Thinkpad R60: DFly Snapshot install CD doesn't find SATA HD

[Thomas Schlesinger]

Hi,

yesterday, I've got my shiny new Thinkpad R60, but I'm not able to install 
DragonFly (snapshot from last night). The installer doesn't find the (SATA) 
harddisk. FreeBSD 6.2.RC1 and Linux do recognize the ICH7 without any 
problems.

I've attached my dmesg output from DragonFlyBSD and FreeBSD.

Any ideas how to fix it (I've found this thread 
http://leaf.dragonflybsd.org/mailarchive/users/2006-04/msg00011.html, but it 
doesn't have a solution)?

Thanks,
Thomas

Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.7.0-DEVELOPMENT #0: Wed Nov 22 00:28:09 CET 2006
    root at chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1828773111 Hz, i8254 clock: 1193197 Hz
CPU: Genuine Intel(R) CPU           T2400  @ 1.83GHz (1828.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2146238464 (2095936K bytes)
avail memory = 2072748032 (2024168K bytes)
CCMSINIT
Preloaded elf kernel "/kernel" at 0xc074e000.
Preloaded elf module "/modules/acpi.ko" at 0xc074e384.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 15 entries at 0xc00fdea0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <LENOVO TP-7C> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=27a1)> irq 11 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 7145 graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=27d0)> irq 11 at device 28.0 on pci0
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5751M Gigabit Ethernet, ASIC rev. 0x4201> mem 0xee100000-0xee10ffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:16:d3:2d:b8:d5
pcib3: <PCI to PCI bridge (vendor=8086 device=27d2)> irq 11 at device 28.1 on pci0
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x8086, dev=0x4227) at 0.0 irq 11
pcib4: <PCI to PCI bridge (vendor=8086 device=27d4)> irq 11 at device 28.2 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI to PCI bridge (vendor=8086 device=27d6)> irq 11 at device 28.3 on pci0
pci12: <PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 11 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
intr 11 at 50001 > 50000 hz, livelocked limit engaged!
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
pci0: <USB controller> at 29.7 irq 11
pcib6: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci21: <PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 11 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 ATA controller> port 0x1880-0x188f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x27c5) at 31.2 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x27da) at 31.3 irq 11
orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acd0: DVD-R <HL-DT-ST DVDRAM GMA-4082N> at ata0-master PIO4
intr 11 at 7376 < 20000 hz, livelock removed
Mounting root from cd9660:cd0c
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GMA-4082N CX08> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [118208 x 2048 byte records]
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> irq 11 at device 0.1 on pci21
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RC1 #0: Thu Nov 16 05:01:36 UTC 2006
    root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <LENOVO TP-7C   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2400  @ 1.83GHz (1828.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 2146238464 (2046 MB)
avail memory = 2091102208 (1994 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <LENOVO TP-7C> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xee100000-0xee10ffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:16:d3:2d:b8:d5
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci12: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xe4301000-0xe43017ff,0xe4304000-0xe4307fff irq 17 at device 0.1 on pci21
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 0a:00:06:e4:20:41:ce:4c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:06:41:ce:4c
fwe0: Ethernet address: 0a:00:06:41:ce:4c
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7M SATA300 controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
Timecounter "TSC" frequency 1828764146 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0af4014
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acd0: DVDR <HL-DT-ST DVDRAM GMA-4082N/CX08> at ata0-master UDMA33
ad4: 76319MB <HTS541080G9SA00 MB4IC60R> at ata2-master SATA150
Trying to mount root from ufs:/dev/md0