DragonFly crash over Vaio NR21Z

[Matthew Dillon]

   I don't think there's anything we can do, the machine took a NMI fault
   in the middle of a normal instruction.  There might be some BIOS settings
   you can play with but it looks like a real ram fault to me.  I searched
   around google for a bit but didn't see anything specific.

					-Matt
					Matthew Dillon 
					<dillon at backplane.com>


:I 'd like to install DragonFly 1.12.1 on my Sony Vaio NR21Z, but
:whilst DragonFly load, it appears:
:
:RAM parity error, likely hardware failure
:
:Fatal trap 19: non-maskable interrupt trap while in kernel mode
:instruction pointer  = 0x8:0xc04a7750
:stack pointer         = 0x10:0xc07789e4
:frame pointer         = 0x10:0xc07789ec
:code segment       = base 0x0, limit 0xfffff, type 0x1b
:                            = DPL 0, pres 1, def32 1, gran 1
:processor eflags    = interrupt enabled, IOPL = 0
:current process     = 0 (swapper)
:current thread        = pri 12
:
:kernel: type 19 trap, code=0
:Stopped at        DODELAY+0x1:       movl   %esp,ebp
:db>
:
:What is the problem, DragonFly don't support my notebook
:
:-- 
:only the paranoid will survive
: