bge not probed

Tue Feb 20 21:21:13 PST 2007

Hi,

I tried to netboot a dragonfly 1.8 kernel but it didn't probe bge, so it
was unable to mount the nfs root.

FreeBSD sees it as:

bge0: <Broadcom BCM5704 A3, ASIC rev. 0x2003> mem 0xf3350000-0xf335ffff,0xf3340000-0xf334ffff irq 31 at device 3.0 on pci14
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:00:1a:1a:27:f9
bge1: <Broadcom BCM5704 A3, ASIC rev. 0x2003> mem 0xf3370000-0xf337ffff,0xf3360000-0xf336ffff irq 28 at device 3.1 on pci14
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:00:1a:1a:27:f8

bge0 at pci14:3:0: class=0x020000 card=0x2b801022 chip=0x164814e4 rev=0x03 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5704 NetXtreme Dual Gigabit Adapter'
    class      = network
    subclass   = ethernet
bge1 at pci14:3:1: class=0x020000 card=0x2b801022 chip=0x164814e4 rev=0x03 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5704 NetXtreme Dual Gigabit Adapter'
    class      = network
    subclass   = ethernet

Here is the boot -v from the serial console:

SMAP type=01 base=00000000 00000000 len=00000000 0008a400
SMAP type=02 base=00000000 0008a400 len=00000000 00015c00
SMAP type=02 base=00000000 000d0000 len=00000000 00030000
SMAP type=01 base=00000000 00100000 len=00000000 bfe10000
SMAP type=03 base=00000000 bff10000 len=00000000 00013000
SMAP type=04 base=00000000 bff23000 len=00000000 0005d000
SMAP type=02 base=00000000 bff80000 len=00000000 00080000
SMAP type=02 base=00000000 fec00000 len=00000000 00010000
SMAP type=02 base=00000000 fff80000 len=00000000 00080000
Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[8CThe Regents of the University of California. All rights reserved.
DragonFly 1.8.0-RELEASE #0: Mon Jan 29 18:17:49 PST 2007
    root@:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2190613257 Hz, i8254 clock: 1193173 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Engineering Sample  (2190.67-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f10  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1<SSE3>
  Hyperthreading: 2 logical CPUs
  AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 3220242432 (3144768K bytes)
Physical memory chunk(s):
0x00001000 - 0x00089fff, 561152 bytes (137 pages)
0x007a2000 - 0xbfefffff, 3212173312 bytes (784222 pages)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
avail memory = 3122618368 (3049432K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f77c0
bios32: Entry = 0xfd460 (c00fd460)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x214
pnpbios: Found PnP BIOS data at 0xc00f7860
pnpbios: Entry = f0000:bcea  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel.BOOTP" at 0xc0775000.
Preloaded elf module "/modules/acpi.ko" at 0xc077524c.
sched_ithd: stray interrupt 7
Leaving critical section, allowing interrupts
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1):[4Cmode 1 addr port (0x0cf8) is 0x80010110
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 1 2 3 4 5 6 [class=060400] [hdr=01] is there (id=74601022)
pcibios: BIOS version 2.10
Using $PIR table, 20 entries at 0xc00fde80
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    1    0    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    D   0x04  3 4 5 6 7 9 10 11 12 14 15
embedded    1    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    1    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    1    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    1    1    D   0x04  3 4 5 6 7 9 10 11 12 14 15
slot 6      1    4    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 6      1    4    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 6      1    4    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 6      1    4    D   0x04  3 4 5 6 7 9 10 11 12 14 15
embedded   14    1    A   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded   14    1    B   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded   14    1    C   0x04  3 4 5 6 7 9 10 11 12 14 15
embedded   14    1    D   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded   14    3    A   0x04  3 4 5 6 7 9 10 11 12 14 15
embedded   14    3    B   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded   14    3    C   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded   14    3    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 3      9    1    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 3      9    1    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 3      9    1    C   0x04  3 4 5 6 7 9 10 11 12 14 15
slot 3      9    1    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 4      9    2    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 4      9    2    B   0x04  3 4 5 6 7 9 10 11 12 14 15
slot 4      9    2    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 4      9    2    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 5      9    3    A   0x04  3 4 5 6 7 9 10 11 12 14 15
slot 5      9    3    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 5      9    3    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 5      9    3    D   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    8    3    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1     19    1    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1     19    1    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1     19    1    C   0x04  3 4 5 6 7 9 10 11 12 14 15
slot 1     19    1    D   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    8    4    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 2     27    1    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 2     27    1    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2     27    1    C   0x04  3 4 5 6 7 9 10 11 12 14 15
slot 2     27    1    D   0x01  3 4 5 6 7 9 10 11 12 14 15
ACPI: RSDP @ 0x0xf7810/0x0024 (v  2 PTLTD )
ACPI: XSDT @ 0x0xbff1eda8/0x006C (v  1 PTLTD     XSDT   0x06040000  LTP 0x00000000)
ACPI: FACP @ 0x0xbff1ee14/0x0074 (v  1 AMD    HAMMER   0x06040000 PTEC 0x000F4240)
ACPI: DSDT @ 0x0xbff1ee88/0x3678 (v  1 AMD-K8  AMDACPI 0x06040000 MSFT 0x0100000E)
ACPI: FACS @ 0x0xbff23fc0/0x0040
ACPI: SSDT @ 0x0xbff22500/0x06BC (v  1 PTLTD  POWERNOW 0x06040000  LTP 0x00000001)
ACPI: SRAT @ 0x0xbff22bbc/0x0178 (v  1 AMD    HAMMER   0x06040000 AMD  0x00000001)
ACPI: SSDT @ 0x0xbff22d34/0x009D (v  1 AMD-K8 AMD-ACPI 0x06040000  AMD 0x00000001)
ACPI: SSDT @ 0x0xbff22dd1/0x009D (v  1 AMD-K8 AMD-ACPI 0x06040000  AMD 0x00000001)
ACPI: HPET @ 0x0xbff22e6e/0x0038 (v  1 AMD    HAMMER   0x06040000 PTEC 0x00000000)
ACPI: SPCR @ 0x0xbff22ea6/0x0050 (v  1 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001)
ACPI: APIC @ 0x0xbff22ef6/0x00E2 (v  1 PTLTD     APIC   0x06040000  LTP 0x00000000)
ACPI: BOOT @ 0x0xbff22fd8/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
sched_ithd: stray interrupt 7
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <PTLTD    XSDT> [tentative] on motherboard
AcpiOsDerivePciId: bus 8 dev 3 func 0
AcpiOsDerivePciId: bus 8 dev 3 func 0
AcpiOsDerivePciId: bus 8 dev 4 func 0
AcpiOsDerivePciId: bus 8 dev 4 func 0
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
can't fetch resources for \_PR_.CPU0 - AE_TYPE
can't fetch resources for \_PR_.CPU1 - AE_TYPE
can't fetch resources for \_PR_.CPU2 - AE_TYPE
can't fetch resources for \_PR_.CPU3 - AE_TYPE
can't fetch resources for \_PR_.CPU4 - AE_TYPE
can't fetch resources for \_PR_.CPU5 - AE_TYPE
can't fetch resources for \_PR_.CPU6 - AE_TYPE
can't fetch resources for \_PR_.CPU7 - AE_TYPE
AcpiOsDerivePciId: bus 0 dev 7 func 3
unknown: I/O range not supported
unknown: I/O range not supported
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0xc008-0xc00b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0xc008-0xc00b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: <ACPI CPU> [attached!] on acpi0
isab0.acpi0.nexus0.root0
isab0: <ACPI Generic ISA bridge> [tentative] on acpi0
isab0: <ACPI Generic ISA bridge> [attached!] on acpi0
