e2fsck segmentation fault

[Petr Janda]

Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
       The Regents of the University of California. All rights reserved.
DragonFly 1.7.0-DEVELOPMENT #3: Sun Oct  1 12:18:29 EST 2006
   petr at xxxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/EVELIN
TSC clock: 1799943458 Hz, i8254 clock: 1193102 Hz
CPU: AMD Athlon(tm) 64 Processor 3000+ (1800.08-MHz 686-class CPU)
 Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
 AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory  = 1072562176 (1047424K bytes)
avail memory = 1031827456 (1007644K bytes)
CCMSINIT
Preloaded elf kernel "/kernel" at 0xc058d000.
Preloaded elf module "/modules/snd_emu10k1.ko" at 0xc058d288.
Preloaded elf module "/modules/snd_pcm.ko" at 0xc058d334.
Preloaded elf module "/modules/acpi.ko" at 0xc058d3dc.
sched_ithd: stray interrupt 7
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 3.00
Using $PIR table, 18 entries at 0xc00fde40
sched_ithd: stray interrupt 7
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <K8T890 AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
compare 0
compare 0
compare 0
compare 0
compare 0
compare 0
compare 0
compare 0
compare 0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xc0000000-0xc7ffffff at 
device 0.0 on pci0
pci0: <unknown card> (vendor=0x1106, dev=0x5238) at 0.5
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=1106 device=a238)> irq 11 at device 
2.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <NVidia model 0140 graphics accelerator> at 0.0 irq 11
pcib3: <PCI to PCI bridge (vendor=1106 device=c238)> irq 11 at device 
3.0 on pci0
pci3: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=1106 device=d238)> at device 3.1 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI to PCI bridge (vendor=1106 device=e238)> irq 11 at device 
3.2 on pci0
pci5: <PCI bus> on pcib5
pcib6: <PCI to PCI bridge (vendor=1106 device=f238)> irq 11 at device 
3.3 on pci0
pci6: <PCI bus> on pcib6
fwohci0: <Texas Instruments TSB43AB22/A> mem 
0xd9120000-0xd9123fff,0xd9126000-0xd91267ff at device 8.0 on pci0
fwohci0: Invalid irq 255
fwohci0: Please switch PNP-OS to 'No' in BIOS
pci_cfgintr: 0:8 INTA routed to irq 3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:11:d8:00:00:14:c1:a2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:11:d8:14:c1:a2
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcm0: <Creative EMU10K1> port 0xb000-0xb01f irq 11 at device 11.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec>
acx0: <Texas Instruments TNETW1130 Wireless Adapter> mem 
0xd9100000-0xd911ffff,0xd9124000-0xd9125fff irq 3 at device 12.0 on pci0
acx0: radio type 16
acx0: EEPROM version 5
acx0: MAC address: 00:11:95:5f:2b:ab
ieee80211_load_module: load the wlan_ratectl_amrr module by hand for now.
ieee80211_ratectl_change: can't load requested rate control modulefxp0: 
<Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 
0xd9000000-0xd90fffff,0xd9127000-0xd9127fff irq 5 at device 13.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: MAC address: 00:02:b3:0b:9e:0f
atapci0: <VIA 8237 SATA 150 controller> port 
0xd000-0xd0ff,0xcc00-0xcc0f,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07 
irq 11 at device 15.0 on pci0
ata2: at 0xbc00 on atapci0
ata3: at 0xc400 on atapci0
atapci1: <VIA 8237 ATA133 controller> port 0xd400-0xd40f at device 15.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f at device 16.0 on pci0
pci_cfgintr: 0:16 INTA routed to irq 3
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f at device 16.1 on pci0
pci_cfgintr: 0:16 INTA routed to irq 3
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
ulpt0: Hewlett-Packard DeskJet 930C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ukbd0: Logitech USB Receiver, rev 1.10/30.07, addr 3, iclass 3/1
kbd1 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/30.07, addr 3, iclass 3/1
ums0: 16 buttons and Z dir.
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f at device 16.2 on pci0
pci_cfgintr: 0:16 INTB routed to irq 11
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: port error, restarting port 1
uhub2: port error, giving up port 1
uhci3: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 16.3 on pci0
pci_cfgintr: 0:16 INTB routed to irq 11
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.4
isab0: <PCI to ISA bridge (vendor=1106 device=3227)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
orm0: <Option ROM> at iomem 0xd0000-0xd0fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master UDMA100
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: 76319MB <WDC WD800JD-22JNA0> [155061/16/63] at ata2-master UDMA33
ad6: DMA limited to UDMA33, non-ATA66 cable or device
ad6: 76293MB <WDC WD800JD-75JNA0> [155009/16/63] at ata3-master UDMA33
acd0: DVD-R <PIONEER DVD-RW DVR-109> at ata1-master UDMA66
intr 3 at 7376 < 20000 hz, livelock removed
Mounting root from ufs:/dev/ad4s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW  DVR-109 1.57> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: cd present [2240944 x 2048 byte records]
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=978)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
linux: syscall madvise is obsoleted or not implemented (pid=1002)
pid 1580 (e2fsck), uid 0: exited on signal 11

Petr

Vladimir Mitiouchev wrote:
On 10/17/06, Petr Janda <elekktretterr at xxxxxxxxxxxxxx> wrote:
I didnt create it. its a Xen *image* of ubuntu. Im not trying to run
Xen, im just trying to resize the image. I have to say it again, this is
a filesystem in an .img file.
I undestand. But please, send Your dmesg.