WLAN doesn't work

Thomas Schlesinger schlesinger at netcologne.de
Wed Apr 12 13:11:37 PDT 2006


Hi,

I can't get WLAN to work.

I use an Asus V6800 notebook with ipw2200.

I loaded the wlan module with:

kldload if_iwi

/var/log/messages tells me:

Apr 12 19:51:20 SchlesisNB su: thomas to root on /dev/ttyp1
Apr 12 19:51:26 SchlesisNB kernel: cbb0: <RF5C476 PCI-CardBus Bridge> at 
device 1.0 on pci3
Apr 12 19:51:26 SchlesisNB kernel: cardbus18: <CardBus bus> on cbb0
Apr 12 19:51:26 SchlesisNB kernel: pccard18: <16-bit PCCard bus> on cbb0
Apr 12 19:51:26 SchlesisNB kernel: pcib3: routed slot 1 INTA to irq 255
Apr 12 19:51:26 SchlesisNB kernel: cbb: Unable to map IRQ...
Apr 12 19:51:26 SchlesisNB kernel: device_probe_and_attach: cbb0 attach 
returned 12
Apr 12 19:51:26 SchlesisNB kernel: iwi0: <Intel(R) PRO/Wireless 2200BG 
MiniPCI> mem 0xfbff9000-0xfbff9fff irq 5 at device 2.0 on pci3
Apr 12 19:51:26 SchlesisNB kernel: iwi0: MAC address: 00:12:f0:07:f5:c8
Apr 12 19:51:26 SchlesisNB kernel: iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Apr 12 19:51:26 SchlesisNB kernel: iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 
6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

I set up the connection with (and I'm sure, I've used the correct WEP key)

ifconfig iwi0 inet 192.168.2.101 netmask 255.255.255.0 ssid SchlesisFunknetz 
wepmode on wepkey 0x123456789A up

ifconfig iwi0 tells me:

iwi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::212:f0ff:fe07:f5c8%iwi0 prefixlen 64 scopeid 0x7
        ether 00:12:f0:07:f5:c8
        media: IEEE 802.11 Wireless Ethernet autoselect
        status: no carrier
        ssid SchlesisFunknetz 1:SchlesisFunknetz
        channel -1 authmode OPEN powersavemode OFF powersavesleep 100
        rtsthreshold 2312 protmode CTS txpower 100
        wepmode MIXED weptxkey 1
        wepkey 1:40-bit

This is my dmesg output:
Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.5.2-DEVELOPMENT #0: Tue Apr 11 03:08:02 CEST 2006
    root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1728944888 Hz, i8254 clock: 1193144 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory  = 2147090432 (2096768K bytes)
avail memory = 2073825280 (2025220K bytes)
Preloaded elf kernel "/kernel" at 0xc0711000.
Preloaded elf module "/modules/acpi.ko" at 0xc0711210.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f8660
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2591)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 3150 graphics accelerator> at 0.0 irq 10
pcib2: <PCI to PCI bridge (vendor=8086 device=2660)> at device 28.0 on pci0
pci2: <PCI bus> on pcib2
uhci0: <Intel 82801FB (ICH6) USB controller USB-A> port 0xa480-0xa49f irq 11 
at device 29.0 on pci0
usb0: <Intel 82801FB (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB (ICH6) USB controller USB-B> port 0xa800-0xa81f irq 7 at 
device 29.1 on pci0
usb1: <Intel 82801FB (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB (ICH6) USB controller USB-C> port 0xa880-0xa89f irq 5 at 
device 29.2 on pci0
usb2: <Intel 82801FB (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB (ICH6) USB controller USB-D> port 0xac00-0xac1f irq 10 
at device 29.3 on pci0
usb3: <Intel 82801FB (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 11
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbffc000-0xfbffffff 
irq 5 at device 0.0 on pci3
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
miibus0: <MII bus> on sk0
e1000phy0: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus0
e1000phy0:  1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, 
auto
sk0: MAC address: 00:11:d8:89:ae:62
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: <Ricoh R5C552> mem 0xfbffa800-0xfbffafff irq 10 at device 1.1 on pci3
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:03:2a:34:57
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:e0:18:2a:34:57
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci3: <unknown card> (vendor=0x1180, dev=0x0822) at 1.2 irq 5
pci3: <unknown card> (vendor=0x1180, dev=0x0592) at 1.3 irq 5
pci3: <unknown card> (vendor=0x1180, dev=0x0852) at 1.4 irq 5
pci3: <unknown card> (vendor=0x8086, dev=0x4220) at 2.0 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x266e) at 30.2 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x266d) at 30.3 irq 6
isab0: <PCI to ISA bridge (vendor=8086 device=2641)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6R/RW ATA100 controller> port 
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x266a) at 31.3
orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 57231MB <HTS548060M9AT00> [116280/16/63] at ata0-master UDMA100
acd0: DVD-R <MATSHITAUJ-822D> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata0 bus 0 target 1 lun 0
cd0: <MATSHITA UJ-822D 1.00> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus1: <CardBus bus> on cbb0
pccard1: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus2: <CardBus bus> on cbb0
pccard2: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus3: <CardBus bus> on cbb0
pccard3: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus4: <CardBus bus> on cbb0
pccard4: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus5: <CardBus bus> on cbb0
pccard5: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus6: <CardBus bus> on cbb0
pccard6: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus7: <CardBus bus> on cbb0
pccard7: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus8: <CardBus bus> on cbb0
pccard8: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus9: <CardBus bus> on cbb0
pccard9: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
pcm0: <Intel ICH6 (82801FB)> port 0x9c00-0x9c3f,0x9800-0x98ff mem 
0xdffff400-0xdffff4ff,0xdffff800-0xdffff9ff irq 5 at device 30.2 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus10: <CardBus bus> on cbb0
pccard10: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus11: <CardBus bus> on cbb0
pccard11: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus12: <CardBus bus> on cbb0
pccard12: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus13: <CardBus bus> on cbb0
pccard13: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus14: <CardBus bus> on cbb0
pccard14: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus15: <CardBus bus> on cbb0
pccard15: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus16: <CardBus bus> on cbb0
pccard16: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus17: <CardBus bus> on cbb0
pccard17: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3
cardbus18: <CardBus bus> on cbb0
pccard18: <16-bit PCCard bus> on cbb0
pcib3: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
iwi0: <Intel(R) PRO/Wireless 2200BG MiniPCI> mem 0xfbff9000-0xfbff9fff irq 5 
at device 2.0 on pci3
iwi0: MAC address: 00:12:f0:07:f5:c8
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps

I've also tried to connect with WEP disabled, but didn't have success, too.

Can you see here something wrong?

Thanks,
Thomas





More information about the Users mailing list