DragonFly cannot detect existing FreeBSD partitions during install and cannot detect SanDisk USB flash drive during install
Archimedes Gaviola
archimedes.gaviola at gmail.com
Wed Jul 30 04:56:09 PDT 2008
On Mon, Jul 28, 2008 at 9:26 AM, Matthew Dillon
<dillon at apollo.backplane.com> wrote:
> :...
> :> "cd" "md" "ad" "acd" "mfs"
> :>
> :> Here, I typed "?" where it doesn't show any "da" device
> :>
> :>
> :Could it be that you have to load the module at boot from loader.conf?
> :I know I had to fiddle with this when I set up my system to boot from a
> :vinum mirror volume. Look in /boot/defaults/loader.conf for options and
> :make your own adapted loader.conf in /boot.
> :
> :--
> :
> : Mvh - Stefan -
>
> Yah, it should work if specified in loader.conf. Alternatively
> one can compile up a custom kernel that builds it in.
>
> -Matt
> Matthew Dillon
> <dillon at backplane.com>
>
Hi Matt and Stefan,
By the way, is there any difference when you install DragonFly on a
notebook PC and a desktop PC? Because when I try to boot my USB
SanDisk on an AMD-64 Athlon machine, it just detects the mount
partition of the USB and successfully boots without any problem. Below
is the dmesg and df messages output.
# dmesg
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
root at test12.backplane.com:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2000007290 Hz, i8254 clock: 1193143 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) 64 Processor 3200+ (2000.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1006305280 (982720K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x007d2000 - 0x3bf9ffff, 998039552 bytes (243662 pages)
avail memory = 963477504 (940896K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x31
pnpbios: Found PnP BIOS data at 0xc00f7cf0
pnpbios: Entry = f0000:8b8a Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc07a5000.
Preloaded elf module "/modules/ehci.ko" at 0xc07a5260.
Preloaded elf module "/modules/acpi.ko" at 0xc07a5308.
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008f64
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02041106)
pcibios: BIOS version 3.00
Using $PIR table, 11 entries at 0xc00f7bb0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 1 0 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 15 A 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 C 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 D 0x02 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 D 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 A 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 B 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 C 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 1 0 11 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 1 0 11 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 1 0 11 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 1 0 11 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 0 12 A 0x02 3 4 5 6 7 10 11 12 14 15
slot 2 0 12 B 0x03 3 4 5 6 7 10 11 12 14 15
slot 2 0 12 C 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 0 12 D 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 10 11 12 14 15
embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 18 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 18 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 18 D 0x05 3 4 5 6 7 10 11 12 14 15
ACPI: RSDP @ 0x0xfaa70/0x0014 (v 0 ACPIAM)
ACPI: RSDT @ 0x0x3bfb0000/0x0030 (v 1 A M I OEMRSDT 0x09000526 MSFT
0x00000097)
ACPI: FACP @ 0x0x3bfb0200/0x0084 (v 2 A M I OEMFACP 0x09000526 MSFT
0x00000097)
ACPI: DSDT @ 0x0x3bfb03f0/0x46AB (v 1 A0399 A0399001 0x00000001 INTL
0x02002026)
ACPI: FACS @ 0x0x3bfbe000/0x0040
ACPI: APIC @ 0x0x3bfb0390/0x005C (v 1 A M I OEMAPIC 0x09000526 MSFT
0x00000097)
ACPI: OEMB @ 0x0x3bfbe040/0x0046 (v 1 A M I AMI_OEM 0x09000526 MSFT
0x00000097)
sched_ithd: stray interrupt 7 on cpu 0
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <A M I OEMRSDT> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
AcpiOsDerivePciId: bus 0 dev 15 func 1
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: <ACPI CPU> [attached!] port 0x5010-0x5013 on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Sleep Button> [tentative] on acpi0
acpi_button0: <Sleep Button> [attached!] on acpi0
acpi_button1.acpi0.nexus0.root0
acpi_button1: <Power Button> [tentative] on acpi0
acpi_button1: <Power Button> [attached!] on acpi0
fdc0.acpi0.nexus0.root0
fdc0: <NEC 72065B or clone> [tentative] port 0x3f7,0x3f0-0x3f5 irq 6
drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0.fdc0.acpi0.nexus0.root0
fd0: <1440-KB 3.5" drive> [tentative] on fdc0 drive 0
fd0: <1440-KB 3.5" drive> [attached!] on fdc0 drive 0
fdc0: <NEC 72065B or clone> [attached!] port 0x3f7,0x3f0-0x3f5 irq 6
