 2> [tentative] on uhub0
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 239372MB <Maxtor 6L250S0 BANC1G10> at ata2-master SATA150
ad4: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci1
ata3.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci1
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ugen0: <Logitech Logitech USB Headset, class 0/0, rev 1.10/10.13, addr 2> [attached!] on uhub0
ad6: nVidia check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ad6: 239372MB <Maxtor 6L250S0 BANC1G10> at ata3-master SATA150
ad6: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3: <ATA channel 1> [attached!] on atapci1
atapci1: <nVidia nForce3 Pro SATA150 controller> [attached!] port 0xdc00-0xdc7f,0xd800-0xd80f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 11 at device 10.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=10de device=00e2)> [tentative] at device 11.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x8000-0x8fff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base e0000000, size 28
map[14]: type 1, range 32, base 00008000, size 8
map[18]: type 1, range 32, base f9000000, size 16
found-> vendor=0x1002, dev=0x9587, revid=0x00
bus=1, slot=0, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
pci1: <ATI model 9587 graphics accelerator> (vendor=0x1002, dev=0x9587) at 0.0 irq 11
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=10de device=00e2)> [attached!] at device 11.0 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=10de device=00ed)> [tentative] at device 14.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x9000-0xafff
pcib2: memory decode 0xfa000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: pci_attach() physical bus=2
map[10]: type 1, range 32, base fb000000, size 14
map[14]: type 1, range 32, base 00009000, size 8
found-> vendor=0x11ab, dev=0x4320, revid=0x13
bus=2, slot=11, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00009400, size 3
map[14]: type 1, range 32, base 00009800, size 2
map[18]: type 1, range 32, base 00009c00, size 3
map[1c]: type 1, range 32, base 0000a000, size 2
map[20]: type 1, range 32, base 0000a400, size 4
map[24]: type 1, range 32, base fb009000, size 9
found-> vendor=0x1095, dev=0x3512, revid=0x01
bus=2, slot=13, func=0
class=[STORAGE]01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base fb008000, size 11
map[14]: type 1, range 32, base fb004000, size 14
found-> vendor=0x104c, dev=0x8025, revid=0x01
bus=2, slot=14, func=0
class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
skc0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
skc0: <Marvell Yukon 88E8001/8003/8010> [tentative] port 0x9000-0x90ff mem 0xfb000000-0xfb003fff irq 9 at device 11.0 on pci2
pcib2: device skc0 requested decoded memory range 0xfb000000-0xfb003fff
sk0.skc0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
sk0: <Marvell Yukon Lite rev.A3 (0x7)> [tentative] on skc0
miibus1.sk0.skc0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
miibus1: <MII bus> [tentative] on sk0
e1000phy0.miibus1.sk0.skc0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
e1000phy0: <Marvell Semiconductor 88E1011 Gigabit PHY> [tentative] on miibus1
e1000phy0: 1000baseT-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, auto
e1000phy0: <Marvell Semiconductor 88E1011 Gigabit PHY> [attached!] on miibus1
miibus1: <MII bus> [attached!] on sk0
sk0: bpf attached
sk0: MAC address: 00:0f:ea:3f:70:be
sk0: <Marvell Yukon Lite rev.A3 (0x7)> [attached!] on skc0
skc0: <Marvell Yukon 88E8001/8003/8010> [attached!] port 0x9000-0x90ff mem 0xfb000000-0xfb003fff irq 9 at device 11.0 on pci2
atapci2.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
atapci2: <SiI 3512 SATA150 controller> [tentative] port 0xa400-0xa40f,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 mem 0xfb009000-0xfb0091ff irq 10 at device 13.0 on pci2
pcib2: device atapci2 requested decoded I/O range 0xa400-0xa40f
pcib2: device atapci2 requested decoded memory range 0xfb009000-0xfb0091ff
ata4.atapci2.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
ata4: <ATA channel 0> [tentative] on atapci2
ata4: SATA connect status=00000000
ata4: <ATA channel 0> [attached!] on atapci2
ata5.atapci2.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
ata5: <ATA channel 1> [tentative] on atapci2
ata5: SATA connect status=00000000
ata5: <ATA channel 1> [attached!] on atapci2
atapci2: <SiI 3512 SATA150 controller> [attached!] port 0xa400-0xa40f,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 mem 0xfb009000-0xfb0091ff irq 10 at device 13.0 on pci2
fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
fwohci0: <Texas Instruments TSB82AA2> [tentative] mem 0xfb004000-0xfb007fff,0xfb008000-0xfb0087ff irq 5 at device 14.0 on pci2
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xfb008000-0xfb0087ff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0f:ea:56:00:48:ce:82
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S800, max_rec 4096 bytes.