acpi0: <PTLTD    XSDT> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found-> vendor=0x1022, dev=0x7460, revid=0x07
[8Cbus=0, slot=6, func=0
[8Cclass=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
[8Csubordinatebus=1 [7Csecondarybus=1
found-> vendor=0x1022, dev=0x7468, revid=0x05
[8Cbus=0, slot=7, func=0
[8Cclass=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
[8Cmap[20]: type 1, range 32, base 00001020, size  4
found-> vendor=0x1022, dev=0x7469, revid=0x03
[8Cbus=0, slot=7, func=1
[8Cclass=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x746b, revid=0x05
[8Cbus=0, slot=7, func=3
[8Cclass=[BRIDGE]06-80-00, hdrtype=0x00, mfdev=0
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1100, revid=0x00
[8Cbus=0, slot=24, func=0
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1101, revid=0x00
[8Cbus=0, slot=24, func=1
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1102, revid=0x00
[8Cbus=0, slot=24, func=2
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1103, revid=0x00
[8Cbus=0, slot=24, func=3
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1100, revid=0x00
[8Cbus=0, slot=25, func=0
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1101, revid=0x00
[8Cbus=0, slot=25, func=1
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1102, revid=0x00
[8Cbus=0, slot=25, func=2
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1103, revid=0x00
[8Cbus=0, slot=25, func=3
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1100, revid=0x00
[8Cbus=0, slot=26, func=0
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1101, revid=0x00
[8Cbus=0, slot=26, func=1
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1102, revid=0x00
[8Cbus=0, slot=26, func=2
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1103, revid=0x00
[8Cbus=0, slot=26, func=3
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1100, revid=0x00
[8Cbus=0, slot=27, func=0
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1101, revid=0x00
[8Cbus=0, slot=27, func=1
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1102, revid=0x00
[8Cbus=0, slot=27, func=2
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
found-> vendor=0x1022, dev=0x1103, revid=0x00
[8Cbus=0, slot=27, func=3
[8Cclass=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=1022 device=7460)> [tentative] at device 6.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xf0000000-0xf1ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
[8Cmap[10]: type 1, range 32, base f0000000, size 12
found-> vendor=0x1022, dev=0x7464, revid=0x0b
[8Cbus=1, slot=0, func=0
[8Cclass=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
[8Csubordinatebus=0 [7Csecondarybus=0
[8Cintpin=d, irq=11
[8Cmap[10]: type 1, range 32, base f0001000, size 12
found-> vendor=0x1022, dev=0x7464, revid=0x0b
[8Cbus=1, slot=0, func=1
[8Cclass=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=0
[8Csubordinatebus=0 [7Csecondarybus=0
[8Cintpin=d, irq=11
[8Cmap[10]: type 1, range 32, base f0002000, size 12
found-> vendor=0x1022, dev=0x7462, revid=0x03
[8Cbus=1, slot=1, func=0
[8Cclass=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
[8Csubordinatebus=0 [7Csecondarybus=0
[8Cintpin=a, irq=10
[8Cmap[10]: type 1, range 32, base f1000000, size 24
[8Cmap[14]: type 1, range 32, base 00002000, size  8
[8Cmap[18]: type 1, range 32, base f0003000, size 12
found-> vendor=0x1002, dev=0x4752, revid=0x27
[8Cbus=1, slot=4, func=0
[8Cclass=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
[8Csubordinatebus=0 [7Csecondarybus=0
[8Cintpin=a, irq=10
ohci0.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
ohci0: <OHCI (generic) USB controller> [tentative] mem 0xf0000000-0xf0000fff irq 11 at device 0.0 on pci1
pcib1: device ohci0 requested decoded memory range 0xf0000000-0xf0000fff
usb0: OHCI version 1.0, legacy support
usb0.ohci0.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
usb0: <OHCI (generic) USB controller> [tentative] on ohci0
usb0: USB revision 1.0
uhub0: 3 ports with 3 removable, self powered