drq 2 on acpi0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0.acpi0.nexus0.root0
ppc0 [tentative] port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0.ppc0.acpi0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0.ppc0.acpi0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.acpi0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.acpi0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0 [attached!] port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0045
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0 0 0 0
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
acpi0: <A M I OEMRSDT> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
map[10]: type 1, range 32, base dc000000, size 26
found-> vendor=0x1106, dev=0x0204, revid=0x00
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x1204, revid=0x00
bus=0, slot=0, func=1
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x2204, revid=0x00
bus=0, slot=0, func=2
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x3204, revid=0x00
bus=0, slot=0, func=3
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x4204, revid=0x00
bus=0, slot=0, func=4
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x7204, revid=0x00
bus=0, slot=0, func=7
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0xb188, revid=0x00
bus=0, slot=1, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
map[10]: type 1, range 32, base 0000ec00, size 3
map[14]: type 1, range 32, base 0000e880, size 2
map[18]: type 1, range 32, base 0000e800, size 3
map[1c]: type 1, range 32, base 0000e480, size 2
map[20]: type 1, range 32, base 0000e400, size 4
map[24]: type 1, range 32, base febffc00, size 10
found-> vendor=0x1106, dev=0x3349, revid=0x00
bus=0, slot=15, func=0
class=[STORAGE]01-01-8f, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[20]: type 1, range 32, base 0000fc00, size 4
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000e080, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=0
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 0000e000, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=1
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=c, irq=5
map[20]: type 1, range 32, base 0000dc00, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=2
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[20]: type 1, range 32, base 0000d880, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=3
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=d, irq=3
map[10]: type 1, range 32, base febff400, size 8
found-> vendor=0x1106, dev=0x3104, revid=0x90
bus=0, slot=16, func=4
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=c, irq=5
found-> vendor=0x1106, dev=0x3287, revid=0x00
bus=0, slot=17, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 0000d400, size 8
found-> vendor=0x1106, dev=0x3059, revid=0x70
bus=0, slot=17, func=5
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=5
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 0000d000, size 8
map[14]: type 1, range 32, base febff000, size 8
found-> vendor=0x1106, dev=0x3065, revid=0x7c
bus=0, slot=18, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
found-> vendor=0x1106, dev=0x287b, revid=0x00
bus=0, slot=19, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=4 secondarybus=2
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <VIA 8380 host to PCI bridge> [tentative] mem
0xdc000000-0xdfffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: allocating GATT for aperture of size 64M
agp0: <VIA 8380 host to PCI bridge> [attached!] mem
0xdc000000-0xdfffffff at device 0.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> [tentative] at
device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfca00000-0xfeafffff
pcib1: prefetched decode 0xcff00000-0xd7efffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base d0000000, size 26
map[14]: type 1, range 32, base fd000000, size 24
found-> vendor=0x1106, dev=0x3108, revid=0x01
bus=1, slot=0, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
pci1: <VGA-compatible display device> (vendor=0x1106, dev=0x3108) at 0.0 irq 11
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> [attached!] at
device 1.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <VIA 8251 SATA300 controller> [tentative] port
0xe400-0xe40f,0xe480-0xe483,0xe800-0xe807,0xe880-0xe883,0xec00-0xec07
mem 0xfebffc00-0xfebfffff irq 10 at device 15.0 on pci0
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 4 ports detected
ata2.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci0
ata2: SATA connect time=0ms
ata2: No signature, assuming disk device
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: VIA check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 78167MB <Maxtor 6V080E0 VA111630> at ata2-master SATA150