fwohci0: BUS_OPT 0xb003 -> 0xf800b003
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
sbp0.firewire0.fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
fwe0.firewire0.fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 02:0f:ea:48:ce:82
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
7b825000 OUTL ST2 ALL ALL 12 00000000 7b825080 8411:0008 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <Texas Instruments TSB82AA2> [attached!] mem 0xfb004000-0xfb007fff,0xfb008000-0xfb0087ff irq 5 at device 14.0 on pci2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=10de device=00ed)> [attached!] at device 14.0 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
fdc-: fdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
ppc-: ppc0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc1: cannot reserve I/O port range
fdc1 [tentative] failed to probe at port 0x3f0 irq 6 drq 2 on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
psm0: current command byte:0047
bus_explore done
sbp_post_explore
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-0f, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio2 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio3 [tentative] failed to probe at port 0x2f8 irq 3 on isa0
sio4: not probed (disabled)
sio5: not probed (disabled)
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> [tentative] failed to probe at port 0x378-0x37f irq 7 on isa0
isa_probe_children: probing PnP devices
umass0.uhub0.usb0.ohci0.pci0.pcib0.legacypci0.nexus0.root0
umass0: <ASUSTek Reader Pro USB2.0, class 0/0, rev 2.00/1.25, addr 4> [tentative] on uhub0
umass0:7:0:-1: Attached to scbus7
umass0: <ASUSTek Reader Pro USB2.0, class 0/0, rev 2.00/1.25, addr 4> [attached!] on uhub0
uhid0.uhub2.uhub1.usb1.ohci1.pci0.pcib0.legacypci0.nexus0.root0
uhid0: <G15 Keyboard G15 Keyboard, class 0/0, rev 2.00/1.03, addr 4> [tentative] on uhub2
uhid0: <G15 Keyboard G15 Keyboard, class 0/0, rev 2.00/1.03, addr 4> [attached!] on uhub2
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
2:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
ppp0: bpf attached
sl0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
pfsync0: bpf attached
faith0: bpf attached
ukbd0.uhub2.uhub1.usb1.ohci1.pci0.pcib0.legacypci0.nexus0.root0
ukbd0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> [tentative] on uhub2
pflog0: bpf attached
lo0: bpf attached
Linux ELF exec handler installed
kbd0 at ukbd0
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
ukbd0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> [attached!] on uhub2
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
uhid1.uhub2.uhub1.usb1.ohci1.pci0.pcib0.legacypci0.nexus0.root0
uhid1: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> [tentative] on uhub2
uhid1: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> [attached!] on uhub2
ulpt0.uhub0.usb0.ohci0.pci0.pcib0.legacypci0.nexus0.root0
ulpt0: <Hewlett-Packard DeskJet 950C, class 0/0, rev 1.00/1.00, addr 3> [tentative] on uhub0
ulpt0: using bi-directional mode
ulpt0: <Hewlett-Packard DeskJet 950C, class 0/0, rev 1.00/1.00, addr 3> [attached!] on uhub0
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVDRAM GSA-4163B A103> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 0
pass1: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
pass1: 1.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 1
pass2: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
pass2: 1.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 2
pass3: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
pass3: 1.000MB/s transfers
pass4 at umass-sim0 bus 0 target 0 lun 3
pass4: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
pass4: 1.000MB/s transfers
bootdev: a0300000 type=0 unit=0 slice=3 part=0 major=3
ATA PseudoRAID loaded
Mounting root from cd9660:cd0c
Can't allocate root mount for filesystem 'cd9660': 19
Root mount failed: 19
Mounting root from cd9660:acd0c
Can't allocate root mount for filesystem 'cd9660': 19
Root mount failed: 19
Mounting root from cd9660:cd1c
Can't allocate root mount for filesystem 'cd9660': 19
Root mount failed: 19
Mounting root from cd9660:acd1c
Can't allocate root mount for filesystem 'cd9660': 19
Root mount failed: 19
Mounting root from cd9660:acd0
Can't allocate root mount for filesystem 'cd9660': 19
Root mount failed: 19
Mounting root from cd9660:acd1
Can't allocate root mount for filesystem 'cd9660': 19
Root mount failed: 19
Mounting root from ufs:ad0s2a
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4163B A103> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0x7, start 63, end = 22940819, size 22940757
ad0s1: C/H/S end 1023/254/63 (16515008) != end 22940819: invalid
ad0s2: type 0xa5, start 22940820, end = 39872447, size 16931628 : OK
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
start_init: trying /sbin/init
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic STORAGE DEVICE 0125> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
psmintr: unknown PS2++ packet type 5: 0xd8 0x1e 0x0f
psmintr: unknown PS2++ packet type 6: 0xd8 0x22 0x20
psmintr: unknown PS2++ packet type 5: 0xd8 0x1e 0x0f
psmintr: unknown PS2++ packet type 5: 0xd8 0x1e 0x0f
More information about the Users
mailing list