usb0: <OHCI (generic) USB controller> [attached!] on ohci0
ohci0: <OHCI (generic) USB controller> [attached!] mem 0xf0000000-0xf0000fff irq 11 at device 0.0 on pci1
ohci1.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
ohci1: <OHCI (generic) USB controller> [tentative] mem 0xf0001000-0xf0001fff irq 11 at device 0.1 on pci1
pcib1: device ohci1 requested decoded memory range 0xf0001000-0xf0001fff
usb1: OHCI version 1.0, legacy support
usb1.ohci1.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <OHCI (generic) USB controller> [tentative] on ohci1
usb1: USB revision 1.0
uhub1: 3 ports with 3 removable, self powered
usb1: <OHCI (generic) USB controller> [attached!] on ohci1
ohci1: <OHCI (generic) USB controller> [attached!] mem 0xf0001000-0xf0001fff irq 11 at device 0.1 on pci1
pci1: <unknown card> (vendor=0x1022, dev=0x7462) at 1.0 irq 10
pci1: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 4.0 irq 10
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=1022 device=7460)> [attached!] at device 6.0 on pci0
isab1.pci0.pcib0.legacypci0.nexus0.root0
isab1: <PCI to ISA bridge (vendor=1022 device=7468)> [tentative] at device 7.0 on pci0
isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab1
isa0: <ISA bus> [attached!] on isab1
isab1: <PCI to ISA bridge (vendor=1022 device=7468)> [attached!] at device 7.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <AMD 8111 UltraATA/133 controller> [tentative] port 0x1020-0x102f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1020
ata0: mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=00 stat1=01
ata0: devices=0c
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1028
ata1: mask=03 ostat0=20 ostat2=30
ata1-master: ATAPI 20 20
ata1-slave: ATAPI 30 30
ata1: mask=03 stat0=20 stat1=30
ata1-master: ATA 25 25
ata1-slave: ATA 25 25
ata1: devices=00
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <AMD 8111 UltraATA/133 controller> [attached!] port 0x1020-0x102f at device 7.1 on pci0
pci0: <PCI to Other bridge (vendor=1022 device=746b)> (vendor=0x1022, dev=0x746b) at 7.3
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROMs> [tentative] at iomem 0xc8000-0xc8fff,0xc9000-0xccfff,0xcd000-0xce7ff,0xce800-0xcffff on isa0
orm0: <Option ROMs> [attached!] at iomem 0xc8000-0xc8fff,0xc9000-0xccfff,0xcd000-0xce7ff,0xce800-0xcffff on isa0
pmtimer0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
fdc0: <NEC 72065B or clone> [tentative] at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0.fdc0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
fd0: <1440-KB 3.5" drive> [tentative] on fdc0 drive 0
fd0: <1440-KB 3.5" drive> [attached!] on fdc0 drive 0
fdc0: <NEC 72065B or clone> [attached!] at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 [tentative] failed to probe at port 0x1f0 irq 14 on isa0
ata3 [tentative] failed to probe at port 0x170 irq 15 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0.isa0.isab1.pci0.pcib0.legacypci0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
sl0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
lo0: bpf attached
ppp0: bpf attached
ata0-slave: ATAPI identify retries exceeded
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <DV-28E-B/1.2B> DVD-ROM drive at ata0 as master
acd0: read 4134KB/s (34515KB/s), 256KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): NOT READY asc:3a,0
(probe0:ata0:0:0:0): Medium not present
pass0 at ata0 bus 0 target 0 lun 0
pass0: <TEAC DV-28E-B 1.2B> Removable CD-ROM SCSI-0 device 
pass0: Serial Number 
pass0: 16.000MB/s transfers
PXE: no interface
no B_DEVMAGIC (bootdev=0)
Mounting root from cd9660:/dev/acd0a
(cd0:ata0:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): NOT READY asc:3a,0
(cd0:ata0:0:0:0): Medium not present
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TEAC DV-28E-B 1.2B> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
iso_mountroot(): using session at block 0
Root mount failed: 5

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> 