ad4: 160086528 sectors [158816C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci0
ata3.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: <ATA channel 1> [attached!] on atapci0
ata4.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: <ATA channel 2> [attached!] on atapci0
ata5.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata5: <ATA channel 3> [tentative] on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: <ATA channel 3> [attached!] on atapci0
atapci0: <VIA 8251 SATA300 controller> [attached!] port
0xe400-0xe40f,0xe480-0xe483,0xe800-0xe807,0xe880-0xe883,0xec00-0xec07
mem 0xfebffc00-0xfebfffff irq 10 at device 15.0 on pci0
atapci1.pci0.pcib0.legacypci0.nexus0.root0
atapci1: <VIA 8251 UDMA133 controller> [tentative] port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on
pci0
ata0.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci1
atapci1: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=50
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=ff stat1=10 devices=0x8<ATAPI_SLAVE>
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8251 chip
acd0: setting UDMA33 on 8251 chip
acd0: <ASUS CD-S520/A5/1.22> CDROM drive at ata0 as slave
acd0: 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0: <ATA channel 0> [attached!] on atapci1
ata1.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci1
atapci1: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: <ATA channel 1> [attached!] on atapci1
atapci1: <VIA 8251 UDMA133 controller> [attached!] port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on
pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <VIA 83C572 USB controller> [tentative] port 0xe080-0xe09f irq
11 at device 16.0 on pci0
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <VIA 83C572 USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <VIA 83C572 USB controller> [attached!] on uhci0
uhci0: <VIA 83C572 USB controller> [attached!] port 0xe080-0xe09f irq
11 at device 16.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <VIA 83C572 USB controller> [tentative] port 0xe000-0xe01f irq
5 at device 16.1 on pci0
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <VIA 83C572 USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <VIA 83C572 USB controller> [attached!] on uhci1
uhci1: <VIA 83C572 USB controller> [attached!] port 0xe000-0xe01f irq
5 at device 16.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <VIA 83C572 USB controller> [tentative] port 0xdc00-0xdc1f irq
10 at device 16.2 on pci0
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <VIA 83C572 USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <VIA 83C572 USB controller> [attached!] on uhci2
uhci2: <VIA 83C572 USB controller> [attached!] port 0xdc00-0xdc1f irq
10 at device 16.2 on pci0
uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhci3: <VIA 83C572 USB controller> [tentative] port 0xd880-0xd89f irq
3 at device 16.3 on pci0
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
usb3: <VIA 83C572 USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <VIA 83C572 USB controller> [attached!] on uhci3
uhci3: <VIA 83C572 USB controller> [attached!] port 0xd880-0xd89f irq
3 at device 16.3 on pci0
ehci0.pci0.pcib0.legacypci0.nexus0.root0
ehci0: <VIA VT6202 USB 2.0 controller> [tentative] mem
0xfebff400-0xfebff4ff irq 5 at device 16.4 on pci0
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: (null) (null) (null) (null)
intr 5 at 40001/40000 hz, livelocked limit engaged!
usb4.ehci0.pci0.pcib0.legacypci0.nexus0.root0
usb4: <VIA VT6202 USB 2.0 controller> [tentative] on ehci0
usb4: USB revision 2.0
uhub4.usb4.ehci0.pci0.pcib0.legacypci0.nexus0.root0
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb4
uhub4: 8 ports with 8 removable, self powered
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb4
umass0.uhub4.usb4.ehci0.pci0.pcib0.legacypci0.nexus0.root0
umass0: <SanDisk Corporation U3 Cruzer Micro, class 0/0, rev
2.00/0.10, addr 2> [tentative] on uhub4
umass0:6:0:-1: Attached to scbus6
umass0: <SanDisk Corporation U3 Cruzer Micro, class 0/0, rev
2.00/0.10, addr 2> [attached!] on uhub4
usb4: <VIA VT6202 USB 2.0 controller> [attached!] on ehci0
ehci0: <VIA VT6202 USB 2.0 controller> [attached!] mem
0xfebff400-0xfebff4ff irq 5 at device 16.4 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=1106 device=3287)> [tentative] at
device 17.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=1106 device=3287)> [attached!] at
device 17.0 on pci0
pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 5
vr0.pci0.pcib0.legacypci0.nexus0.root0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> [tentative] port 0xd000-0xd0ff
mem 0xfebff000-0xfebff0ff irq 11 at device 18.0 on pci0
miibus0.vr0.pci0.pcib0.legacypci0.nexus0.root0
miibus0: <MII bus> [tentative] on vr0
rlphy0.miibus0.vr0.pci0.pcib0.legacypci0.nexus0.root0
rlphy0: <RTL8201L 10/100 media interface> [tentative] on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rlphy0: <RTL8201L 10/100 media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on vr0
intr 5 at 40001/20000 hz, in livelock
(probe0:ata4:0:1:0): error 22
(probe0:ata4:0:1:0): Unretryable Error
intr 5 at 1/20000 hz, livelock removed
vr0: bpf attached
vr0: MAC address: 00:15:f2:3d:ac:9a
vr0: <VIA VT6102 Rhine II 10/100BaseTX> [attached!] port 0xd000-0xd0ff
mem 0xfebff000-0xfebff0ff irq 11 at device 18.0 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=1106 device=287b)> [tentative] at
device 19.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0x0-0x0
pcib2: prefetched decode 0x0-0x0
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: pci_attach() physical bus=2
found-> vendor=0x1106, dev=0x287c, revid=0x00
bus=2, slot=0, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=3 secondarybus=3
PCI Express ver.1 cap=0x0041
found-> vendor=0x1106, dev=0x287d, revid=0x00
bus=2, slot=0, func=1
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=4 secondarybus=4
PCI Express ver.1 cap=0x0041
pcib3.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=1106 device=287c)> [tentative] at
device 0.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0x0-0x0
pcib3: prefetched decode 0x0-0x0
pci3.pcib3.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib3
pci3: pci_attach() physical bus=3
pci3: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=1106 device=287c)> [attached!] at
device 0.0 on pci2
pcib4.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib4: <PCI to PCI bridge (vendor=1106 device=287d)> [tentative] at
device 0.1 on pci2
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0x0-0x0
pcib4: prefetched decode 0x0-0x0
pci4.pcib4.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib4
pci4: pci_attach() physical bus=4
pci4: <PCI bus> [attached!] on pcib4
pcib4: <PCI to PCI bridge (vendor=1106 device=287d)> [attached!] at
device 0.1 on pci2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=1106 device=287b)> [attached!] at
device 19.0 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ex_isa_identify()
ahc_isa_probe 13: ioport 0xdc00 alloc failed
fdc-: fdc0 exists, using next available unit number
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
ppc-: ppc0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc1: cannot reserve I/O port range
fdc1 [tentative] failed to probe at port 0x3f0 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at
port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 6e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 6e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 6e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290 on isa0
it0 [tentative] failed to probe at port 0x290 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> [tentative] failed to probe at port 0x378-0x37f
irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03cc3f20 0..972=973 cylinders, 0..63=64 heads, 1..32=32 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
faith0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
(probe0:ata4:0:1:0): error 6
(probe0:ata4:0:1:0): Unretryable Error
(probe0:ata4:0:1:0): error 22
(probe0:ata4:0:1:0): Unretryable Error
pass0 at ata4 bus 0 target 1 lun 0
pass0: <ASUS CD-S520/A5 1.22> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 0
pass1: <SanDisk U3 Cruzer Micro 3.21> Removable Direct Access SCSI-2 device
pass1: 40.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 1
pass2: <SanDisk U3 Cruzer Micro 3.21> Removable CD-ROM SCSI-2 device
pass2: 40.000MB/s transfers
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
ATA PseudoRAID loaded
Mounting root from ufs:/dev/da0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk U3 Cruzer Micro 3.21> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 973MB (1994385 512 byte sectors: 64H 32S/T 973C)
(cd0:ata4:0:1:0): error 6
(cd0:ata4:0:1:0): Unretryable Error
cd0 at ata4 bus 0 target 1 lun 0
cd0: <ASUS CD-S520/A5 1.22> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at umass-sim0 bus 0 target 0 lun 1
cd1: <SanDisk U3 Cruzer Micro 3.21> Removable CD-ROM SCSI-2 device
cd1: 40.000MB/s transfers
cd1: cd present [3072 x 2048 byte records]
da0s1: type 0xa5, start 32, end = 1992703, size 1992672 : OK
start_init: trying /sbin/init
# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da0s1a 201518 106526 78872 57% /
/dev/da0s1d 64462 580 58726 1% /var
/dev/da0s1e 64462 14 59292 0% /tmp
/dev/da0s1f 302350 198368 79794 71% /usr
/dev/da0s1g 246878 2 227126 0% /home
procfs 4 4 0 100% /proc
Thanks,
Archimedes
More information about the Users
mailing list